Struct polkadot_runtime_common::crowdloan::pallet::Pallet

impl<T: Config> Pallet<T>

pub fn create( origin: OriginFor<T>, index: ParaId, cap: <<<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::Currency as Currency<<T as Config>::AccountId>>::Balance, first_period: <<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::LeasePeriod, last_period: <<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::LeasePeriod, end: BlockNumberFor<T>, verifier: Option<MultiSigner> ) -> DispatchResult

Create a new crowdloaning campaign for a parachain slot with the given lease period range.

This applies a lock to your parachain configuration, ensuring that it cannot be changed by the parachain manager.

pub fn contribute( origin: OriginFor<T>, index: ParaId, value: <<<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::Currency as Currency<<T as Config>::AccountId>>::Balance, signature: Option<MultiSignature> ) -> DispatchResult

Contribute to a crowd sale. This will transfer some balance over to fund a parachain slot. It will be withdrawable when the crowdloan has ended and the funds are unused.

pub fn withdraw( origin: OriginFor<T>, who: T::AccountId, index: ParaId ) -> DispatchResult

Withdraw full balance of a specific contributor.

Origin must be signed, but can come from anyone.

The fund must be either in, or ready for, retirement. For a fund to be in retirement, then the retirement flag must be set. For a fund to be ready for retirement, then:

it must not already be in retirement;
the amount of raised funds must be bigger than the free balance of the account;
and either:
- the block number must be at least end; or
- the current lease period must be greater than the fund’s last_period.

In this case, the fund’s retirement flag is set and its end is reset to the current block number.

who: The account whose contribution should be withdrawn.
index: The parachain to whose crowdloan the contribution was made.

pub fn refund(origin: OriginFor<T>, index: ParaId) -> DispatchResultWithPostInfo

Automatically refund contributors of an ended crowdloan. Due to weight restrictions, this function may need to be called multiple times to fully refund all users. We will refund RemoveKeysLimit users at a time.

Origin must be signed, but can come from anyone.

pub fn dissolve(origin: OriginFor<T>, index: ParaId) -> DispatchResult

Remove a fund after the retirement period has ended and all funds have been returned.

pub fn edit( origin: OriginFor<T>, index: ParaId, cap: <<<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::Currency as Currency<<T as Config>::AccountId>>::Balance, first_period: <<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::LeasePeriod, last_period: <<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::LeasePeriod, end: BlockNumberFor<T>, verifier: Option<MultiSigner> ) -> DispatchResult

Edit the configuration for an in-progress crowdloan.

Can only be called by Root origin.

pub fn add_memo( origin: OriginFor<T>, index: ParaId, memo: Vec<u8> ) -> DispatchResult

Add an optional memo to an existing crowdloan contribution.

Origin must be Signed, and the user must have contributed to the crowdloan.

pub fn poke(origin: OriginFor<T>, index: ParaId) -> DispatchResult

Poke the fund into NewRaise

Origin must be Signed, and the fund has non-zero raise.

pub fn contribute_all( origin: OriginFor<T>, index: ParaId, signature: Option<MultiSignature> ) -> DispatchResult

Contribute your entire balance to a crowd sale. This will transfer the entire balance of a user over to fund a parachain slot. It will be withdrawable when the crowdloan has ended and the funds are unused.

impl<T: Config> Pallet<T>

pub fn funds<KArg>( k: KArg ) -> Option<FundInfo<T::AccountId, <<<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::Currency as Currency<<T as Config>::AccountId>>::Balance, BlockNumberFor<T>, <<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::LeasePeriod>>where KArg: EncodeLike<ParaId>,

“ Info on all of the funds.“

impl<T: Config> Pallet<T>

pub fn new_raise() -> Vec<ParaId>

“ The funds that have had additional contributions during the last block. This is used“ “ in order to determine which funds should submit new or updated bids.“

impl<T: Config> Pallet<T>

pub fn endings_count() -> u32

“ The number of auctions that have entered into their ending period so far.“

impl<T: Config> Pallet<T>

pub fn next_fund_index() -> u32

“ Tracker for the next available fund index“

impl<T: Config> Pallet<T>

pub fn fund_account_id(index: u32) -> T::AccountId

The account ID of the fund pot.

This actually does computation. If you need to keep using it, then make sure you cache the value and only call this once.

pub fn id_from_index(index: u32) -> ChildInfo

pub fn contribution_put( index: u32, who: &T::AccountId, balance: &<<<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::Currency as Currency<<T as Config>::AccountId>>::Balance, memo: &[u8] )

pub fn contribution_get( index: u32, who: &T::AccountId ) -> (<<<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::Currency as Currency<<T as Config>::AccountId>>::Balance, Vec<u8>)

pub fn contribution_kill(index: u32, who: &T::AccountId)

pub fn crowdloan_kill(index: u32) -> KillStorageResult

pub fn contribution_iterator( index: u32 ) -> ChildTriePrefixIterator<(T::AccountId, (<<<T as Config>::Auctioneer as Auctioneer<BlockNumberFor<T>>>::Currency as Currency<<T as Config>::AccountId>>::Balance, Vec<u8>))>

Trait Implementations§

fn clone(&self) -> Self

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl<T> Debug for Pallet<T>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl<T: Config> GetStorageVersion for Pallet<T>

type CurrentStorageVersion = StorageVersion

This will be filled out by the pallet macro. Read more

fn current_storage_version() -> Self::CurrentStorageVersion

Returns the current storage version as supported by the pallet.

fn on_chain_storage_version() -> StorageVersion

Returns the on-chain storage version of the pallet as stored in the storage.

fn on_initialize(num: BlockNumberFor<T>) -> Weight

Block initialization hook. This is called at the very beginning of block execution. Read more

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution. Read more

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before [Hooks::on_finalize]). Read more

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by FRAME. Read more

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main wasm runtime. Read more

fn integrity_test()

Check the integrity of this pallet’s configuration. Read more

impl<T: Config> IntegrityTest for Pallet<T>

fn integrity_test()

See [Hooks::integrity_test].

fn offchain_worker(n: BlockNumberFor<T>)

This function is being called after every block import (when fully synced). Read more

fn on_finalize(n: BlockNumberFor<T>)

See [Hooks::on_finalize].

impl<T: Config> OnGenesis for Pallet<T>

fn on_genesis()

Something that should happen at genesis.

fn on_idle(n: BlockNumberFor<T>, remaining_weight: Weight) -> Weight

See [Hooks::on_idle].

fn on_initialize(n: BlockNumberFor<T>) -> Weight

See [Hooks::on_initialize].

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

fn on_runtime_upgrade() -> Weight

See [Hooks::on_runtime_upgrade].

impl<T: Config> OnSwap for Pallet<T>

fn on_swap(one: ParaId, other: ParaId)

Updates any needed state/references to enact a logical swap of two parachains. Identity, code and head_data remain equivalent for all parachains/threads, however other properties such as leases, deposits held and thread/chain nature are swapped.

impl<T: Config> PalletInfoAccess for Pallet<T>

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T: Config> PalletsInfoAccess for Pallet<T>

fn count() -> usize

The number of pallets’ information that this type represents. Read more

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T> PartialEq<Pallet<T>> for Pallet<T>

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T: Config> StorageInfoTrait for Pallet<T>

fn storage_info() -> Vec<StorageInfo>

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T> Eq for Pallet<T>

Auto Trait Implementations§

impl<T> RefUnwindSafe for Pallet<T>where T: RefUnwindSafe,

impl<T> Send for Pallet<T>where T: Send,

impl<T> Sync for Pallet<T>where T: Sync,

impl<T> Unpin for Pallet<T>where T: Unpin,

impl<T> UnwindSafe for Pallet<T>where T: UnwindSafe,

Blanket Implementations§

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CheckedConversion for T

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more

impl<T> Conv for T

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more

impl<T> DynClone for Twhere T: Clone,

fn __clone_box(&self, _: Private) -> *mut ()

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more

impl<T> FmtForward for T

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IsType<T> for T

fn from_ref(t: &T) -> &T

Cast reference.

fn into_ref(&self) -> &T

Cast reference.

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.

fn into_mut(&mut self) -> &mut T

Cast mutable reference.

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

impl<T> Pipe for Twhere T: ?Sized,

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.

impl<T> Pointable for T

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.

type Init = T

The type for initializers.

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more

impl<T> Same<T> for T

type Output = T

Should always be Self

impl<T> SaturatedConversion for T

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more

impl<T> Tap for T

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more

fn tap_borrow(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow, B: ?Sized,

Immutable access to the Borrow of a value. Read more

fn tap_borrow_mut(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut, B: ?Sized,

Mutable access to the BorrowMut of a value. Read more

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.

fn tap_borrow_dbg(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.

fn tap_borrow_mut_dbg(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.

impl<T> ToOwned for Twhere T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T> TryConv for T

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more

impl<T, U> TryFrom for Twhere U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for Twhere U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source§

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

fn unchecked_into(self) -> T

The counterpart to unchecked_from.

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

fn vzip(self) -> V

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

impl<T> JsonSchemaMaybe for T

impl<T> MaybeDebug for Twhere T: Debug,

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,