Type Alias Module

pub type Module<T, I = ()> = Pallet<T, I>;

👎Deprecated: use Pallet instead

Type alias to Pallet, to be used by construct_runtime.

Generated by pallet attribute macro.

Aliased Type

struct Module<T, I = ()>(/* private fields */);

Implementations

impl<T: Config<I>, I: 'static> Pallet<T, I>

pub fn add_member( origin: OriginFor<T>, who: <<T as Config>::Lookup as StaticLookup>::Source, ) -> DispatchResultWithPostInfo

Add a member who to the set.

May only be called from T::AddOrigin.

pub fn remove_member( origin: OriginFor<T>, who: <<T as Config>::Lookup as StaticLookup>::Source, ) -> DispatchResultWithPostInfo

Remove a member who from the set.

May only be called from T::RemoveOrigin.

pub fn swap_member( origin: OriginFor<T>, remove: <<T as Config>::Lookup as StaticLookup>::Source, add: <<T as Config>::Lookup as StaticLookup>::Source, ) -> DispatchResultWithPostInfo

Swap out one member remove for another add.

May only be called from T::SwapOrigin.

Prime membership is not passed from remove to add, if extant.

pub fn reset_members( origin: OriginFor<T>, members: Vec<T::AccountId>, ) -> DispatchResult

Change the membership to a new set, disregarding the existing membership. Be nice and pass members pre-sorted.

May only be called from T::ResetOrigin.

pub fn change_key( origin: OriginFor<T>, new: <<T as Config>::Lookup as StaticLookup>::Source, ) -> DispatchResultWithPostInfo

Swap out the sending member for some other key new.

May only be called from Signed origin of a current member.

Prime membership is passed from the origin account to new, if extant.

pub fn set_prime( origin: OriginFor<T>, who: <<T as Config>::Lookup as StaticLookup>::Source, ) -> DispatchResultWithPostInfo

Set the prime member. Must be a current member.

May only be called from T::PrimeOrigin.

pub fn clear_prime(origin: OriginFor<T>) -> DispatchResult

Remove the prime member if it exists.

May only be called from T::PrimeOrigin.

impl<T: Config<I>, I: 'static> Pallet<T, I>

pub fn members() -> BoundedVec<T::AccountId, T::MaxMembers>

The current membership, stored as an ordered Vec.

pub fn prime() -> Option<T::AccountId>

The current prime member, if one exists.

Trait Implementations

impl<T: Config<I>, I: 'static> BeforeAllRuntimeMigrations for Pallet<T, I>

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.

impl<T, I: 'static> Benchmarking for Pallet<T, I>

where T: Config + Config<I>,

fn benchmarks(extra: bool) -> Vec<BenchmarkMetadata>

Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”.

fn run_benchmark( extrinsic: &[u8], c: &[(BenchmarkParameter, u32)], whitelist: &[TrackedStorageKey], verify: bool, internal_repeats: u32, ) -> Result<Vec<BenchmarkResult>, BenchmarkError>

Run the benchmarks for this pallet.

impl<T: Config<I>, I: 'static> Callable<T> for Pallet<T, I>

type RuntimeCall = Call<T, I>

impl<T, I> Clone for Pallet<T, I>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Config<I>, I: 'static> Contains<<T as Config>::AccountId> for Pallet<T, I>

fn contains(t: &T::AccountId) -> bool

Return true if this “contains” the given value t.

impl<T: Config> ContainsLengthBound for Pallet<T>

fn max_len() -> usize

Implementation uses a parameter type so calling is cost-free.

fn min_len() -> usize

Minimum number of elements contained

impl<T, I> Debug for Pallet<T, I>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T: Config<I>, I: 'static> DispatchViewFunction for Pallet<T, I>

fn dispatch_view_function<O: Output>( id: &ViewFunctionId, input: &mut &[u8], output: &mut O, ) -> Result<(), ViewFunctionDispatchError>

impl<T: Config<I>, I: 'static> GetStorageVersion for Pallet<T, I>

type InCodeStorageVersion = StorageVersion

This type is generated by the pallet macro.

fn in_code_storage_version() -> Self::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or [NoStorageVersionSet] if the attribute is missing.

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.

DEPRECATED: Use [Self::current_storage_version] instead.

impl<T: Config<I>, I: 'static> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

fn on_initialize(_n: BlockNumber) -> Weight

Block initialization hook. This is called at the very beginning of block execution.

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution.

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before [Hooks::on_finalize]).

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application.

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet.

fn try_state(_n: BlockNumber) -> Result<(), DispatchError>

Execute the sanity checks of this pallet, per block.

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

Execute some pre-checks prior to a runtime upgrade.

fn post_upgrade(_state: Vec<u8>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade.

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution.

fn integrity_test()

Check the integrity of this pallet’s configuration.

impl<T: Config<I>, I: 'static> IntegrityTest for Pallet<T, I>

fn integrity_test()

See [Hooks::integrity_test].

impl<T: Config<I>, I: 'static> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

fn offchain_worker(n: BlockNumberFor<T>)

This function is being called after every block import (when fully synced).

impl<T: Config<I>, I: 'static> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

fn on_finalize(n: BlockNumberFor<T>)

See [Hooks::on_finalize].

impl<T: Config<I>, I: 'static> OnGenesis for Pallet<T, I>

fn on_genesis()

Something that should happen at genesis.

impl<T: Config<I>, I: 'static> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

fn on_idle(n: BlockNumberFor<T>, remaining_weight: Weight) -> Weight

See [Hooks::on_idle].

impl<T: Config<I>, I: 'static> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

fn on_initialize(n: BlockNumberFor<T>) -> Weight

See [Hooks::on_initialize].

impl<T: Config<I>, I: 'static> OnPoll<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

fn on_poll(n: BlockNumberFor<T>, weight: &mut WeightMeter)

Code to execute every now and then at the beginning of the block after inherent application.

impl<T: Config<I>, I: 'static> OnRuntimeUpgrade for Pallet<T, I>

fn on_runtime_upgrade() -> Weight

See [Hooks::on_runtime_upgrade].

fn pre_upgrade() -> Result<Vec<u8>, TryRuntimeError>

See [Hooks::pre_upgrade].

fn post_upgrade(state: Vec<u8>) -> Result<(), TryRuntimeError>

See [Hooks::post_upgrade].

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

The expected and default behavior of this method is to handle executing pre_upgrade -> on_runtime_upgrade -> post_upgrade hooks for a migration.

impl<T: Config<I>, I: 'static> PalletInfoAccess for Pallet<T, I>

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn name_hash() -> [u8; 16]

Two128 hash of name.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T: Config<I>, I: 'static> PalletsInfoAccess for Pallet<T, I>

fn count() -> usize

The number of pallets’ information that this type represents.

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T, I> PartialEq for Pallet<T, I>

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: Config<I>, I: 'static> SortedMembers<<T as Config>::AccountId> for Pallet<T, I>

fn sorted_members() -> Vec<T::AccountId>

Get a vector of all members in the set, ordered.

fn count() -> usize

Get the number of items in the set.

fn add(new_member: &T::AccountId)

Add an item that would satisfy contains. It does not make sure any other state is correctly maintained or generated.

fn contains(t: &T) -> bool

Return true if this “contains” the given value t.

impl<T: Config<I>, I: 'static> StorageInfoTrait for Pallet<T, I>

fn storage_info() -> Vec<StorageInfo>

impl<T: Config<I>, I: 'static> TryDecodeEntireStorage for Pallet<T, I>

fn try_decode_entire_state() -> Result<usize, Vec<TryDecodeEntireStorageError>>

Decode the entire data under the given storage, returning Ok(bytes_decoded) if success.

impl<T: Config<I>, I: 'static> TryState<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

fn try_state( n: BlockNumberFor<T>, _s: TryStateSelect, ) -> Result<(), TryRuntimeError>

Execute the state checks.

impl<T: Config<I>, I: 'static> ViewFunctionIdPrefix for Pallet<T, I>

fn prefix() -> [u8; 16]

impl<T: Config<I>, I: 'static> WhitelistedStorageKeys for Pallet<T, I>

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T, I> Eq for Pallet<T, I>