Struct polkadot_runtime_parachains::initializer::pallet::Pallet
source · pub struct Pallet<T>(_);
Expand description
The Pallet
struct, the main type that implements traits and standalone
functions within the pallet.
Implementations§
source§impl<T: Config> Pallet<T>
impl<T: Config> Pallet<T>
sourcepub fn force_approve(origin: OriginFor<T>, up_to: BlockNumber) -> DispatchResult
pub fn force_approve(origin: OriginFor<T>, up_to: BlockNumber) -> DispatchResult
Issue a signal to the consensus engine to forcibly act as though all parachain blocks in all relay chain blocks up to and including the given number in the current chain are valid and should be finalized.
Trait Implementations§
source§impl<T: Config> GetStorageVersion for Pallet<T>
impl<T: Config> GetStorageVersion for Pallet<T>
§type CurrentStorageVersion = NoStorageVersionSet
type CurrentStorageVersion = NoStorageVersionSet
source§fn current_storage_version() -> Self::CurrentStorageVersion
fn current_storage_version() -> Self::CurrentStorageVersion
Returns the current storage version as supported by the pallet.
source§fn on_chain_storage_version() -> StorageVersion
fn on_chain_storage_version() -> StorageVersion
Returns the on-chain storage version of the pallet as stored in the storage.
source§impl<T: Config> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
impl<T: Config> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
source§fn on_initialize(now: BlockNumberFor<T>) -> Weight
fn on_initialize(now: BlockNumberFor<T>) -> Weight
Block initialization hook. This is called at the very beginning of block execution. Read more
source§fn on_finalize(now: BlockNumberFor<T>)
fn on_finalize(now: BlockNumberFor<T>)
Block finalization hook. This is called at the very end of block execution. Read more
§fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight
fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight
Hook to consume a block’s idle time. This will run when the block is being finalized (before
[
Hooks::on_finalize
]). Read more§fn on_runtime_upgrade() -> Weight
fn on_runtime_upgrade() -> Weight
Hook executed when a code change (aka. a “runtime upgrade”) is detected by FRAME. Read more
§fn offchain_worker(_n: BlockNumber)
fn offchain_worker(_n: BlockNumber)
Implementing this function on a pallet allows you to perform long-running tasks that are
dispatched as separate threads, and entirely independent of the main wasm runtime. Read more
§fn integrity_test()
fn integrity_test()
Check the integrity of this pallet’s configuration. Read more
source§impl<T: Config> IntegrityTest for Pallet<T>
impl<T: Config> IntegrityTest for Pallet<T>
source§fn integrity_test()
fn integrity_test()
See [
Hooks::integrity_test
].source§impl<T: Config> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
impl<T: Config> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
source§fn offchain_worker(n: BlockNumberFor<T>)
fn offchain_worker(n: BlockNumberFor<T>)
This function is being called after every block import (when fully synced). Read more
source§impl<T: Config> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
impl<T: Config> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
source§fn on_finalize(n: BlockNumberFor<T>)
fn on_finalize(n: BlockNumberFor<T>)
See [
Hooks::on_finalize
].source§impl<T: Config> OnGenesis for Pallet<T>
impl<T: Config> OnGenesis for Pallet<T>
source§fn on_genesis()
fn on_genesis()
Something that should happen at genesis.
source§impl<T: Config> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
impl<T: Config> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
source§impl<T: Config> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
impl<T: Config> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>
source§fn on_initialize(n: BlockNumberFor<T>) -> Weight
fn on_initialize(n: BlockNumberFor<T>) -> Weight
See [
Hooks::on_initialize
].source§impl<T: Config> OnRuntimeUpgrade for Pallet<T>
impl<T: Config> OnRuntimeUpgrade for Pallet<T>
source§fn on_runtime_upgrade() -> Weight
fn on_runtime_upgrade() -> Weight
See [
Hooks::on_runtime_upgrade
].source§impl<T: Config + Config> OneSessionHandler<<T as Config>::AccountId> for Pallet<T>
impl<T: Config + Config> OneSessionHandler<<T as Config>::AccountId> for Pallet<T>
source§fn on_genesis_session<'a, I>(validators: I)where
I: Iterator<Item = (&'a T::AccountId, Self::Key)> + 'a,
fn on_genesis_session<'a, I>(validators: I)where I: Iterator<Item = (&'a T::AccountId, Self::Key)> + 'a,
The given validator set will be used for the genesis session.
It is guaranteed that the given validator set will also be used
for the second session, therefore the first call to
on_new_session
should provide the same validator set.source§fn on_new_session<'a, I>(changed: bool, validators: I, queued: I)where
I: Iterator<Item = (&'a T::AccountId, Self::Key)> + 'a,
fn on_new_session<'a, I>(changed: bool, validators: I, queued: I)where I: Iterator<Item = (&'a T::AccountId, Self::Key)> + 'a,
Session set has changed; act appropriately. Note that this can be called
before initialization of your module. Read more
source§fn on_disabled(_i: u32)
fn on_disabled(_i: u32)
A validator got disabled. Act accordingly until a new session begins.
§fn on_before_session_ending()
fn on_before_session_ending()
A notification for end of the session. Read more
source§impl<T: Config> PalletInfoAccess for Pallet<T>
impl<T: Config> PalletInfoAccess for Pallet<T>
source§fn module_name() -> &'static str
fn module_name() -> &'static str
Name of the Rust module containing the pallet.
source§fn crate_version() -> CrateVersion
fn crate_version() -> CrateVersion
Version of the crate containing the pallet.
source§impl<T> PartialEq<Pallet<T>> for Pallet<T>
impl<T> PartialEq<Pallet<T>> for Pallet<T>
source§impl<T: Config> WhitelistedStorageKeys for Pallet<T>
impl<T: Config> WhitelistedStorageKeys for Pallet<T>
source§fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>
fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>
Returns a
Vec<TrackedStorageKey>
indicating the storage keys that
should be whitelisted during benchmarking. This means that those keys
will be excluded from the benchmarking performance calculation.impl<T> Eq for Pallet<T>
Auto Trait Implementations§
impl<T> RefUnwindSafe for Pallet<T>where T: RefUnwindSafe,
impl<T> Send for Pallet<T>where T: Send,
impl<T> Sync for Pallet<T>where T: Sync,
impl<T> Unpin for Pallet<T>where T: Unpin,
impl<T> UnwindSafe for Pallet<T>where T: UnwindSafe,
Blanket Implementations§
§impl<T> CheckedConversion for T
impl<T> CheckedConversion for T
§fn checked_from<T>(t: T) -> Option<Self>where
Self: TryFrom<T>,
fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,
§fn checked_into<T>(self) -> Option<T>where
Self: TryInto<T>,
fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,
§impl<T> Conv for T
impl<T> Conv for T
source§impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,
source§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to
key
and return true
if they are equal.§impl<Q, K> Equivalent<K> for Qwhere
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,
§fn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Checks if this value is equivalent to the given key. Read more
§impl<T> FmtForward for T
impl<T> FmtForward for T
§fn fmt_binary(self) -> FmtBinary<Self>where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,
Causes
self
to use its Binary
implementation when Debug
-formatted.§fn fmt_display(self) -> FmtDisplay<Self>where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,
Causes
self
to use its Display
implementation when
Debug
-formatted.§fn fmt_lower_exp(self) -> FmtLowerExp<Self>where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,
Causes
self
to use its LowerExp
implementation when
Debug
-formatted.§fn fmt_lower_hex(self) -> FmtLowerHex<Self>where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,
Causes
self
to use its LowerHex
implementation when
Debug
-formatted.§fn fmt_octal(self) -> FmtOctal<Self>where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,
Causes
self
to use its Octal
implementation when Debug
-formatted.§fn fmt_pointer(self) -> FmtPointer<Self>where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,
Causes
self
to use its Pointer
implementation when
Debug
-formatted.§fn fmt_upper_exp(self) -> FmtUpperExp<Self>where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,
Causes
self
to use its UpperExp
implementation when
Debug
-formatted.§fn fmt_upper_hex(self) -> FmtUpperHex<Self>where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,
Causes
self
to use its UpperHex
implementation when
Debug
-formatted.§fn fmt_list(self) -> FmtList<Self>where
&'a Self: for<'a> IntoIterator,
fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,
Formats each item in a sequence. Read more
source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
§impl<T> IsType<T> for T
impl<T> IsType<T> for T
§impl<T> Pipe for Twhere
T: ?Sized,
impl<T> Pipe for Twhere T: ?Sized,
§fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere
Self: Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,
Pipes by value. This is generally the method you want to use. Read more
§fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,
Borrows
self
and passes that borrow into the pipe function. Read more§fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,
Mutably borrows
self
and passes that borrow into the pipe function. Read more§fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> Rwhere
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,
§fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,
Borrows
self
, then passes self.as_ref()
into the pipe function.§fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,
Mutably borrows
self
, then passes self.as_mut()
into the pipe
function.§impl<T> Pointable for T
impl<T> Pointable for T
§impl<T> SaturatedConversion for T
impl<T> SaturatedConversion for T
§fn saturated_from<T>(t: T) -> Selfwhere
Self: UniqueSaturatedFrom<T>,
fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,
§fn saturated_into<T>(self) -> Twhere
Self: UniqueSaturatedInto<T>,
fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,
Consume self to return an equivalent value of
T
. Read more§impl<T> Tap for T
impl<T> Tap for T
§fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
Immutable access to the
Borrow<B>
of a value. Read more§fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
Mutable access to the
BorrowMut<B>
of a value. Read more§fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
Immutable access to the
AsRef<R>
view of a value. Read more§fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
Mutable access to the
AsMut<R>
view of a value. Read more§fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,
Immutable access to the
Deref::Target
of a value. Read more§fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,
Mutable access to the
Deref::Target
of a value. Read more§fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls
.tap()
only in debug builds, and is erased in release builds.§fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls
.tap_mut()
only in debug builds, and is erased in release
builds.§fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,
Calls
.tap_borrow()
only in debug builds, and is erased in release
builds.§fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,
Calls
.tap_borrow_mut()
only in debug builds, and is erased in release
builds.§fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,
Calls
.tap_ref()
only in debug builds, and is erased in release
builds.§fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,
Calls
.tap_ref_mut()
only in debug builds, and is erased in release
builds.§impl<T> TryConv for T
impl<T> TryConv for T
§impl<S, T> UncheckedInto<T> for Swhere
T: UncheckedFrom<S>,
impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,
§fn unchecked_into(self) -> T
fn unchecked_into(self) -> T
The counterpart to
unchecked_from
.§impl<T, S> UniqueSaturatedInto<T> for Swhere
T: Bounded,
S: TryInto<T>,
impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,
§fn unique_saturated_into(self) -> T
fn unique_saturated_into(self) -> T
Consume self to return an equivalent value of
T
.