referrerpolicy=no-referrer-when-downgrade

Struct polkadot_sdk_frame::prelude::frame_system::CheckWeight

pub struct CheckWeight<T>(/* private fields */)
where
    T: Config + Send + Sync;
Expand description

Block resource (weight) limit check.

§Transaction Validity

This extension does not influence any fields of TransactionValidity in case the transaction is valid.

Implementations§

§

impl<T> CheckWeight<T>
where T: Send + Sync + Config, <T as Config>::RuntimeCall: Dispatchable<Info = DispatchInfo, PostInfo = PostDispatchInfo>,

pub fn new() -> CheckWeight<T>

Creates new TransactionExtension to check weight of the extrinsic.

pub fn do_validate( info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, len: usize, ) -> Result<(ValidTransaction, u32), TransactionValidityError>

Do the validate checks. This can be applied to both signed and unsigned.

It only checks that the block weight and length limit will not exceed.

Returns the transaction validity and the next block length, to be used in prepare.

pub fn do_prepare( info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, len: usize, next_len: u32, ) -> Result<(), TransactionValidityError>

Do the pre-dispatch checks. This can be applied to both signed and unsigned.

It checks and notes the new weight and length.

pub fn do_post_dispatch( info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, post_info: &<<T as Config>::RuntimeCall as Dispatchable>::PostInfo, ) -> Result<(), TransactionValidityError>

Trait Implementations§

§

impl<T> Clone for CheckWeight<T>
where T: Clone + Config + Send + Sync,

§

fn clone(&self) -> CheckWeight<T>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl<T> Debug for CheckWeight<T>
where T: Config + Send + Sync,

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl<T> Decode for CheckWeight<T>
where T: Config + Send + Sync, PhantomData<T>: Decode,

§

fn decode<__CodecInputEdqy>( __codec_input_edqy: &mut __CodecInputEdqy, ) -> Result<CheckWeight<T>, Error>
where __CodecInputEdqy: Input,

Attempt to deserialise the value from input.
§

fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self>, ) -> Result<DecodeFinished, Error>
where I: Input,

Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
§

fn skip<I>(input: &mut I) -> Result<(), Error>
where I: Input,

Attempt to skip the encoded value from input. Read more
§

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type. Read more
§

impl<T> Default for CheckWeight<T>
where T: Default + Config + Send + Sync,

§

fn default() -> CheckWeight<T>

Returns the “default value” for a type. Read more
§

impl<T> Encode for CheckWeight<T>
where T: Config + Send + Sync, PhantomData<T>: Encode,

§

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding. Read more
§

fn encode_to<__CodecOutputEdqy>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy, )
where __CodecOutputEdqy: Output + ?Sized,

Convert self to a slice and append it to the destination.
§

fn encode(&self) -> Vec<u8>

Convert self to an owned vector.
§

fn using_encoded<__CodecOutputReturn, __CodecUsingEncodedCallback>( &self, f: __CodecUsingEncodedCallback, ) -> __CodecOutputReturn
where __CodecUsingEncodedCallback: FnOnce(&[u8]) -> __CodecOutputReturn,

Convert self to a slice and then invoke the given closure with it.
§

fn encoded_size(&self) -> usize

Calculates the encoded size. Read more
§

impl<T> PartialEq for CheckWeight<T>
where T: PartialEq + Config + Send + Sync,

§

fn eq(&self, other: &CheckWeight<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl<T> TransactionExtension<<T as Config>::RuntimeCall> for CheckWeight<T>
where T: Send + Sync + Config, <T as Config>::RuntimeCall: Dispatchable<Info = DispatchInfo, PostInfo = PostDispatchInfo>,

§

const IDENTIFIER: &'static str = "CheckWeight"

Unique identifier of this signed extension. Read more
§

type Implicit = ()

Any additional data which was known at the time of transaction construction and can be useful in authenticating the transaction. This is determined dynamically in part from the on-chain environment using the implicit function and not directly contained in the transaction itself and therefore is considered “implicit”.
§

type Pre = ()

The type that encodes information that can be passed from prepare to post_dispatch.
§

type Val = u32

The type that encodes information that can be passed from validate to prepare.
§

fn weight(&self, _: &<T as Config>::RuntimeCall) -> Weight

The weight consumed by executing this extension instance fully during transaction dispatch.
§

fn validate( &self, origin: <T as Config>::RuntimeOrigin, _call: &<T as Config>::RuntimeCall, info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, len: usize, _self_implicit: <CheckWeight<T> as TransactionExtension<<T as Config>::RuntimeCall>>::Implicit, _inherited_implication: &impl Encode, _source: TransactionSource, ) -> Result<(ValidTransaction, <CheckWeight<T> as TransactionExtension<<T as Config>::RuntimeCall>>::Val, <<T as Config>::RuntimeCall as Dispatchable>::RuntimeOrigin), TransactionValidityError>

Validate a transaction for the transaction queue. Read more
§

fn prepare( self, val: <CheckWeight<T> as TransactionExtension<<T as Config>::RuntimeCall>>::Val, _origin: &<T as Config>::RuntimeOrigin, _call: &<T as Config>::RuntimeCall, info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, len: usize, ) -> Result<<CheckWeight<T> as TransactionExtension<<T as Config>::RuntimeCall>>::Pre, TransactionValidityError>

Do any pre-flight stuff for a transaction after validation. Read more
§

fn post_dispatch_details( _pre: <CheckWeight<T> as TransactionExtension<<T as Config>::RuntimeCall>>::Pre, info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, post_info: &<<T as Config>::RuntimeCall as Dispatchable>::PostInfo, _len: usize, _result: &Result<(), DispatchError>, ) -> Result<Weight, TransactionValidityError>

Do any post-flight stuff for an extrinsic. Read more
§

fn bare_validate( _call: &<T as Config>::RuntimeCall, info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, len: usize, ) -> Result<ValidTransaction, TransactionValidityError>

Validation logic for bare extrinsics. Read more
§

fn bare_validate_and_prepare( _call: &<T as Config>::RuntimeCall, info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, len: usize, ) -> Result<(), TransactionValidityError>

All pre-flight logic run before dispatching bare extrinsics. Read more
§

fn bare_post_dispatch( info: &<<T as Config>::RuntimeCall as Dispatchable>::Info, post_info: &mut <<T as Config>::RuntimeCall as Dispatchable>::PostInfo, _len: usize, _result: &Result<(), DispatchError>, ) -> Result<(), TransactionValidityError>

Post dispatch logic run after dispatching bare extrinsics. Read more
§

fn implicit(&self) -> Result<Self::Implicit, TransactionValidityError>

Determine any additional data which was known at the time of transaction construction and can be useful in authenticating the transaction. The expected usage of this is to include in any data which is signed and verified as part of transaction validation. Also perform any pre-signature-verification checks and return an error if needed.
§

fn metadata() -> Vec<TransactionExtensionMetadata>

Returns the metadata for this extension. Read more
§

fn post_dispatch( pre: Self::Pre, info: &<Call as Dispatchable>::Info, post_info: &mut <Call as Dispatchable>::PostInfo, len: usize, result: &Result<(), DispatchError>, ) -> Result<(), TransactionValidityError>

A wrapper for post_dispatch_details that refunds the unspent weight consumed by this extension into the post dispatch information. Read more
§

impl<T> TypeInfo for CheckWeight<T>
where T: Config + Send + Sync + 'static, PhantomData<T>: TypeInfo + 'static,

§

type Identity = CheckWeight<T>

The type identifying for which type info is provided. Read more
§

fn type_info() -> Type

Returns the static type identifier for Self.
§

impl<T> EncodeLike for CheckWeight<T>
where T: Config + Send + Sync, PhantomData<T>: Encode,

§

impl<T> Eq for CheckWeight<T>
where T: Eq + Config + Send + Sync,

§

impl<T> StructuralPartialEq for CheckWeight<T>
where T: Config + Send + Sync,

Auto Trait Implementations§

§

impl<T> Freeze for CheckWeight<T>

§

impl<T> RefUnwindSafe for CheckWeight<T>
where T: RefUnwindSafe,

§

impl<T> Send for CheckWeight<T>

§

impl<T> Sync for CheckWeight<T>

§

impl<T> Unpin for CheckWeight<T>
where T: Unpin,

§

impl<T> UnwindSafe for CheckWeight<T>
where T: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckedConversion for T

§

fn checked_from<T>(t: T) -> Option<Self>
where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
§

fn checked_into<T>(self) -> Option<T>
where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> Clear for T
where T: Default + Eq + PartialEq,

§

fn is_clear(&self) -> bool

True iff no bits are set.
§

fn clear() -> T

Return the value of Self that is clear.
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> DecodeAll for T
where T: Decode,

§

fn decode_all(input: &mut &[u8]) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

impl<T> DecodeLimit for T
where T: Decode,

§

fn decode_all_with_depth_limit( limit: u32, input: &mut &[u8], ) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

fn decode_with_depth_limit<I>(limit: u32, input: &mut I) -> Result<T, Error>
where I: Input,

Decode Self with the given maximum recursion depth and advance input by the number of bytes consumed. Read more
§

impl<T, Call> DispatchTransaction<Call> for T

§

type Origin = <Call as Dispatchable>::RuntimeOrigin

The origin type of the transaction.
§

type Info = <Call as Dispatchable>::Info

The info type.
§

type Result = Result<Result<<Call as Dispatchable>::PostInfo, DispatchErrorWithPostInfo<<Call as Dispatchable>::PostInfo>>, TransactionValidityError>

The resultant type.
§

type Val = <T as TransactionExtension<Call>>::Val

The Val of the extension.
§

type Pre = <T as TransactionExtension<Call>>::Pre

The Pre of the extension.
§

fn validate_only( &self, origin: <T as DispatchTransaction<Call>>::Origin, call: &Call, info: &<Call as Dispatchable>::Info, len: usize, source: TransactionSource, extension_version: u8, ) -> Result<(ValidTransaction, <T as TransactionExtension<Call>>::Val, <T as DispatchTransaction<Call>>::Origin), TransactionValidityError>

Just validate a transaction. Read more
§

fn validate_and_prepare( self, origin: <T as DispatchTransaction<Call>>::Origin, call: &Call, info: &<Call as Dispatchable>::Info, len: usize, extension_version: u8, ) -> Result<(<T as TransactionExtension<Call>>::Pre, <T as DispatchTransaction<Call>>::Origin), TransactionValidityError>

Validate and prepare a transaction, ready for dispatch.
§

fn dispatch_transaction( self, origin: <Call as Dispatchable>::RuntimeOrigin, call: Call, info: &<Call as Dispatchable>::Info, len: usize, extension_version: u8, ) -> <T as DispatchTransaction<Call>>::Result

Dispatch a transaction with the given base origin and call.
§

fn test_run( self, origin: <T as DispatchTransaction<Call>>::Origin, call: &Call, info: &<T as DispatchTransaction<Call>>::Info, len: usize, extension_version: u8, substitute: impl FnOnce(<T as DispatchTransaction<Call>>::Origin) -> Result<<Call as Dispatchable>::PostInfo, DispatchErrorWithPostInfo<<Call as Dispatchable>::PostInfo>>, ) -> <T as DispatchTransaction<Call>>::Result

Do everything which would be done in a dispatch_transaction, but instead of executing the call, execute substitute instead. Since this doesn’t actually dispatch the call, it doesn’t need to consume it and so call can be passed as a reference.
source§

impl<T> DynClone for T
where T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Hashable for T
where T: Codec,

§

fn blake2_128(&self) -> [u8; 16]

§

fn blake2_256(&self) -> [u8; 32]

§

fn blake2_128_concat(&self) -> Vec<u8>

§

fn twox_128(&self) -> [u8; 16]

§

fn twox_256(&self) -> [u8; 32]

§

fn twox_64_concat(&self) -> Vec<u8>

§

fn identity(&self) -> Vec<u8>

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T, U> IntoKey<U> for T
where U: FromKey<T>,

§

fn into_key(self) -> U

§

impl<Src, Dest> IntoTuple<Dest> for Src
where Dest: FromTuple<Src>,

§

fn into_tuple(self) -> Dest

§

impl<T> IsType<T> for T

§

fn from_ref(t: &T) -> &T

Cast reference.
§

fn into_ref(&self) -> &T

Cast reference.
§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
§

impl<T, Outer> IsWrappedBy<Outer> for T
where Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> KeyedVec for T
where T: Codec,

§

fn to_keyed_vec(&self, prepend_key: &[u8]) -> Vec<u8>

Return an encoding of Self prepended by given slice.
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
§

impl<T> SaturatedConversion for T

§

fn saturated_from<T>(t: T) -> Self
where Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
§

fn saturated_into<T>(self) -> T
where Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<SS, SP> SupersetOf<SS> for SP
where SS: SubsetOf<SP>,

§

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more
§

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).
§

fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.
§

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T, U> TryIntoKey<U> for T
where U: TryFromKey<T>,

§

type Error = <U as TryFromKey<T>>::Error

§

fn try_into_key(self) -> Result<U, <U as TryFromKey<T>>::Error>

§

impl<S, T> UncheckedInto<T> for S
where T: UncheckedFrom<S>,

§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
§

impl<T, S> UniqueSaturatedInto<T> for S
where T: Bounded, S: TryInto<T>,

§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<S> Codec for S
where S: Decode + Encode,

§

impl<T> EncodeLike<&&T> for T
where T: Encode,

§

impl<T> EncodeLike<&T> for T
where T: Encode,

§

impl<T> EncodeLike<&mut T> for T
where T: Encode,

§

impl<T> EncodeLike<Arc<T>> for T
where T: Encode,

§

impl<T> EncodeLike<Box<T>> for T
where T: Encode,

§

impl<'a, T> EncodeLike<Cow<'a, T>> for T
where T: ToOwned + Encode,

§

impl<T> EncodeLike<Rc<T>> for T
where T: Encode,

§

impl<S> FullCodec for S
where S: Decode + FullEncode,

§

impl<S> FullEncode for S
where S: Encode + EncodeLike,

§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for T
where T: Debug,

§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

§

impl<T> Member for T
where T: Send + Sync + Debug + Eq + PartialEq + Clone + 'static,

§

impl<T> Parameter for T
where T: Codec + EncodeLike + Clone + Eq + Debug + TypeInfo,

source§

impl<T> Scalar for T
where T: 'static + Clone + PartialEq + Debug,

§

impl<T> StaticTypeInfo for T
where T: TypeInfo + 'static,