referrerpolicy=no-referrer-when-downgrade

Struct polkadot_sdk_frame::traits::tokens::fungibles::UnionOf

pub struct UnionOf<Left, Right, Criterion, AssetKind, AccountId>(/* private fields */);
Expand description

Type to combine two fungibles::* implementations into one union fungibles::* implementation.

§Parameters:

  • Left is fungibles::* implementation that is incorporated into the resulting union.
  • Right is fungibles::* implementation that is incorporated into the resulting union.
  • Criterion determines whether the AssetKind belongs to the Left or Right set.
  • AssetKind is a superset type encompassing asset kinds from Left and Right sets.
  • AccountId is an account identifier type.

Trait Implementations§

§

impl<Left, Right, Criterion, AssetKind, AccountId> AccountTouch<AssetKind, AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Inspect<AccountId> + AccountTouch<<Left as Inspect<AccountId>>::AssetId, AccountId>, Right: Inspect<AccountId> + AccountTouch<<Right as Inspect<AccountId>>::AssetId, AccountId, Balance = <Left as AccountTouch<<Left as Inspect<AccountId>>::AssetId, AccountId>>::Balance>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

type Balance = <Left as AccountTouch<<Left as Inspect<AccountId>>::AssetId, AccountId>>::Balance

The type for currency units of the deposit.
§

fn deposit_required( asset: AssetKind, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as AccountTouch<AssetKind, AccountId>>::Balance

The deposit amount of a native currency required for touching an account of the asset.
§

fn should_touch(asset: AssetKind, who: &AccountId) -> bool

Check if an account for a given asset should be touched to meet the existence requirements.
§

fn touch( asset: AssetKind, who: &AccountId, depositor: &AccountId, ) -> Result<(), DispatchError>

Create an account for who of the asset with a deposit taken from the depositor.
§

impl<Left, Right, Criterion, AssetKind, AccountId> Balanced<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Balanced<AccountId>, Right: Balanced<AccountId, Balance = <Left as Inspect<AccountId>>::Balance>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

type OnDropDebt = ConvertImbalanceDropHandler<<Left as Balanced<AccountId>>::OnDropDebt, <Right as Balanced<AccountId>>::OnDropDebt, <Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId, Criterion, AssetKind, <Left as Inspect<AccountId>>::Balance, AccountId>

The type for managing what happens when an instance of Debt is dropped without being used.
§

type OnDropCredit = ConvertImbalanceDropHandler<<Left as Balanced<AccountId>>::OnDropCredit, <Right as Balanced<AccountId>>::OnDropCredit, <Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId, Criterion, AssetKind, <Left as Inspect<AccountId>>::Balance, AccountId>

The type for managing what happens when an instance of Credit is dropped without being used.
§

fn deposit( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, value: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, ) -> Result<Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit>, DispatchError>

Mints value into the account of who, creating it as needed. Read more
§

fn issue( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt>

Increase the total issuance by amount and return the according imbalance. The imbalance will typically be used to increase an account by the same amount with e.g. resolve_into_existing or resolve_creating. Read more
§

fn pair( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<(Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit>, Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt>), DispatchError>

Produce a pair of imbalances that cancel each other out exactly. Read more
§

fn rescind( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit>

Reduce the total issuance by amount and return the according imbalance. The imbalance will typically be used to reduce an account by the same amount with e.g. settle. Read more
§

fn resolve( who: &AccountId, credit: Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt>, ) -> Result<(), Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt>>

The balance of who is increased in order to counter credit. If the whole of credit cannot be countered, then nothing is changed and the original credit is returned in an Err. Read more
§

fn settle( who: &AccountId, debt: Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit>, preservation: Preservation, ) -> Result<Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt>, Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit>>

The balance of who is decreased in order to counter debt. If the whole of debt cannot be countered, then nothing is changed and the original debt is returned in an Err.
§

fn withdraw( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, value: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, preservation: Preservation, force: Fortitude, ) -> Result<Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt>, DispatchError>

Removes value balance from who account if possible. Read more
§

fn done_rescind(_asset: Self::AssetId, _amount: Self::Balance)

§

fn done_issue(_asset: Self::AssetId, _amount: Self::Balance)

§

fn done_deposit(_asset: Self::AssetId, _who: &AccountId, _amount: Self::Balance)

§

fn done_withdraw( _asset: Self::AssetId, _who: &AccountId, _amount: Self::Balance, )

§

impl<Left, Right, Criterion, AssetKind, AccountId> Balanced<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Balanced<AccountId> + DoneSlash<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, AccountId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance>, Right: Balanced<AccountId, Balance = <Left as Inspect<AccountId>>::Balance, Reason = <Left as Inspect<AccountId>>::Reason> + DoneSlash<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, AccountId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

fn slash( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> (Imbalance<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropCredit, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Balanced<AccountId>>::OnDropDebt>, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance)

Reduce the balance of some funds on hold in an account. Read more
§

impl<Left, Right, Criterion, AssetKind, AccountId> Create<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Inspect<AccountId> + Create<AccountId>, Right: Inspect<AccountId, Balance = <Left as Inspect<AccountId>>::Balance> + Create<AccountId>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

fn create( asset: AssetKind, admin: AccountId, is_sufficient: bool, min_balance: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<(), DispatchError>

Create a new fungible asset.
§

impl<Reason, Balance, Left, Right, Criterion, AssetKind, AccountId> DoneSlash<AssetKind, Reason, AccountId, Balance> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Inspect<AccountId> + DoneSlash<<Left as Inspect<AccountId>>::AssetId, Reason, AccountId, Balance>, Right: Inspect<AccountId> + DoneSlash<<Right as Inspect<AccountId>>::AssetId, Reason, AccountId, Balance>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

fn done_slash( asset: AssetKind, reason: &Reason, who: &AccountId, amount: Balance, )

§

impl<Left, Right, Criterion, AssetKind, AccountId> Inspect<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Inspect<AccountId>, Right: Inspect<AccountId, Balance = <Left as Inspect<AccountId>>::Balance>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

type AssetId = AssetKind

Means of identifying one asset class from another.
§

type Balance = <Left as Inspect<AccountId>>::Balance

Scalar type for representing balance of an account.
§

fn total_issuance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

The total amount of issuance in the system.
§

fn active_issuance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

The total amount of issuance in the system excluding those which are controlled by the system.
§

fn minimum_balance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

The minimum balance any single account may have.
§

fn balance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

Get the balance of who which does not include funds which are exclusively allocated to subsystems of the chain (“on hold” or “reserved”). Read more
§

fn total_balance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

Get the total amount of funds whose ultimate beneficial ownership can be determined as who. Read more
§

fn reducible_balance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, preservation: Preservation, force: Fortitude, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

Get the maximum amount that who can withdraw/transfer successfully based on whether the account should be kept alive (preservation) or whether we are willing to force the transfer and potentially go below user-level restrictions on the minimum amount of the account. Read more
§

fn can_deposit( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, provenance: Provenance, ) -> DepositConsequence

Returns true if the asset balance of who may be increased by amount. Read more
§

fn can_withdraw( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> WithdrawConsequence<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance>

Returns Failed if the asset balance of who may not be decreased by amount, otherwise the consequence.
§

fn asset_exists( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, ) -> bool

Returns true if an asset exists.
§

impl<Left, Right, Criterion, AssetKind, AccountId> Inspect<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Inspect<AccountId>, Right: Inspect<AccountId, Balance = <Left as Inspect<AccountId>>::Balance, Id = <Left as Inspect<AccountId>>::Id>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

type Id = <Left as Inspect<AccountId>>::Id

An identifier for a freeze.
§

fn balance_frozen( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, id: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Id, who: &AccountId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

Amount of funds held in reserve by who for the given id.
§

fn balance_freezable( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

The amount of the balance which can become frozen. Defaults to total_balance().
§

fn can_freeze( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, id: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Id, who: &AccountId, ) -> bool

Returns true if it’s possible to introduce a freeze for the given id onto the account of who. This will be true as long as the implementor supports as many concurrent freeze locks as there are possible values of id.
§

impl<Left, Right, Criterion, AssetKind, AccountId> Inspect<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Inspect<AccountId>, Right: Inspect<AccountId, Balance = <Left as Inspect<AccountId>>::Balance, Reason = <Left as Inspect<AccountId>>::Reason>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

type Reason = <Left as Inspect<AccountId>>::Reason

An identifier for a hold. Used for disambiguating different holds so that they can be individually replaced or removed and funds from one hold don’t accidentally become unreserved or slashed for another.
§

fn reducible_total_balance_on_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, force: Fortitude, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

Get the maximum amount that the total_balance_on_hold of who can be reduced successfully based on whether we are willing to force the reduction and potentially go below user-level restrictions on the minimum amount of the account. Note: This cannot bring the account into an inconsistent state with regards any required existential deposit. Read more
§

fn hold_available( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, ) -> bool

Returns true if it’s possible to place (additional) funds under a hold of a given reason. This may fail if the account has exhausted a limited number of concurrent holds or if it cannot be made to exist (e.g. there is no provider reference). Read more
§

fn total_balance_on_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

Amount of funds on hold (for all hold reasons) of who.
§

fn balance_on_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

Amount of funds on hold (for the given reason) of who.
§

fn can_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> bool

Check to see if some amount of funds of who may be placed on hold for the given reason. Reasons why this may not be true: Read more
§

fn ensure_can_hold( asset: Self::AssetId, reason: &Self::Reason, who: &AccountId, amount: Self::Balance, ) -> Result<(), DispatchError>

Check to see if some amount of funds of who may be placed on hold with the given reason. Reasons why this may not be true: Read more
§

impl<Left, Right, Criterion, AssetKind, AccountId> Mutate<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Mutate<AccountId>, Right: Mutate<AccountId, Balance = <Left as Inspect<AccountId>>::Balance>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId, AccountId: Eq,

§

fn mint_into( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Increase the balance of who by exactly amount, minting new tokens. If that isn’t possible then an Err is returned and nothing is changed.
§

fn burn_from( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, preservation: Preservation, precision: Precision, force: Fortitude, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Decrease the balance of who by at least amount, possibly slightly more in the case of minimum-balance requirements, burning the tokens. If that isn’t possible then an Err is returned and nothing is changed. If successful, the amount of tokens reduced is returned.
§

fn shelve( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Attempt to decrease the asset balance of who by amount. Read more
§

fn restore( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Attempt to increase the asset balance of who by amount. Read more
§

fn transfer( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, source: &AccountId, dest: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, preservation: Preservation, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Transfer funds from one account into another. Read more
§

fn set_balance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance

Simple infallible function to force an account to have a particular balance, good for use in tests and benchmarks but not recommended for production code owing to the lack of error reporting. Read more
§

fn done_mint_into( _asset: Self::AssetId, _who: &AccountId, _amount: Self::Balance, )

§

fn done_burn_from( _asset: Self::AssetId, _who: &AccountId, _amount: Self::Balance, )

§

fn done_shelve(_asset: Self::AssetId, _who: &AccountId, _amount: Self::Balance)

§

fn done_restore(_asset: Self::AssetId, _who: &AccountId, _amount: Self::Balance)

§

fn done_transfer( _asset: Self::AssetId, _source: &AccountId, _dest: &AccountId, _amount: Self::Balance, )

§

impl<Left, Right, Criterion, AssetKind, AccountId> Mutate<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Mutate<AccountId>, Right: Mutate<AccountId, Balance = <Left as Inspect<AccountId>>::Balance, Id = <Left as Inspect<AccountId>>::Id>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

fn set_freeze( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, id: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Id, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<(), DispatchError>

Prevent actions which would reduce the balance of the account of who below the given amount and identify this restriction though the given id. Unlike extend_freeze, any outstanding freeze in place for who under the id are dropped. Read more
§

fn extend_freeze( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, id: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Id, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<(), DispatchError>

Prevent the balance of the account of who from being reduced below the given amount and identify this restriction though the given id. Unlike set_freeze, this does not counteract any pre-existing freezes in place for who under the id. Also unlike set_freeze, in the case that amount is zero, this is no-op and never fails. Read more
§

fn thaw( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, id: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Id, who: &AccountId, ) -> Result<(), DispatchError>

Remove an existing lock.
§

fn set_frozen( asset: Self::AssetId, id: &Self::Id, who: &AccountId, amount: Self::Balance, fortitude: Fortitude, ) -> Result<(), DispatchError>

Attempt to alter the amount frozen under the given id to amount. Read more
§

fn ensure_frozen( asset: Self::AssetId, id: &Self::Id, who: &AccountId, amount: Self::Balance, fortitude: Fortitude, ) -> Result<(), DispatchError>

Attempt to set the amount frozen under the given id to amount, iff this would increase the amount frozen under id. Do nothing otherwise. Read more
§

fn decrease_frozen( asset: Self::AssetId, id: &Self::Id, who: &AccountId, amount: Self::Balance, ) -> Result<(), DispatchError>

Decrease the amount which is being frozen for a particular lock, failing in the case of underflow.
§

fn increase_frozen( asset: Self::AssetId, id: &Self::Id, who: &AccountId, amount: Self::Balance, ) -> Result<(), DispatchError>

Increase the amount which is being frozen for a particular lock, failing in the case that too little balance is available for being frozen.
§

impl<Left, Right, Criterion, AssetKind, AccountId> Mutate<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Mutate<AccountId>, Right: Mutate<AccountId, Balance = <Left as Inspect<AccountId>>::Balance, Reason = <Left as Inspect<AccountId>>::Reason>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

fn hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<(), DispatchError>

Hold some funds in an account. If a hold for reason is already in place, then this will increase it.
§

fn release( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Release up to amount held funds in an account. Read more
§

fn burn_held( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, force: Fortitude, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Attempt to decrease the asset balance of who which is held for the given reason by amount. Read more
§

fn transfer_on_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, source: &AccountId, dest: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, mode: Restriction, force: Fortitude, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Transfer held funds into a destination account. Read more
§

fn transfer_and_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, source: &AccountId, dest: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, preservation: Preservation, force: Fortitude, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Transfer some amount of free balance from source to become owned by dest but on hold for reason. for reason. Read more
§

fn burn_all_held( asset: Self::AssetId, reason: &Self::Reason, who: &AccountId, precision: Precision, force: Fortitude, ) -> Result<Self::Balance, DispatchError>

Attempt to decrease the asset balance of who which is held for the given reason to zero. Read more
§

fn done_hold( _asset: Self::AssetId, _reason: &Self::Reason, _who: &AccountId, _amount: Self::Balance, )

§

fn done_release( _asset: Self::AssetId, _reason: &Self::Reason, _who: &AccountId, _amount: Self::Balance, )

§

fn done_burn_held( _asset: Self::AssetId, _reason: &Self::Reason, _who: &AccountId, _amount: Self::Balance, )

§

fn done_transfer_on_hold( _asset: Self::AssetId, _reason: &Self::Reason, _source: &AccountId, _dest: &AccountId, _amount: Self::Balance, )

§

fn done_transfer_and_hold( _asset: Self::AssetId, _reason: &Self::Reason, _source: &AccountId, _dest: &AccountId, _transferred: Self::Balance, )

§

impl<Left, Right, Criterion, AssetKind, AccountId> Refund<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Inspect<AccountId> + Refund<AccountId>, Right: Inspect<AccountId> + Refund<AccountId, Balance = <Left as Refund<AccountId>>::Balance>, Criterion: Convert<AssetKind, Either<<Left as Refund<AccountId>>::AssetId, <Right as Refund<AccountId>>::AssetId>>, AssetKind: AssetId,

§

type AssetId = AssetKind

Means of identifying one asset class from another.
§

type Balance = <Left as Refund<AccountId>>::Balance

Scalar type for representing deposit balance of an account.
§

fn deposit_held( asset: AssetKind, who: AccountId, ) -> Option<(AccountId, <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Refund<AccountId>>::Balance)>

Returns the amount of account deposit and depositor address, if any.
§

fn refund(asset: AssetKind, who: AccountId) -> Result<(), DispatchError>

Return the deposit (if any) of a target asset account.
§

impl<Left, Right, Criterion, AssetKind, AccountId> Unbalanced<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Unbalanced<AccountId>, Right: Unbalanced<AccountId, Balance = <Left as Inspect<AccountId>>::Balance>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

fn handle_dust( dust: Dust<AccountId, UnionOf<Left, Right, Criterion, AssetKind, AccountId>>, )
where UnionOf<Left, Right, Criterion, AssetKind, AccountId>: Sized,

Do something with the dust which has been destroyed from the system. Dust can be converted into a Credit with the Balanced trait impl.
§

fn write_balance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<Option<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance>, DispatchError>

Forcefully set the balance of who to amount. Read more
§

fn set_total_issuance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, )

Set the total issuance to amount.
§

fn decrease_balance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, preservation: Preservation, force: Fortitude, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Reduce the balance of who by amount. Read more
§

fn increase_balance( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Increase the balance of who by amount. Read more
§

fn handle_raw_dust(asset: Self::AssetId, amount: Self::Balance)

Create some dust and handle it with Self::handle_dust. This is an unbalanced operation and it must only be used when an account is modified in a raw fashion, outside of the entire fungibles API. The amount is capped at Self::minimum_balance() - 1. Read more
§

fn deactivate(_asset: Self::AssetId, _: Self::Balance)

Reduce the active issuance by some amount.
§

fn reactivate(_asset: Self::AssetId, _: Self::Balance)

Increase the active issuance by some amount, up to the outstanding amount reduced.
§

impl<Left, Right, Criterion, AssetKind, AccountId> Unbalanced<AccountId> for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Unbalanced<AccountId>, Right: Unbalanced<AccountId, Balance = <Left as Inspect<AccountId>>::Balance, Reason = <Left as Inspect<AccountId>>::Reason>, Criterion: Convert<AssetKind, Either<<Left as Inspect<AccountId>>::AssetId, <Right as Inspect<AccountId>>::AssetId>>, AssetKind: AssetId,

§

fn set_balance_on_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, ) -> Result<(), DispatchError>

Forcefully set the balance on hold of who to amount. This is independent of any other balances on hold or the main (“free”) balance. Read more
§

fn decrease_balance_on_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Reduce the balance on hold of who by amount. Read more
§

fn increase_balance_on_hold( asset: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::AssetId, reason: &<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Reason, who: &AccountId, amount: <UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, precision: Precision, ) -> Result<<UnionOf<Left, Right, Criterion, AssetKind, AccountId> as Inspect<AccountId>>::Balance, DispatchError>

Increase the balance on hold of who by amount. Read more

Auto Trait Implementations§

§

impl<Left, Right, Criterion, AssetKind, AccountId> Freeze for UnionOf<Left, Right, Criterion, AssetKind, AccountId>

§

impl<Left, Right, Criterion, AssetKind, AccountId> RefUnwindSafe for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: RefUnwindSafe, Right: RefUnwindSafe, Criterion: RefUnwindSafe, AssetKind: RefUnwindSafe, AccountId: RefUnwindSafe,

§

impl<Left, Right, Criterion, AssetKind, AccountId> Send for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Send, Right: Send, Criterion: Send, AssetKind: Send, AccountId: Send,

§

impl<Left, Right, Criterion, AssetKind, AccountId> Sync for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Sync, Right: Sync, Criterion: Sync, AssetKind: Sync, AccountId: Sync,

§

impl<Left, Right, Criterion, AssetKind, AccountId> Unpin for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: Unpin, Right: Unpin, Criterion: Unpin, AssetKind: Unpin, AccountId: Unpin,

§

impl<Left, Right, Criterion, AssetKind, AccountId> UnwindSafe for UnionOf<Left, Right, Criterion, AssetKind, AccountId>
where Left: UnwindSafe, Right: UnwindSafe, Criterion: UnwindSafe, AssetKind: UnwindSafe, AccountId: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckedConversion for T

§

fn checked_from<T>(t: T) -> Option<Self>
where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
§

fn checked_into<T>(self) -> Option<T>
where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T, U> IntoKey<U> for T
where U: FromKey<T>,

§

fn into_key(self) -> U

§

impl<Src, Dest> IntoTuple<Dest> for Src
where Dest: FromTuple<Src>,

§

fn into_tuple(self) -> Dest

§

impl<T> IsType<T> for T

§

fn from_ref(t: &T) -> &T

Cast reference.
§

fn into_ref(&self) -> &T

Cast reference.
§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
§

impl<T, Outer> IsWrappedBy<Outer> for T
where Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
§

impl<T> SaturatedConversion for T

§

fn saturated_from<T>(t: T) -> Self
where Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
§

fn saturated_into<T>(self) -> T
where Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<SS, SP> SupersetOf<SS> for SP
where SS: SubsetOf<SP>,

§

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more
§

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).
§

fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.
§

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T, U> TryIntoKey<U> for T
where U: TryFromKey<T>,

§

type Error = <U as TryFromKey<T>>::Error

§

fn try_into_key(self) -> Result<U, <U as TryFromKey<T>>::Error>

§

impl<S, T> UncheckedInto<T> for S
where T: UncheckedFrom<S>,

§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
§

impl<T, S> UniqueSaturatedInto<T> for S
where T: Bounded, S: TryInto<T>,

§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,