Struct polkadot_node_subsystem::gen::futures::io::AllowStdIo

pub struct AllowStdIo<T>(/* private fields */);

A simple wrapper type which allows types which implement only implement std::io::Read or std::io::Write to be used in contexts which expect an AsyncRead or AsyncWrite.

If these types issue an error with the kind io::ErrorKind::WouldBlock, it is expected that they will notify the current task on readiness. Synchronous std types should not issue errors of this kind and are safe to use in this context. However, using these types with AllowStdIo will cause the event loop to block, so they should be used with care.

Implementations

impl<T> AllowStdIo<T>

pub fn new(io: T) -> AllowStdIo<T>

Creates a new AllowStdIo from an existing IO object.

pub fn get_ref(&self) -> &T

Returns a reference to the contained IO object.

pub fn get_mut(&mut self) -> &mut T

Returns a mutable reference to the contained IO object.

pub fn into_inner(self) -> T

Consumes self and returns the contained IO object.

Trait Implementations

impl<T> AsyncBufRead for AllowStdIo<T>

where T: BufRead,

fn poll_fill_buf( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, ) -> Poll<Result<&[u8], Error>>

Attempt to return the contents of the internal buffer, filling it with more data from the inner reader if it is empty.

fn consume(self: Pin<&mut AllowStdIo<T>>, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to poll_read.

impl<T> AsyncRead for AllowStdIo<T>

where T: Read,

fn poll_read( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, buf: &mut [u8], ) -> Poll<Result<usize, Error>>

Attempt to read from the AsyncRead into buf.

fn poll_read_vectored( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, bufs: &mut [IoSliceMut<'_>], ) -> Poll<Result<usize, Error>>

Attempt to read from the AsyncRead into bufs using vectored IO operations.

impl<T> AsyncSeek for AllowStdIo<T>

where T: Seek,

fn poll_seek( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, pos: SeekFrom, ) -> Poll<Result<u64, Error>>

Attempt to seek to an offset, in bytes, in a stream.

impl<T> AsyncWrite for AllowStdIo<T>

where T: Write,

fn poll_write( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>

Attempt to write bytes from buf into the object.

fn poll_write_vectored( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>

Attempt to write bytes from bufs into the object using vectored IO operations.

fn poll_flush( self: Pin<&mut AllowStdIo<T>>, _: &mut Context<'_>, ) -> Poll<Result<(), Error>>

Attempt to flush the object, ensuring that any buffered data reach their destination.

fn poll_close( self: Pin<&mut AllowStdIo<T>>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>

Attempt to close the object.

impl<T> BufRead for AllowStdIo<T>

where T: BufRead,

fn fill_buf(&mut self) -> Result<&[u8], Error>

Returns the contents of the internal buffer, filling it with more data from the inner reader if it is empty.

fn consume(&mut self, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to read.

fn has_data_left(&mut self) -> Result<bool, Error>

🔬This is a nightly-only experimental API. (buf_read_has_data_left)

Check if the underlying Read has any data left to be read.

fn read_until(&mut self, byte: u8, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes into buf until the delimiter byte or EOF is reached.

fn skip_until(&mut self, byte: u8) -> Result<usize, Error>

🔬This is a nightly-only experimental API. (bufread_skip_until)

Skip all bytes until the delimiter byte or EOF is reached.

fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until a newline (the 0xA byte) is reached, and append them to the provided String buffer.

fn split(self, byte: u8) -> Split<Self>

where Self: Sized,

Returns an iterator over the contents of this reader split on the byte byte.

fn lines(self) -> Lines<Self>

where Self: Sized,

Returns an iterator over the lines of this reader.

impl<T> Clone for AllowStdIo<T>

where T: Clone,

fn clone(&self) -> AllowStdIo<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for AllowStdIo<T>

where T: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Hash for AllowStdIo<T>

where T: Hash,

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<T> Ord for AllowStdIo<T>

where T: Ord,

fn cmp(&self, other: &AllowStdIo<T>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl<T> PartialEq for AllowStdIo<T>

where T: PartialEq,

fn eq(&self, other: &AllowStdIo<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> PartialOrd for AllowStdIo<T>

where T: PartialOrd,

fn partial_cmp(&self, other: &AllowStdIo<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T> Read for AllowStdIo<T>

where T: Read,

fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf.

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Pull some bytes from this source into the specified buffer.

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Read the exact number of bytes required to fill cursor.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Creates a “by reference” adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

where Self: Sized,

Transforms this Read instance to an Iterator over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R>

where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

where Self: Sized,

Creates an adapter which will read at most limit bytes from it.

impl<T> Seek for AllowStdIo<T>

where T: Seek,

fn seek(&mut self, pos: SeekFrom) -> Result<u64, Error>

Seek to an offset, in bytes, in a stream.

fn rewind(&mut self) -> Result<(), Error>

Rewind to the beginning of a stream.

fn stream_len(&mut self) -> Result<u64, Error>

🔬This is a nightly-only experimental API. (seek_stream_len)

Returns the length of this stream (in bytes).

fn stream_position(&mut self) -> Result<u64, Error>

Returns the current seek position from the start of the stream.

fn seek_relative(&mut self, offset: i64) -> Result<(), Error>

Seeks relative to the current position.

impl<T> Write for AllowStdIo<T>

where T: Write,

fn write(&mut self, buf: &[u8]) -> Result<usize, Error>

Write a buffer into this writer, returning how many bytes were written.

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize, Error>

Like write, except that it writes from a slice of buffers.

fn flush(&mut self) -> Result<(), Error>

Flush this output stream, ensuring that all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Error>

Attempts to write an entire buffer into this writer.

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<(), Error>

Writes a formatted string into this writer, returning any error encountered.

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Writer has an efficient write_vectored implementation.

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<(), Error>

🔬This is a nightly-only experimental API. (write_all_vectored)

Attempts to write multiple buffers into this writer.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Creates a “by reference” adapter for this instance of Write.

impl<T> Copy for AllowStdIo<T>

where T: Copy,

impl<T> Eq for AllowStdIo<T>

where T: Eq,

impl<T> StructuralPartialEq for AllowStdIo<T>

impl<T> Unpin for AllowStdIo<T>