Enum pallet_asset_conversion::pallet::Event

pub enum Event<T: Config> {
    PoolCreated {
        creator: T::AccountId,
        pool_id: T::PoolId,
        pool_account: T::AccountId,
        lp_token: T::PoolAssetId,
    },
    LiquidityAdded {
        who: T::AccountId,
        mint_to: T::AccountId,
        pool_id: T::PoolId,
        amount1_provided: T::Balance,
        amount2_provided: T::Balance,
        lp_token: T::PoolAssetId,
        lp_token_minted: T::Balance,
    },
    LiquidityRemoved {
        who: T::AccountId,
        withdraw_to: T::AccountId,
        pool_id: T::PoolId,
        amount1: T::Balance,
        amount2: T::Balance,
        lp_token: T::PoolAssetId,
        lp_token_burned: T::Balance,
        withdrawal_fee: Permill,
    },
    SwapExecuted {
        who: T::AccountId,
        send_to: T::AccountId,
        amount_in: T::Balance,
        amount_out: T::Balance,
        path: Vec<(<T as Config>::AssetKind, <T as Config>::Balance)>,
    },
    SwapCreditExecuted {
        amount_in: T::Balance,
        amount_out: T::Balance,
        path: Vec<(<T as Config>::AssetKind, <T as Config>::Balance)>,
    },
    Touched {
        pool_id: T::PoolId,
        who: T::AccountId,
    },
    // some variants omitted
}

The Event enum of this pallet

Variants

PoolCreated

A successful call of the CreatePool extrinsic will create this event.

Fields

creator: T::AccountId

The account that created the pool.

pool_id: T::PoolId

The pool id associated with the pool. Note that the order of the assets may not be the same as the order specified in the create pool extrinsic.

pool_account: T::AccountId

The account ID of the pool.

lp_token: T::PoolAssetId

The id of the liquidity tokens that will be minted when assets are added to this pool.

LiquidityAdded

A successful call of the AddLiquidity extrinsic will create this event.

Fields

who: T::AccountId

The account that the liquidity was taken from.

mint_to: T::AccountId

The account that the liquidity tokens were minted to.

pool_id: T::PoolId

The pool id of the pool that the liquidity was added to.

amount1_provided: T::Balance

The amount of the first asset that was added to the pool.

amount2_provided: T::Balance

The amount of the second asset that was added to the pool.

lp_token: T::PoolAssetId

The id of the lp token that was minted.

lp_token_minted: T::Balance

The amount of lp tokens that were minted of that id.

LiquidityRemoved

A successful call of the RemoveLiquidity extrinsic will create this event.

Fields

who: T::AccountId

The account that the liquidity tokens were burned from.

withdraw_to: T::AccountId

The account that the assets were transferred to.

pool_id: T::PoolId

The pool id that the liquidity was removed from.

amount1: T::Balance

The amount of the first asset that was removed from the pool.

amount2: T::Balance

The amount of the second asset that was removed from the pool.

lp_token: T::PoolAssetId

The id of the lp token that was burned.

lp_token_burned: T::Balance

The amount of lp tokens that were burned of that id.

withdrawal_fee: Permill

Liquidity withdrawal fee (%).

SwapExecuted

Assets have been converted from one to another. Both SwapExactTokenForToken and SwapTokenForExactToken will generate this event.

Fields

who: T::AccountId

Which account was the instigator of the swap.

send_to: T::AccountId

The account that the assets were transferred to.

amount_in: T::Balance

The amount of the first asset that was swapped.

amount_out: T::Balance

The amount of the second asset that was received.

path: Vec<(<T as Config>::AssetKind, <T as Config>::Balance)>

The route of asset IDs with amounts that the swap went through. E.g. (A, amount_in) -> (Dot, amount_out) -> (B, amount_out)

SwapCreditExecuted

Assets have been converted from one to another.

Fields

amount_in: T::Balance

The amount of the first asset that was swapped.

amount_out: T::Balance

The amount of the second asset that was received.

path: Vec<(<T as Config>::AssetKind, <T as Config>::Balance)>

The route of asset IDs with amounts that the swap went through. E.g. (A, amount_in) -> (Dot, amount_out) -> (B, amount_out)

Touched

Pool has been touched in order to fulfill operational requirements.

Fields

pool_id: T::PoolId

The ID of the pool.

who: T::AccountId

The account initiating the touch.

Trait Implementations

impl<T: Config> Clone for Event<T>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Config> Debug for Event<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<T: Config> Decode for Event<T>

where T::AccountId: Decode, T::PoolId: Decode, T::PoolAssetId: Decode, T::Balance: Decode, Vec<(<T as Config>::AssetKind, <T as Config>::Balance)>: Decode,

fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy, ) -> Result<Self, Error>

Attempt to deserialise the value from input.

fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self>, ) -> Result<DecodeFinished, Error>

where I: Input,

Attempt to deserialize the value from input into a pre-allocated piece of memory.

fn skip<I>(input: &mut I) -> Result<(), Error>

where I: Input,

Attempt to skip the encoded value from input.

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type.

impl<T: Config> Encode for Event<T>

where T::AccountId: Encode, T::PoolId: Encode, T::PoolAssetId: Encode, T::Balance: Encode, Vec<(<T as Config>::AssetKind, <T as Config>::Balance)>: Encode,

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding.

fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy, )

Convert self to a slice and append it to the destination.

fn encode(&self) -> Vec<u8>

Convert self to an owned vector.

fn using_encoded<R, F>(&self, f: F) -> R

where F: FnOnce(&[u8]) -> R,

Convert self to a slice and then invoke the given closure with it.

fn encoded_size(&self) -> usize

Calculates the encoded size.

impl<T: Config> From<Event<T>> for ()

fn from(_: Event<T>)

Converts to this type from the input type.

impl<T: Config> PartialEq for Event<T>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> TypeInfo for Event<T>

where T::AccountId: TypeInfo + 'static, T::PoolId: TypeInfo + 'static, T::PoolAssetId: TypeInfo + 'static, T::Balance: TypeInfo + 'static, Vec<(<T as Config>::AssetKind, <T as Config>::Balance)>: TypeInfo + 'static, PhantomData<T>: TypeInfo + 'static, T: Config + 'static,

type Identity = Event<T>

The type identifying for which type info is provided.

fn type_info() -> Type

Returns the static type identifier for Self.

impl<T: Config> EncodeLike for Event<T>

where T::AccountId: Encode, T::PoolId: Encode, T::PoolAssetId: Encode, T::Balance: Encode, Vec<(<T as Config>::AssetKind, <T as Config>::Balance)>: Encode,

impl<T: Config> Eq for Event<T>