Struct pallet_vesting :: pallet :: Pallet Copy item path

impl<T: Config> Pallet<T>

pub fn vest(origin: OriginFor<T>) -> DispatchResult

Unlock any vested funds of the sender account.

The dispatch origin for this call must be Signed and the sender must have funds still locked under this pallet.

Emits either VestingCompleted or VestingUpdated.

§Complexity

O(1).

pub fn vest_other( origin: OriginFor<T>, target: <<T as Config>::Lookup as StaticLookup>::Source, ) -> DispatchResult

Unlock any vested funds of a target account.

The dispatch origin for this call must be Signed.

target: The account whose vested funds should be unlocked. Must have funds still locked under this pallet.

Emits either VestingCompleted or VestingUpdated.

§Complexity

O(1).

pub fn vested_transfer( origin: OriginFor<T>, target: <<T as Config>::Lookup as StaticLookup>::Source, schedule: VestingInfo<<<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, BlockNumberFor<T>>, ) -> DispatchResult

Create a vested transfer.

The dispatch origin for this call must be Signed.

target: The account receiving the vested funds.
schedule: The vesting schedule attached to the transfer.

Emits VestingCreated.

NOTE: This will unlock all schedules through the current block.

§Complexity

O(1).

pub fn force_vested_transfer( origin: OriginFor<T>, source: <<T as Config>::Lookup as StaticLookup>::Source, target: <<T as Config>::Lookup as StaticLookup>::Source, schedule: VestingInfo<<<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, BlockNumberFor<T>>, ) -> DispatchResult

Force a vested transfer.

The dispatch origin for this call must be Root.

source: The account whose funds should be transferred.
target: The account that should be transferred the vested funds.
schedule: The vesting schedule attached to the transfer.

Emits VestingCreated.

NOTE: This will unlock all schedules through the current block.

§Complexity

O(1).

pub fn merge_schedules( origin: OriginFor<T>, schedule1_index: u32, schedule2_index: u32, ) -> DispatchResult

Merge two vesting schedules together, creating a new vesting schedule that unlocks over the highest possible start and end blocks. If both schedules have already started the current block will be used as the schedule start; with the caveat that if one schedule is finished by the current block, the other will be treated as the new merged schedule, unmodified.

NOTE: If schedule1_index == schedule2_index this is a no-op. NOTE: This will unlock all schedules through the current block prior to merging. NOTE: If both schedules have ended by the current block, no new schedule will be created and both will be removed.

Merged schedule attributes:

starting_block: MAX(schedule1.starting_block, scheduled2.starting_block, current_block).
ending_block: MAX(schedule1.ending_block, schedule2.ending_block).
locked: schedule1.locked_at(current_block) + schedule2.locked_at(current_block).

The dispatch origin for this call must be Signed.

schedule1_index: index of the first schedule to merge.
schedule2_index: index of the second schedule to merge.

pub fn force_remove_vesting_schedule( origin: OriginFor<T>, target: <T::Lookup as StaticLookup>::Source, schedule_index: u32, ) -> DispatchResultWithPostInfo

Force remove a vesting schedule

The dispatch origin for this call must be Root.

target: An account that has a vesting schedule
schedule_index: The vesting schedule index that should be removed

impl<T: Config> Pallet<T>

pub fn vesting( account: T::AccountId, ) -> Option<BoundedVec<VestingInfo<<<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, BlockNumberFor<T>>, MaxVestingSchedulesGet<T>>>

Trait Implementations§

impl<T: Config> BeforeAllRuntimeMigrations for Pallet<T>

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.

impl<T> Benchmarking for Pallet<T>
where T: Config + Config,

fn benchmarks(extra: bool) -> Vec<BenchmarkMetadata>

Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”. Read more

fn run_benchmark( extrinsic: &[u8], c: &[(BenchmarkParameter, u32)], whitelist: &[TrackedStorageKey], verify: bool, internal_repeats: u32, ) -> Result<Vec<BenchmarkResult>, BenchmarkError>

Run the benchmarks for this pallet.

fn clone(&self) -> Self

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl<T: Config> GetStorageVersion for Pallet<T>

type InCodeStorageVersion = NoStorageVersionSet

This type is generated by the pallet macro. Read more

fn in_code_storage_version() -> Self::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or [NoStorageVersionSet] if the attribute is missing.

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.

DEPRECATED: Use [Self::current_storage_version] instead. Read more

fn integrity_test()

Check the integrity of this pallet’s configuration. Read more

fn on_initialize(_n: BlockNumber) -> Weight

Block initialization hook. This is called at the very beginning of block execution. Read more

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution. Read more

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before [Hooks::on_finalize]). Read more

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application. Read more

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet. Read more

fn try_state(_n: BlockNumber) -> Result<(), DispatchError>

Execute the sanity checks of this pallet, per block. Read more

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

Execute some pre-checks prior to a runtime upgrade. Read more

fn post_upgrade(_state: Vec<u8>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade. Read more

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution. Read more

impl<T: Config> IntegrityTest for Pallet<T>

fn integrity_test()

See [Hooks::integrity_test].

fn offchain_worker(n: BlockNumberFor<T>)

This function is being called after every block import (when fully synced). Read more

fn on_finalize(n: BlockNumberFor<T>)

See [Hooks::on_finalize].

impl<T: Config> OnGenesis for Pallet<T>

fn on_genesis()

Something that should happen at genesis.

fn on_idle(n: BlockNumberFor<T>, remaining_weight: Weight) -> Weight

See [Hooks::on_idle].

fn on_initialize(n: BlockNumberFor<T>) -> Weight

See [Hooks::on_initialize].

fn on_poll(n: BlockNumberFor<T>, weight: &mut WeightMeter)

Code to execute every now and then at the beginning of the block after inherent application. Read more

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

fn on_runtime_upgrade() -> Weight

See [Hooks::on_runtime_upgrade].

fn pre_upgrade() -> Result<Vec<u8>, TryRuntimeError>

See [Hooks::pre_upgrade].

fn post_upgrade(state: Vec<u8>) -> Result<(), TryRuntimeError>

See [Hooks::post_upgrade].

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

The expected and default behavior of this method is to handle executing pre_upgrade -> on_runtime_upgrade -> post_upgrade hooks for a migration. Read more

impl<T: Config> PalletInfoAccess for Pallet<T>

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn name_hash() -> [u8; 16]

Two128 hash of name.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T: Config> PalletsInfoAccess for Pallet<T>

fn count() -> usize

The number of pallets’ information that this type represents. Read more

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq for Pallet<T>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: Config> StorageInfoTrait for Pallet<T>

fn storage_info() -> Vec<StorageInfo>

impl<T: Config> TryDecodeEntireStorage for Pallet<T>

fn try_decode_entire_state() -> Result<usize, Vec<TryDecodeEntireStorageError>>

Decode the entire data under the given storage, returning Ok(bytes_decoded) if success.

fn try_state( n: BlockNumberFor<T>, _s: TryStateSelect, ) -> Result<(), TryRuntimeError>

Execute the state checks.

impl<T: Config> VestedTransfer<<T as Config>::AccountId> for Pallet<T>
where <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance: MaybeSerializeDeserialize + Debug,

An implementation that allows the Vesting Pallet to handle a vested transfer on behalf of another Pallet.

type Currency = <T as Config>::Currency

The currency that this schedule applies to.

type Moment = <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number

The quantity used to denote time; usually just a BlockNumber.

fn vested_transfer( source: &T::AccountId, target: &T::AccountId, locked: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, per_block: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, starting_block: BlockNumberFor<T>, ) -> DispatchResult

Execute a vested transfer from source to target with the given schedule: - locked: The amount to be transferred and for the vesting schedule to apply to. - per_block: The amount to be unlocked each block. (linear vesting) - starting_block: The block where the vesting should start. This block can be in the past or future, and should adjust when the tokens become available to the user. Read more

impl<T: Config> VestingSchedule<<T as Config>::AccountId> for Pallet<T>
where <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance: MaybeSerializeDeserialize + Debug,

fn vesting_balance( who: &T::AccountId, ) -> Option<<<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance>

Get the amount that is currently being vested and cannot be transferred out of this account.

fn add_vesting_schedule( who: &T::AccountId, locked: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, per_block: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, starting_block: BlockNumberFor<T>, ) -> DispatchResult

Adds a vesting schedule to a given account.

If the account has MaxVestingSchedules, an Error is returned and nothing is updated.

On success, a linearly reducing amount of funds will be locked. In order to realise any reduction of the lock over time as it diminishes, the account owner must use vest or vest_other.

Is a no-op if the amount to be vested is zero.

NOTE: This doesn’t alter the free balance of the account.

fn can_add_vesting_schedule( who: &T::AccountId, locked: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, per_block: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, starting_block: BlockNumberFor<T>, ) -> DispatchResult

Ensure we can call add_vesting_schedule without error. This should always be called prior to add_vesting_schedule.

fn remove_vesting_schedule( who: &T::AccountId, schedule_index: u32, ) -> DispatchResult

Remove a vesting schedule for a given account.

type Currency = <T as Config>::Currency

The currency that this schedule applies to.

type Moment = <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number

The quantity used to denote time; usually just a BlockNumber.

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T> Eq for Pallet<T>

Auto Trait Implementations§

impl<T> Freeze for Pallet<T>

impl<T> RefUnwindSafe for Pallet<T>
where T: RefUnwindSafe,

impl<T> Send for Pallet<T>
where T: Send,

impl<T> Sync for Pallet<T>
where T: Sync,

impl<T> Unpin for Pallet<T>
where T: Unpin,

impl<T> UnwindSafe for Pallet<T>
where T: UnwindSafe,

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CheckedConversion for T

fn checked_from<T>(t: T) -> Option<Self>
where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more

fn checked_into<T>(self) -> Option<T>
where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more

impl<T> CloneToUninit for T
where T: Clone,

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dst. Read more

impl<T> Conv for T

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> DynClone for T
where T: Clone,

fn __clone_box(&self, _: Private) -> *mut ()

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more