Struct pallet_staking::config_preludes::TestDefaultConfig
source · pub struct TestDefaultConfig;
Trait Implementations§
source§impl DefaultConfig for TestDefaultConfig
impl DefaultConfig for TestDefaultConfig
§type Nonce = <TestDefaultConfig as DefaultConfig>::Nonce
type Nonce = <TestDefaultConfig as DefaultConfig>::Nonce
This stores the number of previous transactions associated with a sender account.
§type Hashing = <TestDefaultConfig as DefaultConfig>::Hashing
type Hashing = <TestDefaultConfig as DefaultConfig>::Hashing
The hashing system (algorithm) being used in the runtime (e.g. Blake2).
§type AccountId = <TestDefaultConfig as DefaultConfig>::AccountId
type AccountId = <TestDefaultConfig as DefaultConfig>::AccountId
The user account identifier type for the runtime.
§type Lookup = <TestDefaultConfig as DefaultConfig>::Lookup
type Lookup = <TestDefaultConfig as DefaultConfig>::Lookup
Converting trait to take a source type and convert to
AccountId
. Read more§type MaxConsumers = <TestDefaultConfig as DefaultConfig>::MaxConsumers
type MaxConsumers = <TestDefaultConfig as DefaultConfig>::MaxConsumers
The maximum number of consumers allowed on a single account.
§type AccountData = <TestDefaultConfig as DefaultConfig>::AccountData
type AccountData = <TestDefaultConfig as DefaultConfig>::AccountData
Data to be associated with an account (other than nonce/transaction counter, which this
pallet does regardless).
§type OnNewAccount = <TestDefaultConfig as DefaultConfig>::OnNewAccount
type OnNewAccount = <TestDefaultConfig as DefaultConfig>::OnNewAccount
Handler for when a new account has just been created.
§type OnKilledAccount = <TestDefaultConfig as DefaultConfig>::OnKilledAccount
type OnKilledAccount = <TestDefaultConfig as DefaultConfig>::OnKilledAccount
A function that is invoked when an account has been determined to be dead. Read more
type SystemWeightInfo = <TestDefaultConfig as DefaultConfig>::SystemWeightInfo
§type SS58Prefix = <TestDefaultConfig as DefaultConfig>::SS58Prefix
type SS58Prefix = <TestDefaultConfig as DefaultConfig>::SS58Prefix
The designated SS58 prefix of this chain. Read more
§type BlockWeights = <TestDefaultConfig as DefaultConfig>::BlockWeights
type BlockWeights = <TestDefaultConfig as DefaultConfig>::BlockWeights
Block & extrinsics weights: base values and limits.
§type BlockLength = <TestDefaultConfig as DefaultConfig>::BlockLength
type BlockLength = <TestDefaultConfig as DefaultConfig>::BlockLength
The maximum length of a block (in bytes).
§type DbWeight = <TestDefaultConfig as DefaultConfig>::DbWeight
type DbWeight = <TestDefaultConfig as DefaultConfig>::DbWeight
The weight of runtime database operations the runtime can invoke.
§type RuntimeEvent = ()
type RuntimeEvent = ()
The aggregated event type of the runtime.
§type RuntimeOrigin = ()
type RuntimeOrigin = ()
The
RuntimeOrigin
type used by dispatchable calls.§type RuntimeCall = ()
type RuntimeCall = ()
The aggregated
RuntimeCall
type.§type PalletInfo = ()
type PalletInfo = ()
Provides information about the pallet setup in the runtime. Read more
§type RuntimeTask = ()
type RuntimeTask = ()
The aggregated
RuntimeTask
type.§type BaseCallFilter = <TestDefaultConfig as DefaultConfig>::BaseCallFilter
type BaseCallFilter = <TestDefaultConfig as DefaultConfig>::BaseCallFilter
The basic call filter to use in Origin. All origins are built with this filter as base,
except Root. Read more
§type BlockHashCount = <TestDefaultConfig as DefaultConfig>::BlockHashCount
type BlockHashCount = <TestDefaultConfig as DefaultConfig>::BlockHashCount
Maximum number of block number to block hash mappings to keep (oldest pruned first).
§type OnSetCode = <TestDefaultConfig as DefaultConfig>::OnSetCode
type OnSetCode = <TestDefaultConfig as DefaultConfig>::OnSetCode
What to do if the runtime wants to change the code to something new. Read more
§type SingleBlockMigrations = <TestDefaultConfig as DefaultConfig>::SingleBlockMigrations
type SingleBlockMigrations = <TestDefaultConfig as DefaultConfig>::SingleBlockMigrations
All migrations that should run in the next runtime upgrade. Read more
§type MultiBlockMigrator = <TestDefaultConfig as DefaultConfig>::MultiBlockMigrator
type MultiBlockMigrator = <TestDefaultConfig as DefaultConfig>::MultiBlockMigrator
The migrator that is used to run Multi-Block-Migrations. Read more
§type PreInherents = <TestDefaultConfig as DefaultConfig>::PreInherents
type PreInherents = <TestDefaultConfig as DefaultConfig>::PreInherents
A callback that executes in every block directly before all inherents were applied. Read more
§type PostInherents = <TestDefaultConfig as DefaultConfig>::PostInherents
type PostInherents = <TestDefaultConfig as DefaultConfig>::PostInherents
A callback that executes in every block directly after all inherents were applied. Read more
§type PostTransactions = <TestDefaultConfig as DefaultConfig>::PostTransactions
type PostTransactions = <TestDefaultConfig as DefaultConfig>::PostTransactions
A callback that executes in every block directly after all transactions were applied. Read more
source§impl DefaultConfig for TestDefaultConfig
impl DefaultConfig for TestDefaultConfig
§type RuntimeEvent = ()
type RuntimeEvent = ()
The overarching event type.
§type CurrencyBalance = u128
type CurrencyBalance = u128
Just the
Currency::Balance
type; we have this item to allow us to constrain it to
From<u64>
.§type CurrencyToVote = ()
type CurrencyToVote = ()
Convert a balance into a number used for election calculation. This must fit into a
u64
but is allowed to be sensibly lossy. The u64
is used to communicate with the
[frame_election_provider_support
] crate which accepts u64 numbers and does operations
in 128.
Consequently, the backward convert is used convert the u128s from sp-elections back to a
BalanceOf
.§type NominationsQuota = FixedNominationsQuota<16>
type NominationsQuota = FixedNominationsQuota<16>
Something that defines the maximum number of nominations per nominator.
§type HistoryDepth = ConstU32<84>
type HistoryDepth = ConstU32<84>
Number of eras to keep in history. Read more
§type RewardRemainder = ()
type RewardRemainder = ()
Tokens have been minted and are unused for validator-reward.
See Era payout.
§type Reward = ()
type Reward = ()
Handler for the unbalanced increment when rewarding a staker.
NOTE: in most cases, the implementation of
OnUnbalanced
should modify the total
issuance.§type SessionsPerEra = SessionsPerEra
type SessionsPerEra = SessionsPerEra
Number of sessions per era.
§type BondingDuration = BondingDuration
type BondingDuration = BondingDuration
Number of eras that staked funds must remain bonded for.
§type SlashDeferDuration = ()
type SlashDeferDuration = ()
Number of eras that slashes are deferred by, after computation. Read more
§type SessionInterface = ()
type SessionInterface = ()
Interface for interacting with a session pallet.
§type NextNewSession = ()
type NextNewSession = ()
Something that can estimate the next session change, accurately or as a best effort
guess.
§type MaxExposurePageSize = ConstU32<64>
type MaxExposurePageSize = ConstU32<64>
The maximum size of each
T::ExposurePage
. Read more§type MaxUnlockingChunks = ConstU32<32>
type MaxUnlockingChunks = ConstU32<32>
The maximum number of
unlocking
chunks a StakingLedger
can
have. Effectively determines how many unique eras a staker may be
unbonding in. Read more§type MaxControllersInDeprecationBatch = ConstU32<100>
type MaxControllersInDeprecationBatch = ConstU32<100>
The maximum amount of controller accounts that can be deprecated in one call.
§type EventListeners = ()
type EventListeners = ()
Something that listens to staking updates and performs actions based on the data it
receives. Read more
§type DisablingStrategy = UpToLimitDisablingStrategy
type DisablingStrategy = UpToLimitDisablingStrategy
DisablingStragegy
controls how validators are disabled§type BenchmarkingConfig = TestBenchmarkingConfig
type BenchmarkingConfig = TestBenchmarkingConfig
Some parameters of the benchmarking.
§type WeightInfo = ()
type WeightInfo = ()
Weight information for extrinsics in this pallet.
Auto Trait Implementations§
impl RefUnwindSafe for TestDefaultConfig
impl Send for TestDefaultConfig
impl Sync for TestDefaultConfig
impl Unpin for TestDefaultConfig
impl UnwindSafe for TestDefaultConfig
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
§impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
§fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
§fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
§impl<T> Conv for T
impl<T> Conv for T
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
Causes
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
Causes
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
Causes
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
Causes
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
Causes
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
Causes
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
Causes
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
Causes
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
Formats each item in a sequence. Read more
§impl<T> Instrument for T
impl<T> Instrument for T
§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
§impl<T> IsType<T> for T
impl<T> IsType<T> for T
§impl<T, Outer> IsWrappedBy<Outer> for T
impl<T, Outer> IsWrappedBy<Outer> for T
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere
T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
Borrows
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
Mutably borrows
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> R
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
Borrows
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
Mutably borrows
self
, then passes self.as_mut()
into the pipe
function.§fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
Borrows
self
, then passes self.deref()
into the pipe function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
§fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
§fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T
. Read more§impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SPwhere
SS: SubsetOf<SP>,
§fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct
self
from the equivalent element of its
superset. Read more§fn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if
self
is actually part of its subset T
(and can be converted to it).§fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as
self.to_subset
but without any property checks. Always succeeds.§fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts
self
to the equivalent element of its superset.§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
Immutable access to the
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
Mutable access to the
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
Immutable access to the
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
Mutable access to the
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
Immutable access to the
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
Mutable access to the
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
Calls
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
Calls
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
Calls
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
Calls
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
Calls
.tap_deref()
only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<T, U> TryIntoKey<U> for Twhere
U: TryFromKey<T>,
impl<T, U> TryIntoKey<U> for Twhere
U: TryFromKey<T>,
type Error = <U as TryFromKey<T>>::Error
fn try_into_key(self) -> Result<U, <U as TryFromKey<T>>::Error>
§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from
.§impl<T, S> UniqueSaturatedInto<T> for S
impl<T, S> UniqueSaturatedInto<T> for S
§fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T
.