Struct pallet_collator_selection::pallet::Pallet

impl<T: Config> Pallet<T>

pub fn set_invulnerables( origin: OriginFor<T>, new: Vec<T::AccountId> ) -> DispatchResult

Set the list of invulnerable (fixed) collators. These collators must do some preparation, namely to have registered session keys.

The call will remove any accounts that have not registered keys from the set. That is, it is non-atomic; the caller accepts all AccountIds passed in new individually as acceptable Invulnerables, and is not proposing a set of new Invulnerables.

This call does not maintain mutual exclusivity of Invulnerables and Candidates. It is recommended to use a batch of add_invulnerable and remove_invulnerable instead. A batch_all can also be used to enforce atomicity. If any candidates are included in new, they should be removed with remove_invulnerable_candidate after execution.

Must be called by the UpdateOrigin.

pub fn set_desired_candidates( origin: OriginFor<T>, max: u32 ) -> DispatchResultWithPostInfo

Set the ideal number of non-invulnerable collators. If lowering this number, then the number of running collators could be higher than this figure. Aside from that edge case, there should be no other way to have more candidates than the desired number.

The origin for this call must be the UpdateOrigin.

pub fn set_candidacy_bond( origin: OriginFor<T>, bond: <<T as Config>::Currency as Currency<<T as SystemConfig>::AccountId>>::Balance ) -> DispatchResultWithPostInfo

Set the candidacy bond amount.

If the candidacy bond is increased by this call, all current candidates which have a deposit lower than the new bond will be kicked from the list and get their deposits back.

The origin for this call must be the UpdateOrigin.

pub fn register_as_candidate(origin: OriginFor<T>) -> DispatchResultWithPostInfo

Register this account as a collator candidate. The account must (a) already have registered session keys and (b) be able to reserve the CandidacyBond.

This call is not available to Invulnerable collators.

pub fn leave_intent(origin: OriginFor<T>) -> DispatchResultWithPostInfo

Deregister origin as a collator candidate. Note that the collator can only leave on session change. The CandidacyBond will be unreserved immediately.

This call will fail if the total number of candidates would drop below MinEligibleCollators.

pub fn add_invulnerable( origin: OriginFor<T>, who: T::AccountId ) -> DispatchResultWithPostInfo

Add a new account who to the list of Invulnerables collators. who must have registered session keys. If who is a candidate, they will be removed.

The origin for this call must be the UpdateOrigin.

pub fn remove_invulnerable( origin: OriginFor<T>, who: T::AccountId ) -> DispatchResult

Remove an account who from the list of Invulnerables collators. Invulnerables must be sorted.

The origin for this call must be the UpdateOrigin.

pub fn update_bond( origin: OriginFor<T>, new_deposit: <<T as Config>::Currency as Currency<<T as SystemConfig>::AccountId>>::Balance ) -> DispatchResultWithPostInfo

Update the candidacy bond of collator candidate origin to a new amount new_deposit.

Setting a new_deposit that is lower than the current deposit while origin is occupying a top-DesiredCandidates slot is not allowed.

This call will fail if origin is not a collator candidate, the updated bond is lower than the minimum candidacy bond, and/or the amount cannot be reserved.

pub fn take_candidate_slot( origin: OriginFor<T>, deposit: <<T as Config>::Currency as Currency<<T as SystemConfig>::AccountId>>::Balance, target: T::AccountId ) -> DispatchResultWithPostInfo

The caller origin replaces a candidate target in the collator candidate list by reserving deposit. The amount deposit reserved by the caller must be greater than the existing bond of the target it is trying to replace.

This call will fail if the caller is already a collator candidate or invulnerable, the caller does not have registered session keys, the target is not a collator candidate, and/or the deposit amount cannot be reserved.

impl<T: Config> Pallet<T>

pub fn account_id() -> T::AccountId

Get a unique, inaccessible account ID from the PotId.

pub fn assemble_collators() -> Vec<T::AccountId>

Assemble the current set of candidates and invulnerables into the next collator set.

This is done on the fly, as frequent as we are told to do so, as the session manager.

pub fn kick_stale_candidates( candidates: impl IntoIterator<Item = T::AccountId> ) -> u32

Kicks out candidates that did not produce a block in the kick threshold and refunds their deposits.

Return value is the number of candidates left in the list.

pub fn do_try_state() -> Result<(), TryRuntimeError>

Ensure the correctness of the state of this pallet.

This should be valid before or after each state transition of this pallet.

§Invariants

§`DesiredCandidates`

The current desired candidate count should not exceed the candidate list capacity.
The number of selected candidates together with the invulnerables must be greater than or equal to the minimum number of eligible collators.

Trait Implementations§

impl<T: Config> BeforeAllRuntimeMigrations for Pallet<T>

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.

impl<T> Benchmarking for Pallet<T>
where T: Config + Config + Config + Config,

fn benchmarks(extra: bool) -> Vec<BenchmarkMetadata>

Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”. Read more

fn run_benchmark( extrinsic: &[u8], c: &[(BenchmarkParameter, u32)], whitelist: &[TrackedStorageKey], verify: bool, internal_repeats: u32 ) -> Result<Vec<BenchmarkResult>, BenchmarkError>

Run the benchmarks for this pallet.

fn clone(&self) -> Self

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Keep track of number of authored blocks per authority, uncles are counted as well since they’re a valid proof of being online.

fn note_author(author: T::AccountId)

Note that the given account ID is the author of the current block.

impl<T: Config> GetStorageVersion for Pallet<T>

type InCodeStorageVersion = StorageVersion

This type is generated by the pallet macro. Read more

fn in_code_storage_version() -> Self::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or [NoStorageVersionSet] if the attribute is missing.

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.

DEPRECATED: Use [Self::current_storage_version] instead. Read more

fn integrity_test()

Check the integrity of this pallet’s configuration. Read more

fn try_state(_: BlockNumberFor<T>) -> Result<(), TryRuntimeError>

Execute the sanity checks of this pallet, per block. Read more

fn on_initialize(_n: BlockNumber) -> Weight

Block initialization hook. This is called at the very beginning of block execution. Read more

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution. Read more

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before [Hooks::on_finalize]). Read more

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application. Read more

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet. Read more

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

Execute some pre-checks prior to a runtime upgrade. Read more

fn post_upgrade(_state: Vec<u8>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade. Read more

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution. Read more

impl<T: Config> IntegrityTest for Pallet<T>

fn integrity_test()

See [Hooks::integrity_test].

fn offchain_worker(n: BlockNumberFor<T>)

This function is being called after every block import (when fully synced). Read more

fn on_finalize(n: BlockNumberFor<T>)

See [Hooks::on_finalize].

impl<T: Config> OnGenesis for Pallet<T>

fn on_genesis()

Something that should happen at genesis.

fn on_idle(n: BlockNumberFor<T>, remaining_weight: Weight) -> Weight

See [Hooks::on_idle].

fn on_initialize(n: BlockNumberFor<T>) -> Weight

See [Hooks::on_initialize].

fn on_poll(n: BlockNumberFor<T>, weight: &mut WeightMeter)

Code to execute every now and then at the beginning of the block after inherent application. Read more

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

fn on_runtime_upgrade() -> Weight

See [Hooks::on_runtime_upgrade].

fn pre_upgrade() -> Result<Vec<u8>, TryRuntimeError>

See [Hooks::pre_upgrade].

fn post_upgrade(state: Vec<u8>) -> Result<(), TryRuntimeError>

See [Hooks::post_upgrade].

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

The expected and default behavior of this method is to handle executing pre_upgrade -> on_runtime_upgrade -> post_upgrade hooks for a migration. Read more

impl<T: Config> PalletInfoAccess for Pallet<T>

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn name_hash() -> [u8; 16]

Two128 hash of name.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T: Config> PalletsInfoAccess for Pallet<T>

fn count() -> usize

The number of pallets’ information that this type represents. Read more

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq for Pallet<T>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: Config> SessionManager<<T as Config>::AccountId> for Pallet<T>

Play the role of the session manager.

fn new_session(index: SessionIndex) -> Option<Vec<T::AccountId>>

Plan a new session, and optionally provide the new validator set. Read more

fn start_session(_: SessionIndex)

Start an already planned session. Read more

fn end_session(_: SessionIndex)

End the session. Read more

fn new_session_genesis(new_index: u32) -> Option<Vec<ValidatorId>>

Same as new_session, but it this should only be called at genesis. Read more

impl<T: Config> StorageInfoTrait for Pallet<T>

fn storage_info() -> Vec<StorageInfo>

impl<T: Config> TryDecodeEntireStorage for Pallet<T>

fn try_decode_entire_state() -> Result<usize, Vec<TryDecodeEntireStorageError>>

Decode the entire data under the given storage, returning Ok(bytes_decoded) if success.

fn try_state( n: BlockNumberFor<T>, _s: TryStateSelect ) -> Result<(), TryRuntimeError>

Execute the state checks.

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T> Eq for Pallet<T>

Auto Trait Implementations§

impl<T> RefUnwindSafe for Pallet<T>
where T: RefUnwindSafe,

impl<T> Send for Pallet<T>
where T: Send,

impl<T> Sync for Pallet<T>
where T: Sync,

impl<T> Unpin for Pallet<T>
where T: Unpin,

impl<T> UnwindSafe for Pallet<T>
where T: UnwindSafe,

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CheckedConversion for T

fn checked_from<T>(t: T) -> Option<Self>
where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more

fn checked_into<T>(self) -> Option<T>
where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> DynClone for T
where T: Clone,

fn __clone_box(&self, _: Private) -> *mut ()

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more