referrerpolicy=no-referrer-when-downgrade
westend_runtime

Type Alias CoretimeAssignmentProvider

Source
pub type CoretimeAssignmentProvider = Pallet<Runtime>;

Aliased Type§

struct CoretimeAssignmentProvider(/* private fields */);

Implementations

Source§

impl<T> Pallet<T>
where T: Config,

Source

pub fn assign_core( core_idx: CoreIndex, begin: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, assignments: Vec<(CoreAssignment, PartsOf57600)>, end_hint: Option<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number>, ) -> Result<(), DispatchError>

Append another assignment for a core.

Important: Only appending is allowed or insertion into the last item. Meaning, all already existing assignments must have a begin smaller or equal than the one passed here. Updating the last entry is supported to allow for making a core assignment multiple calls to assign_core. Thus if you have too much interlacing for e.g. a single UMP message you can split that up into multiple messages, each triggering a call to assign_core, together forming the total assignment.

Inserting arbitrarily causes a DispatchError::DisallowedInsert error.

Trait Implementations

Source§

impl<T> AssignCoretime for Pallet<T>
where T: Config,

Source§

fn assign_coretime(id: Id) -> Result<(), DispatchError>

ONLY USE FOR TESTING OR GENESIS.
Source§

impl<T> AssignmentProvider<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
where T: Config,

Source§

fn push_back_assignment(assignment: Assignment)

Push an assignment back to the front of the queue.

The assignment has not been processed yet. Typically used on session boundaries. Parameters:

  • assignment: The on demand assignment.
Source§

fn pop_assignment_for_core(core_idx: CoreIndex) -> Option<Assignment>

Pops an Assignment from the provider for a specified CoreIndex. Read more
Source§

fn report_processed(assignment: Assignment)

A previously popped Assignment has been fully processed. Read more
Source§

fn get_mock_assignment(_: CoreIndex, para_id: Id) -> Assignment

Push some assignment for mocking/benchmarks purposes. Read more
Source§

fn assignment_duplicated(assignment: &Assignment)

Report that an assignment was duplicated by the scheduler.
Source§

impl<T> BeforeAllRuntimeMigrations for Pallet<T>
where T: Config,

Source§

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.
Source§

impl<T> Callable<T> for Pallet<T>
where T: Config,

Source§

impl<T> Clone for Pallet<T>

Source§

fn clone(&self) -> Pallet<T>

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl<T> Debug for Pallet<T>

Source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
Source§

impl<T> DispatchViewFunction for Pallet<T>
where T: Config,

Source§

fn dispatch_view_function<O>( id: &ViewFunctionId, input: &mut &[u8], output: &mut O, ) -> Result<(), ViewFunctionDispatchError>
where O: Output,

Source§

impl<T> GetStorageVersion for Pallet<T>
where T: Config,

Source§

type InCodeStorageVersion = NoStorageVersionSet

This type is generated by the pallet macro. Read more
Source§

fn in_code_storage_version() -> <Pallet<T> as GetStorageVersion>::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or NoStorageVersionSet if the attribute is missing.
Source§

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.
Source§

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.
DEPRECATED: Use Self::current_storage_version instead. Read more
Source§

impl<T> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
where T: Config,

Source§

fn on_initialize(_n: BlockNumber) -> Weight

Block initialization hook. This is called at the very beginning of block execution. Read more
Source§

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution. Read more
Source§

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before Hooks::on_finalize). Read more
Source§

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application. Read more
Source§

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet. Read more
Source§

fn try_state(_n: BlockNumber) -> Result<(), DispatchError>

Execute the sanity checks of this pallet, per block. Read more
Source§

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

Execute some pre-checks prior to a runtime upgrade. Read more
Source§

fn post_upgrade(_state: Vec<u8>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade. Read more
Source§

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution. Read more
Source§

fn integrity_test()

Check the integrity of this pallet’s configuration. Read more
Source§

impl<T> IntegrityTest for Pallet<T>
where T: Config,

Source§

impl<T> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
where T: Config,

Source§

fn offchain_worker( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, )

This function is being called after every block import (when fully synced). Read more
Source§

impl<T> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
where T: Config,

Source§

fn on_finalize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, )

Source§

impl<T> OnGenesis for Pallet<T>
where T: Config,

Source§

fn on_genesis()

Something that should happen at genesis.
Source§

impl<T> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
where T: Config,

Source§

fn on_idle( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, remaining_weight: Weight, ) -> Weight

Source§

impl<T> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
where T: Config,

Source§

fn on_initialize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, ) -> Weight

Source§

impl<T> OnPoll<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
where T: Config,

Source§

fn on_poll( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, weight: &mut WeightMeter, )

Code to execute every now and then at the beginning of the block after inherent application. Read more
Source§

impl<T> OnRuntimeUpgrade for Pallet<T>
where T: Config,

Source§

fn on_runtime_upgrade() -> Weight

Source§

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

Source§

fn post_upgrade(state: Vec<u8>) -> Result<(), DispatchError>

Source§

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

The expected and default behavior of this method is to handle executing pre_upgrade -> on_runtime_upgrade -> post_upgrade hooks for a migration. Read more
Source§

impl<T> PalletInfoAccess for Pallet<T>
where T: Config,

Source§

fn index() -> usize

Index of the pallet as configured in the runtime.
Source§

fn name() -> &'static str

Name of the pallet as configured in the runtime.
Source§

fn name_hash() -> [u8; 16]

Two128 hash of name.
Source§

fn module_name() -> &'static str

Name of the Rust module containing the pallet.
Source§

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.
Source§

impl<T> PalletsInfoAccess for Pallet<T>
where T: Config,

Source§

fn count() -> usize

The number of pallets’ information that this type represents. Read more
Source§

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.
Source§

impl<T> PartialEq for Pallet<T>

Source§

fn eq(&self, other: &Pallet<T>) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl<T> StorageInfoTrait for Pallet<T>
where T: Config,

Source§

impl<T> TryDecodeEntireStorage for Pallet<T>
where T: Config,

Source§

fn try_decode_entire_state() -> Result<usize, Vec<TryDecodeEntireStorageError>>

Decode the entire data under the given storage, returning Ok(bytes_decoded) if success.
Source§

impl<T> TryState<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
where T: Config,

Source§

fn try_state( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, _s: Select, ) -> Result<(), DispatchError>

Execute the state checks.
Source§

impl<T> ViewFunctionIdPrefix for Pallet<T>
where T: Config,

Source§

fn prefix() -> [u8; 16]

Source§

impl<T> WhitelistedStorageKeys for Pallet<T>
where T: Config,

Source§

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.
Source§

impl<T> Eq for Pallet<T>