Enum pallet_revive::StorageDeposit
source · pub enum StorageDeposit<Balance> {
Refund(Balance),
Charge(Balance),
}
Expand description
The amount of balance that was either charged or refunded in order to pay for storage.
Variants§
Refund(Balance)
The transaction reduced storage consumption.
This means that the specified amount of balance was transferred from the involved deposit accounts to the origin.
Charge(Balance)
The transaction increased storage consumption.
This means that the specified amount of balance was transferred from the origin to the involved deposit accounts.
Implementations§
source§impl<Balance: Zero + Copy> StorageDeposit<Balance>
impl<Balance: Zero + Copy> StorageDeposit<Balance>
sourcepub fn charge_or_zero(&self) -> Balance
pub fn charge_or_zero(&self) -> Balance
Returns how much balance is charged or 0
in case of a refund.
pub fn is_zero(&self) -> bool
source§impl<Balance> StorageDeposit<Balance>
impl<Balance> StorageDeposit<Balance>
sourcepub fn saturating_add(&self, rhs: &Self) -> Self
pub fn saturating_add(&self, rhs: &Self) -> Self
This is essentially a saturating signed add.
sourcepub fn saturating_sub(&self, rhs: &Self) -> Self
pub fn saturating_sub(&self, rhs: &Self) -> Self
This is essentially a saturating signed sub.
Trait Implementations§
source§impl<Balance: Clone> Clone for StorageDeposit<Balance>
impl<Balance: Clone> Clone for StorageDeposit<Balance>
source§fn clone(&self) -> StorageDeposit<Balance>
fn clone(&self) -> StorageDeposit<Balance>
Returns a copy of the value. Read more
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from
source
. Read moresource§impl<Balance> Debug for StorageDeposit<Balance>where
Balance: Debug,
impl<Balance> Debug for StorageDeposit<Balance>where
Balance: Debug,
source§impl<Balance> Decode for StorageDeposit<Balance>where
Balance: Decode,
impl<Balance> Decode for StorageDeposit<Balance>where
Balance: Decode,
source§fn decode<__CodecInputEdqy: Input>(
__codec_input_edqy: &mut __CodecInputEdqy,
) -> Result<Self, Error>
fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy, ) -> Result<Self, Error>
Attempt to deserialise the value from input.
§fn decode_into<I>(
input: &mut I,
dst: &mut MaybeUninit<Self>,
) -> Result<DecodeFinished, Error>where
I: Input,
fn decode_into<I>(
input: &mut I,
dst: &mut MaybeUninit<Self>,
) -> Result<DecodeFinished, Error>where
I: Input,
Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
§fn skip<I>(input: &mut I) -> Result<(), Error>where
I: Input,
fn skip<I>(input: &mut I) -> Result<(), Error>where
I: Input,
Attempt to skip the encoded value from input. Read more
§fn encoded_fixed_size() -> Option<usize>
fn encoded_fixed_size() -> Option<usize>
Returns the fixed encoded size of the type. Read more
source§impl<Balance: Zero> Default for StorageDeposit<Balance>
impl<Balance: Zero> Default for StorageDeposit<Balance>
source§impl<Balance> Encode for StorageDeposit<Balance>where
Balance: Encode,
impl<Balance> Encode for StorageDeposit<Balance>where
Balance: Encode,
source§fn size_hint(&self) -> usize
fn size_hint(&self) -> usize
If possible give a hint of expected size of the encoding. Read more
source§fn encode_to<__CodecOutputEdqy: Output + ?Sized>(
&self,
__codec_dest_edqy: &mut __CodecOutputEdqy,
)
fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy, )
Convert self to a slice and append it to the destination.
§fn using_encoded<R, F>(&self, f: F) -> R
fn using_encoded<R, F>(&self, f: F) -> R
Convert self to a slice and then invoke the given closure with it.
§fn encoded_size(&self) -> usize
fn encoded_size(&self) -> usize
Calculates the encoded size. Read more
source§impl<Balance> MaxEncodedLen for StorageDeposit<Balance>where
Balance: MaxEncodedLen,
impl<Balance> MaxEncodedLen for StorageDeposit<Balance>where
Balance: MaxEncodedLen,
source§fn max_encoded_len() -> usize
fn max_encoded_len() -> usize
Upper bound, in bytes, of the maximum encoded size of this item.
source§impl<Balance: Ord> Ord for StorageDeposit<Balance>
impl<Balance: Ord> Ord for StorageDeposit<Balance>
source§fn cmp(&self, other: &StorageDeposit<Balance>) -> Ordering
fn cmp(&self, other: &StorageDeposit<Balance>) -> Ordering
1.21.0 · source§fn max(self, other: Self) -> Selfwhere
Self: Sized,
fn max(self, other: Self) -> Selfwhere
Self: Sized,
Compares and returns the maximum of two values. Read more
source§impl<Balance: PartialEq> PartialEq for StorageDeposit<Balance>
impl<Balance: PartialEq> PartialEq for StorageDeposit<Balance>
source§fn eq(&self, other: &StorageDeposit<Balance>) -> bool
fn eq(&self, other: &StorageDeposit<Balance>) -> bool
This method tests for
self
and other
values to be equal, and is used
by ==
.source§impl<Balance: PartialOrd> PartialOrd for StorageDeposit<Balance>
impl<Balance: PartialOrd> PartialOrd for StorageDeposit<Balance>
source§fn partial_cmp(&self, other: &StorageDeposit<Balance>) -> Option<Ordering>
fn partial_cmp(&self, other: &StorageDeposit<Balance>) -> Option<Ordering>
1.0.0 · source§fn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for
self
and other
) and is used by the <=
operator. Read moresource§impl<Balance> TypeInfo for StorageDeposit<Balance>where
Balance: TypeInfo + 'static,
impl<Balance> TypeInfo for StorageDeposit<Balance>where
Balance: TypeInfo + 'static,
impl<Balance> EncodeLike for StorageDeposit<Balance>where
Balance: Encode,
impl<Balance: Eq> Eq for StorageDeposit<Balance>
impl<Balance> StructuralPartialEq for StorageDeposit<Balance>
Auto Trait Implementations§
impl<Balance> Freeze for StorageDeposit<Balance>where
Balance: Freeze,
impl<Balance> RefUnwindSafe for StorageDeposit<Balance>where
Balance: RefUnwindSafe,
impl<Balance> Send for StorageDeposit<Balance>where
Balance: Send,
impl<Balance> Sync for StorageDeposit<Balance>where
Balance: Sync,
impl<Balance> Unpin for StorageDeposit<Balance>where
Balance: Unpin,
impl<Balance> UnwindSafe for StorageDeposit<Balance>where
Balance: UnwindSafe,
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
§impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
§fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
§fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
§impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
§fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
§fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
§impl<T> Clear for T
impl<T> Clear for T
§impl<T> Clear for T
impl<T> Clear for T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§default unsafe fn clone_to_uninit(&self, dst: *mut T)
default unsafe fn clone_to_uninit(&self, dst: *mut T)
🔬This is a nightly-only experimental API. (
clone_to_uninit
)§impl<Q, K> Comparable<K> for Q
impl<Q, K> Comparable<K> for Q
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> DecodeAll for Twhere
T: Decode,
impl<T> DecodeAll for Twhere
T: Decode,
§fn decode_all(input: &mut &[u8]) -> Result<T, Error>
fn decode_all(input: &mut &[u8]) -> Result<T, Error>
Decode
Self
and consume all of the given input data. Read more§impl<T> DecodeLimit for Twhere
T: Decode,
impl<T> DecodeLimit for Twhere
T: Decode,
§impl<T> DefensiveMax<T> for Twhere
T: PartialOrd,
impl<T> DefensiveMax<T> for Twhere
T: PartialOrd,
§fn defensive_max(self, other: T) -> T
fn defensive_max(self, other: T) -> T
§fn defensive_strict_max(self, other: T) -> T
fn defensive_strict_max(self, other: T) -> T
§impl<T> DefensiveMin<T> for Twhere
T: PartialOrd,
impl<T> DefensiveMin<T> for Twhere
T: PartialOrd,
§fn defensive_min(self, other: T) -> T
fn defensive_min(self, other: T) -> T
§fn defensive_strict_min(self, other: T) -> T
fn defensive_strict_min(self, other: T) -> T
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key
and return true
if they are equal.source§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key
and return true
if they are equal.§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
§impl<Q, K> Equivalent<K> for Q
impl<Q, K> Equivalent<K> for Q
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
Causes
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
Causes
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
Causes
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
Causes
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
Causes
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
Causes
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
Causes
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
Causes
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
Formats each item in a sequence. Read more
§impl<T> Hashable for Twhere
T: Codec,
impl<T> Hashable for Twhere
T: Codec,
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read more§impl<Src, Dest> IntoTuple<Dest> for Srcwhere
Dest: FromTuple<Src>,
impl<Src, Dest> IntoTuple<Dest> for Srcwhere
Dest: FromTuple<Src>,
fn into_tuple(self) -> Dest
§impl<T> IsType<T> for T
impl<T> IsType<T> for T
§impl<T, Outer> IsWrappedBy<Outer> for T
impl<T, Outer> IsWrappedBy<Outer> for T
§impl<T, Outer> IsWrappedBy<Outer> for T
impl<T, Outer> IsWrappedBy<Outer> for T
§impl<T> KeyedVec for Twhere
T: Codec,
impl<T> KeyedVec for Twhere
T: Codec,
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
Borrows
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
Mutably borrows
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R,
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
Borrows
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
Mutably borrows
self
, then passes self.as_mut()
into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
Borrows
self
, then passes self.deref()
into the pipe function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
§fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
§fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T
. Read more§impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
§fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
§fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T
. Read more§impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
§fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct
self
from the equivalent element of its
superset. Read more§fn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if
self
is actually part of its subset T
(and can be converted to it).§fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as
self.to_subset
but without any property checks. Always succeeds.§fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts
self
to the equivalent element of its superset.§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Immutable access to the
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
Mutable access to the
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
Immutable access to the
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
Mutable access to the
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Immutable access to the
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Mutable access to the
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
Calls
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
Calls
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
Calls
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
Calls
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
Calls
.tap_deref()
only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<T, U> TryIntoKey<U> for Twhere
U: TryFromKey<T>,
impl<T, U> TryIntoKey<U> for Twhere
U: TryFromKey<T>,
type Error = <U as TryFromKey<T>>::Error
fn try_into_key(self) -> Result<U, <U as TryFromKey<T>>::Error>
§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from
.§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from
.§impl<T, S> UniqueSaturatedInto<T> for S
impl<T, S> UniqueSaturatedInto<T> for S
§fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T
.§impl<T, S> UniqueSaturatedInto<T> for S
impl<T, S> UniqueSaturatedInto<T> for S
§fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T
.