Struct staging_xcm::v3::XcmBuilder

pub struct XcmBuilder<Call, S: XcmBuilderState> {
    pub state: PhantomData<S>,
    /* private fields */
}

Type used to build XCM programs

Fields

state: PhantomData<S>

Implementations

impl<Call> XcmBuilder<Call, PaymentRequired>

pub fn withdraw_asset( self, arg0: impl Into<MultiAssets>, ) -> XcmBuilder<Call, LoadedHolding>

Withdraw asset(s) (assets) from the ownership of origin and place them into the Holding Register.

• assets: The asset(s) to be withdrawn into holding.

Kind: Command.

Errors:

pub fn reserve_asset_deposited( self, arg0: impl Into<MultiAssets>, ) -> XcmBuilder<Call, LoadedHolding>

Asset(s) (assets) have been received into the ownership of this system on the origin system and equivalent derivatives should be placed into the Holding Register.

• assets: The asset(s) that are minted into holding.

Safety: origin must be trusted to have received and be storing assets such that they may later be withdrawn should this system send a corresponding message.

Kind: Trusted Indication.

Errors:

pub fn receive_teleported_asset( self, arg0: impl Into<MultiAssets>, ) -> XcmBuilder<Call, LoadedHolding>

Asset(s) (assets) have been destroyed on the origin system and equivalent assets should be created and placed into the Holding Register.

• assets: The asset(s) that are minted into the Holding Register.

Safety: origin must be trusted to have irrevocably destroyed the corresponding assets prior as a consequence of sending this message.

Kind: Trusted Indication.

Errors:

pub fn claim_asset( self, assets: impl Into<MultiAssets>, ticket: impl Into<MultiLocation>, ) -> XcmBuilder<Call, LoadedHolding>

Create some assets which are being held on behalf of the origin.

• assets: The assets which are to be claimed. This must match exactly with the assets claimable by the origin of the ticket.
• ticket: The ticket of the asset; this is an abstract identifier to help locate the asset.

Kind: Command

Errors:

impl<Call> XcmBuilder<Call, LoadedHolding>

pub fn clear_origin(self) -> Self

Clear the origin.

This may be used by the XCM author to ensure that later instructions cannot command the authority of the origin (e.g. if they are being relayed from an untrusted source, as often the case with ReserveAssetDeposited).

Safety: No concerns.

Kind: Command.

Errors:

pub fn buy_execution( self, fees: impl Into<MultiAsset>, weight_limit: impl Into<WeightLimit>, ) -> XcmBuilder<Call, AnythingGoes>

Pay for the execution of some XCM xcm and orders with up to weight picoseconds of execution time, paying for this with up to fees from the Holding Register.

• fees: The asset(s) to remove from the Holding Register to pay for fees.
• weight_limit: The maximum amount of weight to purchase; this must be at least the expected maximum weight of the total XCM to be executed for the AllowTopLevelPaidExecutionFrom barrier to allow the XCM be executed.

Kind: Command

Errors:

impl<Call> XcmBuilder<Call, ExplicitUnpaidRequired>

pub fn unpaid_execution( self, weight_limit: impl Into<WeightLimit>, check_origin: impl Into<Option<MultiLocation>>, ) -> XcmBuilder<Call, AnythingGoes>

A directive to indicate that the origin expects free execution of the message.

At execution time, this instruction just does a check on the Origin register. However, at the barrier stage messages starting with this instruction can be disregarded if the origin is not acceptable for free execution or the weight_limit is Limited and insufficient.

Kind: Indication

Errors: If the given origin is Some and not equal to the current Origin register.

impl<Call> XcmBuilder<Call, AnythingGoes>

pub fn withdraw_asset(self, arg0: impl Into<MultiAssets>) -> Self

Withdraw asset(s) (assets) from the ownership of origin and place them into the Holding Register.

• assets: The asset(s) to be withdrawn into holding.

Kind: Command.

Errors:

pub fn reserve_asset_deposited(self, arg0: impl Into<MultiAssets>) -> Self

Asset(s) (assets) have been received into the ownership of this system on the origin system and equivalent derivatives should be placed into the Holding Register.

• assets: The asset(s) that are minted into holding.

Safety: origin must be trusted to have received and be storing assets such that they may later be withdrawn should this system send a corresponding message.

Kind: Trusted Indication.

Errors:

pub fn receive_teleported_asset(self, arg0: impl Into<MultiAssets>) -> Self

Asset(s) (assets) have been destroyed on the origin system and equivalent assets should be created and placed into the Holding Register.

• assets: The asset(s) that are minted into the Holding Register.

Safety: origin must be trusted to have irrevocably destroyed the corresponding assets prior as a consequence of sending this message.

Kind: Trusted Indication.

Errors:

pub fn query_response( self, query_id: impl Into<QueryId>, response: impl Into<Response>, max_weight: impl Into<Weight>, querier: impl Into<Option<MultiLocation>>, ) -> Self

Respond with information that the local system is expecting.

• query_id: The identifier of the query that resulted in this message being sent.
• response: The message content.
• max_weight: The maximum weight that handling this response should take.
• querier: The location responsible for the initiation of the response, if there is one. In general this will tend to be the same location as the receiver of this message. NOTE: As usual, this is interpreted from the perspective of the receiving consensus system.

Safety: Since this is information only, there are no immediate concerns. However, it should be remembered that even if the Origin behaves reasonably, it can always be asked to make a response to a third-party chain who may or may not be expecting the response. Therefore the querier should be checked to match the expected value.

Kind: Information.

Errors:

pub fn transfer_asset( self, assets: impl Into<MultiAssets>, beneficiary: impl Into<MultiLocation>, ) -> Self

Withdraw asset(s) (assets) from the ownership of origin and place equivalent assets under the ownership of beneficiary.

• assets: The asset(s) to be withdrawn.
• beneficiary: The new owner for the assets.

Safety: No concerns.

Kind: Command.

Errors:

pub fn transfer_reserve_asset( self, assets: impl Into<MultiAssets>, dest: impl Into<MultiLocation>, xcm: impl Into<Xcm<()>>, ) -> Self

Withdraw asset(s) (assets) from the ownership of origin and place equivalent assets under the ownership of dest within this consensus system (i.e. its sovereign account).

Send an onward XCM message to dest of ReserveAssetDeposited with the given xcm.

• assets: The asset(s) to be withdrawn.
• dest: The location whose sovereign account will own the assets and thus the effective beneficiary for the assets and the notification target for the reserve asset deposit message.
• xcm: The instructions that should follow the ReserveAssetDeposited instruction, which is sent onwards to dest.

Safety: No concerns.

Kind: Command.

Errors:

pub fn transact( self, origin_kind: impl Into<OriginKind>, require_weight_at_most: impl Into<Weight>, call: impl Into<DoubleEncoded<Call>>, ) -> Self

Apply the encoded transaction call, whose dispatch-origin should be origin as expressed by the kind of origin origin_kind.

The Transact Status Register is set according to the result of dispatching the call.

• origin_kind: The means of expressing the message origin as a dispatch origin.
• require_weight_at_most: The weight of call; this should be at least the chain’s calculated weight and will be used in the weight determination arithmetic.
• call: The encoded transaction to be applied.

Safety: No concerns.

Kind: Command.

Errors:

pub fn hrmp_new_channel_open_request( self, sender: impl Into<u32>, max_message_size: impl Into<u32>, max_capacity: impl Into<u32>, ) -> Self

A message to notify about a new incoming HRMP channel. This message is meant to be sent by the relay-chain to a para.

• sender: The sender in the to-be opened channel. Also, the initiator of the channel opening.
• max_message_size: The maximum size of a message proposed by the sender.
• max_capacity: The maximum number of messages that can be queued in the channel.

Safety: The message should originate directly from the relay-chain.

Kind: System Notification

pub fn hrmp_channel_accepted(self, recipient: impl Into<u32>) -> Self

A message to notify about that a previously sent open channel request has been accepted by the recipient. That means that the channel will be opened during the next relay-chain session change. This message is meant to be sent by the relay-chain to a para.

Safety: The message should originate directly from the relay-chain.

Kind: System Notification

Errors:

pub fn hrmp_channel_closing( self, initiator: impl Into<u32>, sender: impl Into<u32>, recipient: impl Into<u32>, ) -> Self

A message to notify that the other party in an open channel decided to close it. In particular, initiator is going to close the channel opened from sender to the recipient. The close will be enacted at the next relay-chain session change. This message is meant to be sent by the relay-chain to a para.

Safety: The message should originate directly from the relay-chain.

Kind: System Notification

Errors:

pub fn clear_origin(self) -> Self

Clear the origin.

This may be used by the XCM author to ensure that later instructions cannot command the authority of the origin (e.g. if they are being relayed from an untrusted source, as often the case with ReserveAssetDeposited).

Safety: No concerns.

Kind: Command.

Errors:

pub fn descend_origin(self, arg0: impl Into<InteriorMultiLocation>) -> Self

Mutate the origin to some interior location.

Kind: Command

Errors:

pub fn report_error(self, arg0: impl Into<QueryResponseInfo>) -> Self

Immediately report the contents of the Error Register to the given destination via XCM.

A QueryResponse message of type ExecutionOutcome is sent to the described destination.

• response_info: Information for making the response.

Kind: Command

Errors:

pub fn deposit_asset( self, assets: impl Into<MultiAssetFilter>, beneficiary: impl Into<MultiLocation>, ) -> Self

Remove the asset(s) (assets) from the Holding Register and place equivalent assets under the ownership of beneficiary within this consensus system.

• assets: The asset(s) to remove from holding.
• beneficiary: The new owner for the assets.

Kind: Command

Errors:

pub fn deposit_reserve_asset( self, assets: impl Into<MultiAssetFilter>, dest: impl Into<MultiLocation>, xcm: impl Into<Xcm<()>>, ) -> Self

Remove the asset(s) (assets) from the Holding Register and place equivalent assets under the ownership of dest within this consensus system (i.e. deposit them into its sovereign account).

Send an onward XCM message to dest of ReserveAssetDeposited with the given effects.

• assets: The asset(s) to remove from holding.
• dest: The location whose sovereign account will own the assets and thus the effective beneficiary for the assets and the notification target for the reserve asset deposit message.
• xcm: The orders that should follow the ReserveAssetDeposited instruction which is sent onwards to dest.

Kind: Command

Errors:

pub fn exchange_asset( self, give: impl Into<MultiAssetFilter>, want: impl Into<MultiAssets>, maximal: impl Into<bool>, ) -> Self

Remove the asset(s) (want) from the Holding Register and replace them with alternative assets.

The minimum amount of assets to be received into the Holding Register for the order not to fail may be stated.

• give: The maximum amount of assets to remove from holding.
• want: The minimum amount of assets which give should be exchanged for.
• maximal: If true, then prefer to give as much as possible up to the limit of give and receive accordingly more. If false, then prefer to give as little as possible in order to receive as little as possible while receiving at least want.

Kind: Command

Errors:

pub fn initiate_reserve_withdraw( self, assets: impl Into<MultiAssetFilter>, reserve: impl Into<MultiLocation>, xcm: impl Into<Xcm<()>>, ) -> Self

Remove the asset(s) (assets) from holding and send a WithdrawAsset XCM message to a reserve location.

• assets: The asset(s) to remove from holding.
• reserve: A valid location that acts as a reserve for all asset(s) in assets. The sovereign account of this consensus system on the reserve location will have appropriate assets withdrawn and effects will be executed on them. There will typically be only one valid location on any given asset/chain combination.
• xcm: The instructions to execute on the assets once withdrawn on the reserve location.

Kind: Command

Errors:

pub fn initiate_teleport( self, assets: impl Into<MultiAssetFilter>, dest: impl Into<MultiLocation>, xcm: impl Into<Xcm<()>>, ) -> Self

Remove the asset(s) (assets) from holding and send a ReceiveTeleportedAsset XCM message to a dest location.

• assets: The asset(s) to remove from holding.
• dest: A valid location that respects teleports coming from this location.
• xcm: The instructions to execute on the assets once arrived on the destination location.

NOTE: The dest location MUST respect this origin as a valid teleportation origin for all assets. If it does not, then the assets may be lost.

Kind: Command

Errors:

pub fn report_holding( self, response_info: impl Into<QueryResponseInfo>, assets: impl Into<MultiAssetFilter>, ) -> Self

Report to a given destination the contents of the Holding Register.

A QueryResponse message of type Assets is sent to the described destination.

• response_info: Information for making the response.
• assets: A filter for the assets that should be reported back. The assets reported back will be, asset-wise, the lesser of this value and the holding register. No wildcards will be used when reporting assets back.

Kind: Command

Errors:

pub fn buy_execution( self, fees: impl Into<MultiAsset>, weight_limit: impl Into<WeightLimit>, ) -> Self

Pay for the execution of some XCM xcm and orders with up to weight picoseconds of execution time, paying for this with up to fees from the Holding Register.

• fees: The asset(s) to remove from the Holding Register to pay for fees.
• weight_limit: The maximum amount of weight to purchase; this must be at least the expected maximum weight of the total XCM to be executed for the AllowTopLevelPaidExecutionFrom barrier to allow the XCM be executed.

Kind: Command

Errors:

pub fn refund_surplus(self) -> Self

Refund any surplus weight previously bought with BuyExecution.

Kind: Command

Errors: None.

pub fn set_error_handler(self, arg0: impl Into<Xcm<Call>>) -> Self

Set the Error Handler Register. This is code that should be called in the case of an error happening.

An error occurring within execution of this code will NOT result in the error register being set, nor will an error handler be called due to it. The error handler and appendix may each still be set.

The apparent weight of this instruction is inclusive of the inner Xcm; the executing weight however includes only the difference between the previous handler and the new handler, which can reasonably be negative, which would result in a surplus.

Kind: Command

Errors: None.

pub fn set_appendix(self, arg0: impl Into<Xcm<Call>>) -> Self

Set the Appendix Register. This is code that should be called after code execution (including the error handler if any) is finished. This will be called regardless of whether an error occurred.

Any error occurring due to execution of this code will result in the error register being set, and the error handler (if set) firing.

The apparent weight of this instruction is inclusive of the inner Xcm; the executing weight however includes only the difference between the previous appendix and the new appendix, which can reasonably be negative, which would result in a surplus.

Kind: Command

Errors: None.

pub fn clear_error(self) -> Self

Clear the Error Register.

Kind: Command

Errors: None.

pub fn claim_asset( self, assets: impl Into<MultiAssets>, ticket: impl Into<MultiLocation>, ) -> Self

Create some assets which are being held on behalf of the origin.

• assets: The assets which are to be claimed. This must match exactly with the assets claimable by the origin of the ticket.
• ticket: The ticket of the asset; this is an abstract identifier to help locate the asset.

Kind: Command

Errors:

pub fn trap(self, arg0: impl Into<u64>) -> Self

Always throws an error of type Trap.

Kind: Command

Errors:

• Trap: All circumstances, whose inner value is the same as this item’s inner value.

pub fn subscribe_version( self, query_id: impl Into<QueryId>, max_response_weight: impl Into<Weight>, ) -> Self

Ask the destination system to respond with the most recent version of XCM that they support in a QueryResponse instruction. Any changes to this should also elicit similar responses when they happen.

• query_id: An identifier that will be replicated into the returned XCM message.
• max_response_weight: The maximum amount of weight that the QueryResponse item which is sent as a reply may take to execute. NOTE: If this is unexpectedly large then the response may not execute at all.

Kind: Command

Errors: Fallible

pub fn unsubscribe_version(self) -> Self

Cancel the effect of a previous SubscribeVersion instruction.

Kind: Command

Errors: Fallible

pub fn burn_asset(self, arg0: impl Into<MultiAssets>) -> Self

Reduce Holding by up to the given assets.

Holding is reduced by as much as possible up to the assets in the parameter. It is not an error if the Holding does not contain the assets (to make this an error, use ExpectAsset prior).

Kind: Command

Errors: Infallible

pub fn expect_asset(self, arg0: impl Into<MultiAssets>) -> Self

Throw an error if Holding does not contain at least the given assets.

Kind: Command

Errors:

• ExpectationFalse: If Holding Register does not contain the assets in the parameter.

pub fn expect_origin(self, arg0: impl Into<Option<MultiLocation>>) -> Self

Ensure that the Origin Register equals some given value and throw an error if not.

Kind: Command

Errors:

• ExpectationFalse: If Origin Register is not equal to the parameter.

pub fn expect_error(self, arg0: impl Into<Option<(u32, Error)>>) -> Self

Ensure that the Error Register equals some given value and throw an error if not.

Kind: Command

Errors:

• ExpectationFalse: If the value of the Error Register is not equal to the parameter.

pub fn expect_transact_status(self, arg0: impl Into<MaybeErrorCode>) -> Self

Ensure that the Transact Status Register equals some given value and throw an error if not.

Kind: Command

Errors:

• ExpectationFalse: If the value of the Transact Status Register is not equal to the parameter.

pub fn query_pallet( self, module_name: impl Into<Vec<u8>>, response_info: impl Into<QueryResponseInfo>, ) -> Self

Query the existence of a particular pallet type.

• module_name: The module name of the pallet to query.
• response_info: Information for making the response.

Sends a QueryResponse to Origin whose data field PalletsInfo containing the information of all pallets on the local chain whose name is equal to name. This is empty in the case that the local chain is not based on Substrate Frame.

Safety: No concerns.

Kind: Command

Errors: Fallible.

pub fn expect_pallet( self, index: impl Into<u32>, name: impl Into<Vec<u8>>, module_name: impl Into<Vec<u8>>, crate_major: impl Into<u32>, min_crate_minor: impl Into<u32>, ) -> Self

Ensure that a particular pallet with a particular version exists.

• index: Compact: The index which identifies the pallet. An error if no pallet exists at this index.
• name: Vec<u8>: Name which must be equal to the name of the pallet.
• module_name: Vec<u8>: Module name which must be equal to the name of the module in which the pallet exists.
• crate_major: Compact: Version number which must be equal to the major version of the crate which implements the pallet.
• min_crate_minor: Compact: Version number which must be at most the minor version of the crate which implements the pallet.

Safety: No concerns.

Kind: Command

Errors:

• ExpectationFalse: In case any of the expectations are broken.

pub fn report_transact_status(self, arg0: impl Into<QueryResponseInfo>) -> Self

Send a QueryResponse message containing the value of the Transact Status Register to some destination.

• query_response_info: The information needed for constructing and sending the QueryResponse message.

Safety: No concerns.

Kind: Command

Errors: Fallible.

pub fn clear_transact_status(self) -> Self

Set the Transact Status Register to its default, cleared, value.

Safety: No concerns.

Kind: Command

Errors: Infallible.

pub fn universal_origin(self, arg0: impl Into<Junction>) -> Self

Set the Origin Register to be some child of the Universal Ancestor.

Safety: Should only be usable if the Origin is trusted to represent the Universal Ancestor child in general. In general, no Origin should be able to represent the Universal Ancestor child which is the root of the local consensus system since it would by extension allow it to act as any location within the local consensus.

The Junction parameter should generally be a GlobalConsensus variant since it is only these which are children of the Universal Ancestor.

Kind: Command

Errors: Fallible.

pub fn export_message( self, network: impl Into<NetworkId>, destination: impl Into<InteriorMultiLocation>, xcm: impl Into<Xcm<()>>, ) -> Self

Send a message on to Non-Local Consensus system.

This will tend to utilize some extra-consensus mechanism, the obvious one being a bridge. A fee may be charged; this may be determined based on the contents of xcm. It will be taken from the Holding register.

• network: The remote consensus system to which the message should be exported.
• destination: The location relative to the remote consensus system to which the message should be sent on arrival.
• xcm: The message to be exported.

As an example, to export a message for execution on Asset Hub (parachain #1000 in the Kusama network), you would call with network: NetworkId::Kusama and destination: X1(Parachain(1000)). Alternatively, to export a message for execution on Polkadot, you would call with network: NetworkId:: Polkadot and destination: Here.

Kind: Command

Errors: Fallible.

pub fn lock_asset( self, asset: impl Into<MultiAsset>, unlocker: impl Into<MultiLocation>, ) -> Self

Lock the locally held asset and prevent further transfer or withdrawal.

This restriction may be removed by the UnlockAsset instruction being called with an Origin of unlocker and a target equal to the current Origin.

If the locking is successful, then a NoteUnlockable instruction is sent to unlocker.

• asset: The asset(s) which should be locked.
• unlocker: The value which the Origin must be for a corresponding UnlockAsset instruction to work.

Kind: Command.

Errors:

pub fn unlock_asset( self, asset: impl Into<MultiAsset>, target: impl Into<MultiLocation>, ) -> Self

Remove the lock over asset on this chain and (if nothing else is preventing it) allow the asset to be transferred.

• asset: The asset to be unlocked.
• target: The owner of the asset on the local chain.

Safety: No concerns.

Kind: Command.

Errors:

pub fn note_unlockable( self, asset: impl Into<MultiAsset>, owner: impl Into<MultiLocation>, ) -> Self

Asset (asset) has been locked on the origin system and may not be transferred. It may only be unlocked with the receipt of the UnlockAsset instruction from this chain.

• asset: The asset(s) which are now unlockable from this origin.
• owner: The owner of the asset on the chain in which it was locked. This may be a location specific to the origin network.

Safety: origin must be trusted to have locked the corresponding asset prior as a consequence of sending this message.

Kind: Trusted Indication.

Errors:

pub fn request_unlock( self, asset: impl Into<MultiAsset>, locker: impl Into<MultiLocation>, ) -> Self

Send an UnlockAsset instruction to the locker for the given asset.

This may fail if the local system is making use of the fact that the asset is locked or, of course, if there is no record that the asset actually is locked.

• asset: The asset(s) to be unlocked.
• locker: The location from which a previous NoteUnlockable was sent and to which an UnlockAsset should be sent.

Kind: Command.

Errors:

pub fn set_fees_mode(self, jit_withdraw: impl Into<bool>) -> Self

Sets the Fees Mode Register.

• jit_withdraw: The fees mode item; if set to true then fees for any instructions are withdrawn as needed using the same mechanism as WithdrawAssets.

Kind: Command.

Errors:

pub fn set_topic(self, arg0: impl Into<[u8; 32]>) -> Self

Set the Topic Register.

The 32-byte array identifier in the parameter is not guaranteed to be unique; if such a property is desired, it is up to the code author to enforce uniqueness.

Safety: No concerns.

Kind: Command

Errors:

pub fn clear_topic(self) -> Self

Clear the Topic Register.

Kind: Command

Errors: None.

pub fn alias_origin(self, arg0: impl Into<MultiLocation>) -> Self

Alter the current Origin to another given origin.

Kind: Command

Errors: If the existing state would not allow such a change.

pub fn unpaid_execution( self, weight_limit: impl Into<WeightLimit>, check_origin: impl Into<Option<MultiLocation>>, ) -> Self

A directive to indicate that the origin expects free execution of the message.

At execution time, this instruction just does a check on the Origin register. However, at the barrier stage messages starting with this instruction can be disregarded if the origin is not acceptable for free execution or the weight_limit is Limited and insufficient.

Kind: Indication

Errors: If the given origin is Some and not equal to the current Origin register.

pub fn build(self) -> Xcm<Call>