pub enum Error<T> {
Show 38 variants
PoolNotFound,
PoolMemberNotFound,
RewardPoolNotFound,
SubPoolsNotFound,
AccountBelongsToOtherPool,
FullyUnbonding,
MaxUnbondingLimit,
CannotWithdrawAny,
MinimumBondNotMet,
OverflowRisk,
NotDestroying,
NotNominator,
NotKickerOrDestroying,
NotOpen,
MaxPools,
MaxPoolMembers,
CanNotChangeState,
DoesNotHavePermission,
MetadataExceedsMaxLen,
Defensive(DefensiveError),
PartialUnbondNotAllowedPermissionlessly,
MaxCommissionRestricted,
CommissionExceedsMaximum,
CommissionExceedsGlobalMaximum,
CommissionChangeThrottled,
CommissionChangeRateNotAllowed,
NoPendingCommission,
NoCommissionCurrentSet,
PoolIdInUse,
InvalidPoolId,
BondExtraRestricted,
NothingToAdjust,
NothingToSlash,
SlashTooLow,
AlreadyMigrated,
NotMigrated,
NotSupported,
Restricted,
// some variants omitted
}Expand description
The Error enum of this pallet.
Variants§
PoolNotFound
A (bonded) pool id does not exist.
PoolMemberNotFound
An account is not a member.
RewardPoolNotFound
A reward pool does not exist. In all cases this is a system logic error.
SubPoolsNotFound
A sub pool does not exist.
AccountBelongsToOtherPool
An account is already delegating in another pool. An account may only belong to one pool at a time.
FullyUnbonding
The member is fully unbonded (and thus cannot access the bonded and reward pool anymore to, for example, collect rewards).
MaxUnbondingLimit
The member cannot unbond further chunks due to reaching the limit.
CannotWithdrawAny
None of the funds can be withdrawn yet because the bonding duration has not passed.
MinimumBondNotMet
The amount does not meet the minimum bond to either join or create a pool.
The depositor can never unbond to a value less than Pallet::depositor_min_bond. The
caller does not have nominating permissions for the pool. Members can never unbond to a
value below MinJoinBond.
OverflowRisk
The transaction could not be executed due to overflow risk for the pool.
NotDestroying
A pool must be in PoolState::Destroying in order for the depositor to unbond or for
other members to be permissionlessly unbonded.
NotNominator
The caller does not have nominating permissions for the pool.
NotKickerOrDestroying
Either a) the caller cannot make a valid kick or b) the pool is not destroying.
NotOpen
The pool is not open to join
MaxPools
The system is maxed out on pools.
MaxPoolMembers
Too many members in the pool or system.
CanNotChangeState
The pools state cannot be changed.
DoesNotHavePermission
The caller does not have adequate permissions.
MetadataExceedsMaxLen
Metadata exceeds Config::MaxMetadataLen
Defensive(DefensiveError)
Some error occurred that should never happen. This should be reported to the maintainers.
PartialUnbondNotAllowedPermissionlessly
Partial unbonding now allowed permissionlessly.
MaxCommissionRestricted
The pool’s max commission cannot be set higher than the existing value.
CommissionExceedsMaximum
The supplied commission exceeds the max allowed commission.
CommissionExceedsGlobalMaximum
The supplied commission exceeds global maximum commission.
CommissionChangeThrottled
Not enough blocks have surpassed since the last commission update.
CommissionChangeRateNotAllowed
The submitted changes to commission change rate are not allowed.
NoPendingCommission
There is no pending commission to claim.
NoCommissionCurrentSet
No commission current has been set.
PoolIdInUse
Pool id currently in use.
InvalidPoolId
Pool id provided is not correct/usable.
BondExtraRestricted
Bonding extra is restricted to the exact pending reward amount.
NothingToAdjust
No imbalance in the ED deposit for the pool.
NothingToSlash
No slash pending that can be applied to the member.
SlashTooLow
The slash amount is too low to be applied.
AlreadyMigrated
The pool or member delegation has already migrated to delegate stake.
NotMigrated
The pool or member delegation has not migrated yet to delegate stake.
NotSupported
This call is not allowed in the current state of the pallet.
Restricted
Account is restricted from participation in pools. This may happen if the account is staking in another way already.
Trait Implementations§
Source§impl<T> Decode for Error<T>
impl<T> Decode for Error<T>
Source§fn decode<__CodecInputEdqy: Input>(
__codec_input_edqy: &mut __CodecInputEdqy,
) -> Result<Self, Error>
fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy, ) -> Result<Self, Error>
Attempt to deserialise the value from input.
§fn decode_into<I>(
input: &mut I,
dst: &mut MaybeUninit<Self>,
) -> Result<DecodeFinished, Error>where
I: Input,
fn decode_into<I>(
input: &mut I,
dst: &mut MaybeUninit<Self>,
) -> Result<DecodeFinished, Error>where
I: Input,
Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
§fn skip<I>(input: &mut I) -> Result<(), Error>where
I: Input,
fn skip<I>(input: &mut I) -> Result<(), Error>where
I: Input,
Attempt to skip the encoded value from input. Read more
§fn encoded_fixed_size() -> Option<usize>
fn encoded_fixed_size() -> Option<usize>
Returns the fixed encoded size of the type. Read more
Source§impl<T> Encode for Error<T>
impl<T> Encode for Error<T>
Source§fn size_hint(&self) -> usize
fn size_hint(&self) -> usize
If possible give a hint of expected size of the encoding. Read more
Source§fn encode_to<__CodecOutputEdqy: Output + ?Sized>(
&self,
__codec_dest_edqy: &mut __CodecOutputEdqy,
)
fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy, )
Convert self to a slice and append it to the destination.
§fn using_encoded<R, F>(&self, f: F) -> R
fn using_encoded<R, F>(&self, f: F) -> R
Convert self to a slice and then invoke the given closure with it.
§fn encoded_size(&self) -> usize
fn encoded_size(&self) -> usize
Calculates the encoded size. Read more
Source§impl<T> From<DefensiveError> for Error<T>
impl<T> From<DefensiveError> for Error<T>
Source§fn from(e: DefensiveError) -> Error<T>
fn from(e: DefensiveError) -> Error<T>
Converts to this type from the input type.
Source§impl<T> PalletError for Error<T>
impl<T> PalletError for Error<T>
Source§const MAX_ENCODED_SIZE: usize = 2usize
const MAX_ENCODED_SIZE: usize = 2usize
The maximum encoded size for the implementing type. Read more
Source§impl<T> TypeInfo for Error<T>where
PhantomData<T>: TypeInfo + 'static,
T: 'static,
impl<T> TypeInfo for Error<T>where
PhantomData<T>: TypeInfo + 'static,
T: 'static,
impl<T> DecodeWithMemTracking for Error<T>
impl<T> EncodeLike for Error<T>
Auto Trait Implementations§
impl<T> Freeze for Error<T>
impl<T> RefUnwindSafe for Error<T>where
T: RefUnwindSafe,
impl<T> Send for Error<T>where
T: Send,
impl<T> Sync for Error<T>where
T: Sync,
impl<T> Unpin for Error<T>where
T: Unpin,
impl<T> UnwindSafe for Error<T>where
T: UnwindSafe,
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
§impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
§fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
§fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> DecodeAll for Twhere
T: Decode,
impl<T> DecodeAll for Twhere
T: Decode,
§fn decode_all(input: &mut &[u8]) -> Result<T, Error>
fn decode_all(input: &mut &[u8]) -> Result<T, Error>
Decode
Self and consume all of the given input data. Read more§impl<T> DecodeLimit for Twhere
T: Decode,
impl<T> DecodeLimit for Twhere
T: Decode,
§impl<T> DecodeWithMemLimit for Twhere
T: DecodeWithMemTracking,
impl<T> DecodeWithMemLimit for Twhere
T: DecodeWithMemTracking,
§impl<T, U> DefensiveTruncateInto<U> for Twhere
U: DefensiveTruncateFrom<T>,
impl<T, U> DefensiveTruncateInto<U> for Twhere
U: DefensiveTruncateFrom<T>,
§fn defensive_truncate_into(self) -> U
fn defensive_truncate_into(self) -> U
Defensively truncate a value and convert it into its bounded form.
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
Causes
self to use its Binary implementation when Debug-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
Causes
self to use its Display implementation when
Debug-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
Causes
self to use its LowerExp implementation when
Debug-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
Causes
self to use its LowerHex implementation when
Debug-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
Causes
self to use its Octal implementation when Debug-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
Causes
self to use its Pointer implementation when
Debug-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
Causes
self to use its UpperExp implementation when
Debug-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
Causes
self to use its UpperHex implementation when
Debug-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
Formats each item in a sequence. Read more
§impl<T> Hashable for Twhere
T: Codec,
impl<T> Hashable for Twhere
T: Codec,
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read more§impl<Src, Dest> IntoTuple<Dest> for Srcwhere
Dest: FromTuple<Src>,
impl<Src, Dest> IntoTuple<Dest> for Srcwhere
Dest: FromTuple<Src>,
fn into_tuple(self) -> Dest
§impl<T> IsType<T> for T
impl<T> IsType<T> for T
§impl<T, Outer> IsWrappedBy<Outer> for T
impl<T, Outer> IsWrappedBy<Outer> for T
§impl<T> KeyedVec for Twhere
T: Codec,
impl<T> KeyedVec for Twhere
T: Codec,
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
Borrows
self and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
Mutably borrows
self and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
Borrows
self, then passes self.as_ref() into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
Mutably borrows
self, then passes self.as_mut() into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
Borrows
self, then passes self.deref() into the pipe function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
§fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
§fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T. Read more§impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
§fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct
self from the equivalent element of its
superset. Read more§fn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if
self is actually part of its subset T (and can be converted to it).§fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as
self.to_subset but without any property checks. Always succeeds.§fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts
self to the equivalent element of its superset.§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Immutable access to the
Borrow<B> of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
Mutable access to the
BorrowMut<B> of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
Immutable access to the
AsRef<R> view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
Mutable access to the
AsMut<R> view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Immutable access to the
Deref::Target of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Mutable access to the
Deref::Target of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap() only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut() only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
Calls
.tap_borrow() only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
Calls
.tap_borrow_mut() only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
Calls
.tap_ref() only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
Calls
.tap_ref_mut() only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
Calls
.tap_deref() only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<T, U> TryIntoKey<U> for Twhere
U: TryFromKey<T>,
impl<T, U> TryIntoKey<U> for Twhere
U: TryFromKey<T>,
type Error = <U as TryFromKey<T>>::Error
fn try_into_key(self) -> Result<U, <U as TryFromKey<T>>::Error>
§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from.§impl<T, S> UniqueSaturatedInto<T> for S
impl<T, S> UniqueSaturatedInto<T> for S
§fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T.§impl<T> WithPostDispatchInfo for Twhere
T: Into<DispatchError>,
impl<T> WithPostDispatchInfo for Twhere
T: Into<DispatchError>,
§fn with_weight(
self,
actual_weight: Weight,
) -> DispatchErrorWithPostInfo<PostDispatchInfo>
fn with_weight( self, actual_weight: Weight, ) -> DispatchErrorWithPostInfo<PostDispatchInfo>
Call this on your modules custom errors type in order to return a custom weight on error. Read more