Type Alias Lottery

pub type Lottery = Pallet<Runtime>;

Aliased Type

struct Lottery(/* private fields */);

Implementations

impl<T> Pallet<T>

where T: Config,

pub fn buy_ticket( origin: <T as Config>::RuntimeOrigin, call: Box<<T as Config>::RuntimeCall>, ) -> Result<(), DispatchError>

Buy a ticket to enter the lottery.

This extrinsic acts as a passthrough function for call. In all situations where call alone would succeed, this extrinsic should succeed.

If call is successful, then we will attempt to purchase a ticket, which may fail silently. To detect success of a ticket purchase, you should listen for the TicketBought event.

This extrinsic must be called by a signed origin.

pub fn set_calls( origin: <T as Config>::RuntimeOrigin, calls: Vec<<T as Config>::RuntimeCall>, ) -> Result<(), DispatchError>

Set calls in storage which can be used to purchase a lottery ticket.

This function only matters if you use the ValidateCall implementation provided by this pallet, which uses storage to determine the valid calls.

This extrinsic must be called by the Manager origin.

pub fn start_lottery( origin: <T as Config>::RuntimeOrigin, price: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, length: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, delay: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, repeat: bool, ) -> Result<(), DispatchError>

Start a lottery using the provided configuration.

This extrinsic must be called by the ManagerOrigin.

Parameters:

• price: The cost of a single ticket.
• length: How long the lottery should run for starting at the current block.
• delay: How long after the lottery end we should wait before picking a winner.
• repeat: If the lottery should repeat when completed.

pub fn stop_repeat( origin: <T as Config>::RuntimeOrigin, ) -> Result<(), DispatchError>

If a lottery is repeating, you can use this to stop the repeat. The lottery will continue to run to completion.

This extrinsic must be called by the ManagerOrigin.

impl<T> Pallet<T>

where T: Config,

pub fn account_id() -> <T as Config>::AccountId

The account ID of the lottery pot.

This actually does computation. If you need to keep using it, then make sure you cache the value and only call this once.

Trait Implementations

impl<T> BeforeAllRuntimeMigrations for Pallet<T>

where T: Config,

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.

impl<T> Benchmarking for Pallet<T>

where T: Config + Config,

fn benchmarks(extra: bool) -> Vec<BenchmarkMetadata>

Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”.

fn run_benchmark( extrinsic: &[u8], c: &[(BenchmarkParameter, u32)], whitelist: &[TrackedStorageKey], verify: bool, internal_repeats: u32, ) -> Result<Vec<BenchmarkResult>, BenchmarkError>

Run the benchmarks for this pallet.

impl<T> Callable<T> for Pallet<T>

where T: Config,

type RuntimeCall = Call<T>

impl<T> Clone for Pallet<T>

fn clone(&self) -> Pallet<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> DispatchViewFunction for Pallet<T>

where T: Config,

fn dispatch_view_function<O>( id: &ViewFunctionId, input: &mut &[u8], output: &mut O, ) -> Result<(), ViewFunctionDispatchError>

where O: Output,

impl<T> GetStorageVersion for Pallet<T>

where T: Config,

type InCodeStorageVersion = NoStorageVersionSet

This type is generated by the pallet macro.

fn in_code_storage_version() -> <Pallet<T> as GetStorageVersion>::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or NoStorageVersionSet if the attribute is missing.

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.

DEPRECATED: Use Self::current_storage_version instead.

impl<T> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_initialize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, ) -> Weight

Block initialization hook. This is called at the very beginning of block execution.

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution.

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before Hooks::on_finalize).

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application.

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet.

fn try_state(_n: BlockNumber) -> Result<(), DispatchError>

Execute the sanity checks of this pallet, per block.

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

Execute some pre-checks prior to a runtime upgrade.

fn post_upgrade(_state: Vec<u8>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade.

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution.

fn integrity_test()

Check the integrity of this pallet’s configuration.

impl<T> IntegrityTest for Pallet<T>

where T: Config,

fn integrity_test()

See Hooks::integrity_test.

impl<T> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn offchain_worker( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, )

This function is being called after every block import (when fully synced).

impl<T> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_finalize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, )

See Hooks::on_finalize.

impl<T> OnGenesis for Pallet<T>

where T: Config,

fn on_genesis()

Something that should happen at genesis.

impl<T> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_idle( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, remaining_weight: Weight, ) -> Weight

See Hooks::on_idle.

impl<T> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_initialize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, ) -> Weight

See Hooks::on_initialize.

impl<T> OnPoll<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn on_poll( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, weight: &mut WeightMeter, )

Code to execute every now and then at the beginning of the block after inherent application.

impl<T> OnRuntimeUpgrade for Pallet<T>

where T: Config,

fn on_runtime_upgrade() -> Weight

See Hooks::on_runtime_upgrade.

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

See Hooks::pre_upgrade.

fn post_upgrade(state: Vec<u8>) -> Result<(), DispatchError>

See Hooks::post_upgrade.

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

The expected and default behavior of this method is to handle executing pre_upgrade -> on_runtime_upgrade -> post_upgrade hooks for a migration.

impl<T> PalletInfoAccess for Pallet<T>

where T: Config,

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn name_hash() -> [u8; 16]

Two128 hash of name.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T> PalletsInfoAccess for Pallet<T>

where T: Config,

fn count() -> usize

The number of pallets’ information that this type represents.

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq for Pallet<T>

fn eq(&self, other: &Pallet<T>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> StorageInfoTrait for Pallet<T>

where T: Config,

fn storage_info() -> Vec<StorageInfo>

impl<T> TryDecodeEntireStorage for Pallet<T>

where T: Config,

fn try_decode_entire_state() -> Result<usize, Vec<TryDecodeEntireStorageError>>

Decode the entire data under the given storage, returning Ok(bytes_decoded) if success.

impl<T> TryState<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

where T: Config,

fn try_state( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, _s: Select, ) -> Result<(), DispatchError>

Execute the state checks.

impl<T> ValidateCall<T> for Pallet<T>

where T: Config,

fn validate_call(call: &<T as Config>::RuntimeCall) -> bool

impl<T> ViewFunctionIdPrefix for Pallet<T>

where T: Config,

fn prefix() -> [u8; 16]

impl<T> WhitelistedStorageKeys for Pallet<T>

where T: Config,

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T> Eq for Pallet<T>