Type Alias Module

pub type Module<T> = Pallet<T>;

👎Deprecated: use Pallet instead

Type alias to Pallet, to be used by construct_runtime.

Generated by pallet attribute macro.

Aliased Type

struct Module<T>(/* private fields */);

Implementations

impl<T: Config> Pallet<T>

pub fn create_swap( origin: OriginFor<T>, target: T::AccountId, hashed_proof: HashedProof, action: T::SwapAction, duration: BlockNumberFor<T>, ) -> DispatchResult

Register a new atomic swap, declaring an intention to send funds from origin to target on the current blockchain. The target can claim the fund using the revealed proof. If the fund is not claimed after duration blocks, then the sender can cancel the swap.

The dispatch origin for this call must be Signed.

• target: Receiver of the atomic swap.
• hashed_proof: The blake2_256 hash of the secret proof.
• balance: Funds to be sent from origin.
• duration: Locked duration of the atomic swap. For safety reasons, it is recommended that the revealer uses a shorter duration than the counterparty, to prevent the situation where the revealer reveals the proof too late around the end block.

pub fn claim_swap( origin: OriginFor<T>, proof: Vec<u8>, action: T::SwapAction, ) -> DispatchResult

Claim an atomic swap.

The dispatch origin for this call must be Signed.

• proof: Revealed proof of the claim.
• action: Action defined in the swap, it must match the entry in blockchain. Otherwise the operation fails. This is used for weight calculation.

pub fn cancel_swap( origin: OriginFor<T>, target: T::AccountId, hashed_proof: HashedProof, ) -> DispatchResult

Cancel an atomic swap. Only possible after the originally set duration has passed.

The dispatch origin for this call must be Signed.

• target: Target of the original atomic swap.
• hashed_proof: Hashed proof of the original atomic swap.

Trait Implementations

impl<T: Config> BeforeAllRuntimeMigrations for Pallet<T>

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.

impl<T: Config> Callable<T> for Pallet<T>

type RuntimeCall = Call<T>

impl<T> Clone for Pallet<T>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T: Config> DispatchViewFunction for Pallet<T>

fn dispatch_view_function<O: Output>( id: &ViewFunctionId, input: &mut &[u8], output: &mut O, ) -> Result<(), ViewFunctionDispatchError>

impl<T: Config> GetStorageVersion for Pallet<T>

type InCodeStorageVersion = NoStorageVersionSet

This type is generated by the pallet macro.

fn in_code_storage_version() -> Self::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or [NoStorageVersionSet] if the attribute is missing.

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.

DEPRECATED: Use [Self::current_storage_version] instead.

impl<T: Config> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

fn on_initialize(_n: BlockNumber) -> Weight

Block initialization hook. This is called at the very beginning of block execution.

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution.

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before [Hooks::on_finalize]).

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application.

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet.

fn try_state(_n: BlockNumber) -> Result<(), DispatchError>

Execute the sanity checks of this pallet, per block.

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

Execute some pre-checks prior to a runtime upgrade.

fn post_upgrade(_state: Vec<u8>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade.

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution.

fn integrity_test()

Check the integrity of this pallet’s configuration.

impl<T: Config> IntegrityTest for Pallet<T>

fn integrity_test()

See [Hooks::integrity_test].

impl<T: Config> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

fn offchain_worker(n: BlockNumberFor<T>)

This function is being called after every block import (when fully synced).

impl<T: Config> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

fn on_finalize(n: BlockNumberFor<T>)

See [Hooks::on_finalize].

impl<T: Config> OnGenesis for Pallet<T>

fn on_genesis()

Something that should happen at genesis.

impl<T: Config> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

fn on_idle(n: BlockNumberFor<T>, remaining_weight: Weight) -> Weight

See [Hooks::on_idle].

impl<T: Config> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

fn on_initialize(n: BlockNumberFor<T>) -> Weight

See [Hooks::on_initialize].

impl<T: Config> OnPoll<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

fn on_poll(n: BlockNumberFor<T>, weight: &mut WeightMeter)

Code to execute every now and then at the beginning of the block after inherent application.

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

fn on_runtime_upgrade() -> Weight

See [Hooks::on_runtime_upgrade].

fn pre_upgrade() -> Result<Vec<u8>, TryRuntimeError>

See [Hooks::pre_upgrade].

fn post_upgrade(state: Vec<u8>) -> Result<(), TryRuntimeError>

See [Hooks::post_upgrade].

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

The expected and default behavior of this method is to handle executing pre_upgrade -> on_runtime_upgrade -> post_upgrade hooks for a migration.

impl<T: Config> PalletInfoAccess for Pallet<T>

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn name_hash() -> [u8; 16]

Two128 hash of name.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T: Config> PalletsInfoAccess for Pallet<T>

fn count() -> usize

The number of pallets’ information that this type represents.

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq for Pallet<T>

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: Config> StorageInfoTrait for Pallet<T>

fn storage_info() -> Vec<StorageInfo>

impl<T: Config> TryDecodeEntireStorage for Pallet<T>

fn try_decode_entire_state() -> Result<usize, Vec<TryDecodeEntireStorageError>>

Decode the entire data under the given storage, returning Ok(bytes_decoded) if success.

impl<T: Config> TryState<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

fn try_state( n: BlockNumberFor<T>, _s: TryStateSelect, ) -> Result<(), TryRuntimeError>

Execute the state checks.

impl<T: Config> ViewFunctionIdPrefix for Pallet<T>

fn prefix() -> [u8; 16]

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T> Eq for Pallet<T>