pub enum Instruction<Call> {
Show 48 variants WithdrawAsset(MultiAssets), ReserveAssetDeposited(MultiAssets), ReceiveTeleportedAsset(MultiAssets), QueryResponse { query_id: u64, response: Response, max_weight: Weight, querier: Option<MultiLocation>, }, TransferAsset { assets: MultiAssets, beneficiary: MultiLocation, }, TransferReserveAsset { assets: MultiAssets, dest: MultiLocation, xcm: Xcm<()>, }, Transact { origin_kind: OriginKind, require_weight_at_most: Weight, call: DoubleEncoded<Call>, }, HrmpNewChannelOpenRequest { sender: u32, max_message_size: u32, max_capacity: u32, }, HrmpChannelAccepted { recipient: u32, }, HrmpChannelClosing { initiator: u32, sender: u32, recipient: u32, }, ClearOrigin, DescendOrigin(Junctions), ReportError(QueryResponseInfo), DepositAsset { assets: MultiAssetFilter, beneficiary: MultiLocation, }, DepositReserveAsset { assets: MultiAssetFilter, dest: MultiLocation, xcm: Xcm<()>, }, ExchangeAsset { give: MultiAssetFilter, want: MultiAssets, maximal: bool, }, InitiateReserveWithdraw { assets: MultiAssetFilter, reserve: MultiLocation, xcm: Xcm<()>, }, InitiateTeleport { assets: MultiAssetFilter, dest: MultiLocation, xcm: Xcm<()>, }, ReportHolding { response_info: QueryResponseInfo, assets: MultiAssetFilter, }, BuyExecution { fees: MultiAsset, weight_limit: WeightLimit, }, RefundSurplus, SetErrorHandler(Xcm<Call>), SetAppendix(Xcm<Call>), ClearError, ClaimAsset { assets: MultiAssets, ticket: MultiLocation, }, Trap(u64), SubscribeVersion { query_id: u64, max_response_weight: Weight, }, UnsubscribeVersion, BurnAsset(MultiAssets), ExpectAsset(MultiAssets), ExpectOrigin(Option<MultiLocation>), ExpectError(Option<(u32, Error)>), ExpectTransactStatus(MaybeErrorCode), QueryPallet { module_name: Vec<u8, Global>, response_info: QueryResponseInfo, }, ExpectPallet { index: u32, name: Vec<u8, Global>, module_name: Vec<u8, Global>, crate_major: u32, min_crate_minor: u32, }, ReportTransactStatus(QueryResponseInfo), ClearTransactStatus, UniversalOrigin(Junction), ExportMessage { network: NetworkId, destination: Junctions, xcm: Xcm<()>, }, LockAsset { asset: MultiAsset, unlocker: MultiLocation, }, UnlockAsset { asset: MultiAsset, target: MultiLocation, }, NoteUnlockable { asset: MultiAsset, owner: MultiLocation, }, RequestUnlock { asset: MultiAsset, locker: MultiLocation, }, SetFeesMode { jit_withdraw: bool, }, SetTopic([u8; 32]), ClearTopic, AliasOrigin(MultiLocation), UnpaidExecution { weight_limit: WeightLimit, check_origin: Option<MultiLocation>, },
}
Expand description

Cross-Consensus Message: A message from one consensus system to another.

Consensus systems that may send and receive messages include blockchains and smart contracts.

All messages are delivered from a known origin, expressed as a MultiLocation.

This is the inner XCM format and is version-sensitive. Messages are typically passed using the outer XCM format, known as VersionedXcm.

Variants§

§

WithdrawAsset(MultiAssets)

Withdraw asset(s) (assets) from the ownership of origin and place them into the Holding Register.

  • assets: The asset(s) to be withdrawn into holding.

Kind: Command.

Errors:

§

ReserveAssetDeposited(MultiAssets)

Asset(s) (assets) have been received into the ownership of this system on the origin system and equivalent derivatives should be placed into the Holding Register.

  • assets: The asset(s) that are minted into holding.

Safety: origin must be trusted to have received and be storing assets such that they may later be withdrawn should this system send a corresponding message.

Kind: Trusted Indication.

Errors:

§

ReceiveTeleportedAsset(MultiAssets)

Asset(s) (assets) have been destroyed on the origin system and equivalent assets should be created and placed into the Holding Register.

  • assets: The asset(s) that are minted into the Holding Register.

Safety: origin must be trusted to have irrevocably destroyed the corresponding assets prior as a consequence of sending this message.

Kind: Trusted Indication.

Errors:

§

QueryResponse

Fields

§query_id: u64
§response: Response
§max_weight: Weight

Respond with information that the local system is expecting.

  • query_id: The identifier of the query that resulted in this message being sent.
  • response: The message content.
  • max_weight: The maximum weight that handling this response should take.
  • querier: The location responsible for the initiation of the response, if there is one. In general this will tend to be the same location as the receiver of this message. NOTE: As usual, this is interpreted from the perspective of the receiving consensus system.

Safety: Since this is information only, there are no immediate concerns. However, it should be remembered that even if the Origin behaves reasonably, it can always be asked to make a response to a third-party chain who may or may not be expecting the response. Therefore the querier should be checked to match the expected value.

Kind: Information.

Errors:

§

TransferAsset

Fields

§beneficiary: MultiLocation

Withdraw asset(s) (assets) from the ownership of origin and place equivalent assets under the ownership of beneficiary.

  • assets: The asset(s) to be withdrawn.
  • beneficiary: The new owner for the assets.

Safety: No concerns.

Kind: Command.

Errors:

§

TransferReserveAsset

Fields

§xcm: Xcm<()>

Withdraw asset(s) (assets) from the ownership of origin and place equivalent assets under the ownership of dest within this consensus system (i.e. its sovereign account).

Send an onward XCM message to dest of ReserveAssetDeposited with the given xcm.

  • assets: The asset(s) to be withdrawn.
  • dest: The location whose sovereign account will own the assets and thus the effective beneficiary for the assets and the notification target for the reserve asset deposit message.
  • xcm: The instructions that should follow the ReserveAssetDeposited instruction, which is sent onwards to dest.

Safety: No concerns.

Kind: Command.

Errors:

§

Transact

Fields

§origin_kind: OriginKind
§require_weight_at_most: Weight
§call: DoubleEncoded<Call>

Apply the encoded transaction call, whose dispatch-origin should be origin as expressed by the kind of origin origin_kind.

The Transact Status Register is set according to the result of dispatching the call.

  • origin_kind: The means of expressing the message origin as a dispatch origin.
  • require_weight_at_most: The weight of call; this should be at least the chain’s calculated weight and will be used in the weight determination arithmetic.
  • call: The encoded transaction to be applied.

Safety: No concerns.

Kind: Command.

Errors:

§

HrmpNewChannelOpenRequest

Fields

§sender: u32
§max_message_size: u32
§max_capacity: u32

A message to notify about a new incoming HRMP channel. This message is meant to be sent by the relay-chain to a para.

  • sender: The sender in the to-be opened channel. Also, the initiator of the channel opening.
  • max_message_size: The maximum size of a message proposed by the sender.
  • max_capacity: The maximum number of messages that can be queued in the channel.

Safety: The message should originate directly from the relay-chain.

Kind: System Notification

§

HrmpChannelAccepted

Fields

§recipient: u32

A message to notify about that a previously sent open channel request has been accepted by the recipient. That means that the channel will be opened during the next relay-chain session change. This message is meant to be sent by the relay-chain to a para.

Safety: The message should originate directly from the relay-chain.

Kind: System Notification

Errors:

§

HrmpChannelClosing

Fields

§initiator: u32
§sender: u32
§recipient: u32

A message to notify that the other party in an open channel decided to close it. In particular, initiator is going to close the channel opened from sender to the recipient. The close will be enacted at the next relay-chain session change. This message is meant to be sent by the relay-chain to a para.

Safety: The message should originate directly from the relay-chain.

Kind: System Notification

Errors:

§

ClearOrigin

Clear the origin.

This may be used by the XCM author to ensure that later instructions cannot command the authority of the origin (e.g. if they are being relayed from an untrusted source, as often the case with ReserveAssetDeposited).

Safety: No concerns.

Kind: Command.

Errors:

§

DescendOrigin(Junctions)

Mutate the origin to some interior location.

Kind: Command

Errors:

§

ReportError(QueryResponseInfo)

Immediately report the contents of the Error Register to the given destination via XCM.

A QueryResponse message of type ExecutionOutcome is sent to the described destination.

  • response_info: Information for making the response.

Kind: Command

Errors:

§

DepositAsset

Fields

§beneficiary: MultiLocation

Remove the asset(s) (assets) from the Holding Register and place equivalent assets under the ownership of beneficiary within this consensus system.

  • assets: The asset(s) to remove from holding.
  • beneficiary: The new owner for the assets.

Kind: Command

Errors:

§

DepositReserveAsset

Fields

§xcm: Xcm<()>

Remove the asset(s) (assets) from the Holding Register and place equivalent assets under the ownership of dest within this consensus system (i.e. deposit them into its sovereign account).

Send an onward XCM message to dest of ReserveAssetDeposited with the given effects.

  • assets: The asset(s) to remove from holding.
  • dest: The location whose sovereign account will own the assets and thus the effective beneficiary for the assets and the notification target for the reserve asset deposit message.
  • xcm: The orders that should follow the ReserveAssetDeposited instruction which is sent onwards to dest.

Kind: Command

Errors:

§

ExchangeAsset

Fields

§maximal: bool

Remove the asset(s) (want) from the Holding Register and replace them with alternative assets.

The minimum amount of assets to be received into the Holding Register for the order not to fail may be stated.

  • give: The maximum amount of assets to remove from holding.
  • want: The minimum amount of assets which give should be exchanged for.
  • maximal: If true, then prefer to give as much as possible up to the limit of give and receive accordingly more. If false, then prefer to give as little as possible in order to receive as little as possible while receiving at least want.

Kind: Command

Errors:

§

InitiateReserveWithdraw

Fields

§xcm: Xcm<()>

Remove the asset(s) (assets) from holding and send a WithdrawAsset XCM message to a reserve location.

  • assets: The asset(s) to remove from holding.
  • reserve: A valid location that acts as a reserve for all asset(s) in assets. The sovereign account of this consensus system on the reserve location will have appropriate assets withdrawn and effects will be executed on them. There will typically be only one valid location on any given asset/chain combination.
  • xcm: The instructions to execute on the assets once withdrawn on the reserve location.

Kind: Command

Errors:

§

InitiateTeleport

Fields

§xcm: Xcm<()>

Remove the asset(s) (assets) from holding and send a ReceiveTeleportedAsset XCM message to a dest location.

  • assets: The asset(s) to remove from holding.
  • dest: A valid location that respects teleports coming from this location.
  • xcm: The instructions to execute on the assets once arrived on the destination location.

NOTE: The dest location MUST respect this origin as a valid teleportation origin for all assets. If it does not, then the assets may be lost.

Kind: Command

Errors:

§

ReportHolding

Fields

§response_info: QueryResponseInfo

Report to a given destination the contents of the Holding Register.

A QueryResponse message of type Assets is sent to the described destination.

  • response_info: Information for making the response.
  • assets: A filter for the assets that should be reported back. The assets reported back will be, asset-wise, the lesser of this value and the holding register. No wildcards will be used when reporting assets back.

Kind: Command

Errors:

§

BuyExecution

Fields

§weight_limit: WeightLimit

Pay for the execution of some XCM xcm and orders with up to weight picoseconds of execution time, paying for this with up to fees from the Holding Register.

  • fees: The asset(s) to remove from the Holding Register to pay for fees.
  • weight_limit: The maximum amount of weight to purchase; this must be at least the expected maximum weight of the total XCM to be executed for the AllowTopLevelPaidExecutionFrom barrier to allow the XCM be executed.

Kind: Command

Errors:

§

RefundSurplus

Refund any surplus weight previously bought with BuyExecution.

Kind: Command

Errors: None.

§

SetErrorHandler(Xcm<Call>)

Set the Error Handler Register. This is code that should be called in the case of an error happening.

An error occurring within execution of this code will NOT result in the error register being set, nor will an error handler be called due to it. The error handler and appendix may each still be set.

The apparent weight of this instruction is inclusive of the inner Xcm; the executing weight however includes only the difference between the previous handler and the new handler, which can reasonably be negative, which would result in a surplus.

Kind: Command

Errors: None.

§

SetAppendix(Xcm<Call>)

Set the Appendix Register. This is code that should be called after code execution (including the error handler if any) is finished. This will be called regardless of whether an error occurred.

Any error occurring due to execution of this code will result in the error register being set, and the error handler (if set) firing.

The apparent weight of this instruction is inclusive of the inner Xcm; the executing weight however includes only the difference between the previous appendix and the new appendix, which can reasonably be negative, which would result in a surplus.

Kind: Command

Errors: None.

§

ClearError

Clear the Error Register.

Kind: Command

Errors: None.

§

ClaimAsset

Fields

Create some assets which are being held on behalf of the origin.

  • assets: The assets which are to be claimed. This must match exactly with the assets claimable by the origin of the ticket.
  • ticket: The ticket of the asset; this is an abstract identifier to help locate the asset.

Kind: Command

Errors:

§

Trap(u64)

Always throws an error of type Trap.

Kind: Command

Errors:

  • Trap: All circumstances, whose inner value is the same as this item’s inner value.
§

SubscribeVersion

Fields

§query_id: u64
§max_response_weight: Weight

Ask the destination system to respond with the most recent version of XCM that they support in a QueryResponse instruction. Any changes to this should also elicit similar responses when they happen.

  • query_id: An identifier that will be replicated into the returned XCM message.
  • max_response_weight: The maximum amount of weight that the QueryResponse item which is sent as a reply may take to execute. NOTE: If this is unexpectedly large then the response may not execute at all.

Kind: Command

Errors: Fallible

§

UnsubscribeVersion

Cancel the effect of a previous SubscribeVersion instruction.

Kind: Command

Errors: Fallible

§

BurnAsset(MultiAssets)

Reduce Holding by up to the given assets.

Holding is reduced by as much as possible up to the assets in the parameter. It is not an error if the Holding does not contain the assets (to make this an error, use ExpectAsset prior).

Kind: Command

Errors: Infallible

§

ExpectAsset(MultiAssets)

Throw an error if Holding does not contain at least the given assets.

Kind: Command

Errors:

  • ExpectationFalse: If Holding Register does not contain the assets in the parameter.
§

ExpectOrigin(Option<MultiLocation>)

Ensure that the Origin Register equals some given value and throw an error if not.

Kind: Command

Errors:

  • ExpectationFalse: If Origin Register is not equal to the parameter.
§

ExpectError(Option<(u32, Error)>)

Ensure that the Error Register equals some given value and throw an error if not.

Kind: Command

Errors:

  • ExpectationFalse: If the value of the Error Register is not equal to the parameter.
§

ExpectTransactStatus(MaybeErrorCode)

Ensure that the Transact Status Register equals some given value and throw an error if not.

Kind: Command

Errors:

  • ExpectationFalse: If the value of the Transact Status Register is not equal to the parameter.
§

QueryPallet

Fields

§module_name: Vec<u8, Global>
§response_info: QueryResponseInfo

Query the existence of a particular pallet type.

  • module_name: The module name of the pallet to query.
  • response_info: Information for making the response.

Sends a QueryResponse to Origin whose data field PalletsInfo containing the information of all pallets on the local chain whose name is equal to name. This is empty in the case that the local chain is not based on Substrate Frame.

Safety: No concerns.

Kind: Command

Errors: Fallible.

§

ExpectPallet

Fields

§index: u32
§name: Vec<u8, Global>
§module_name: Vec<u8, Global>
§crate_major: u32
§min_crate_minor: u32

Ensure that a particular pallet with a particular version exists.

  • index: Compact: The index which identifies the pallet. An error if no pallet exists at this index.
  • name: Vec<u8>: Name which must be equal to the name of the pallet.
  • module_name: Vec<u8>: Module name which must be equal to the name of the module in which the pallet exists.
  • crate_major: Compact: Version number which must be equal to the major version of the crate which implements the pallet.
  • min_crate_minor: Compact: Version number which must be at most the minor version of the crate which implements the pallet.

Safety: No concerns.

Kind: Command

Errors:

  • ExpectationFalse: In case any of the expectations are broken.
§

ReportTransactStatus(QueryResponseInfo)

Send a QueryResponse message containing the value of the Transact Status Register to some destination.

  • query_response_info: The information needed for constructing and sending the QueryResponse message.

Safety: No concerns.

Kind: Command

Errors: Fallible.

§

ClearTransactStatus

Set the Transact Status Register to its default, cleared, value.

Safety: No concerns.

Kind: Command

Errors: Infallible.

§

UniversalOrigin(Junction)

Set the Origin Register to be some child of the Universal Ancestor.

Safety: Should only be usable if the Origin is trusted to represent the Universal Ancestor child in general. In general, no Origin should be able to represent the Universal Ancestor child which is the root of the local consensus system since it would by extension allow it to act as any location within the local consensus.

The Junction parameter should generally be a GlobalConsensus variant since it is only these which are children of the Universal Ancestor.

Kind: Command

Errors: Fallible.

§

ExportMessage

Fields

§network: NetworkId
§destination: Junctions
§xcm: Xcm<()>

Send a message on to Non-Local Consensus system.

This will tend to utilize some extra-consensus mechanism, the obvious one being a bridge. A fee may be charged; this may be determined based on the contents of xcm. It will be taken from the Holding register.

  • network: The remote consensus system to which the message should be exported.
  • destination: The location relative to the remote consensus system to which the message should be sent on arrival.
  • xcm: The message to be exported.

As an example, to export a message for execution on Statemine (parachain #1000 in the Kusama network), you would call with network: NetworkId::Kusama and destination: X1(Parachain(1000)). Alternatively, to export a message for execution on Polkadot, you would call with network: NetworkId:: Polkadot and destination: Here.

Kind: Command

Errors: Fallible.

§

LockAsset

Fields

§unlocker: MultiLocation

Lock the locally held asset and prevent further transfer or withdrawal.

This restriction may be removed by the UnlockAsset instruction being called with an Origin of unlocker and a target equal to the current Origin.

If the locking is successful, then a NoteUnlockable instruction is sent to unlocker.

  • asset: The asset(s) which should be locked.
  • unlocker: The value which the Origin must be for a corresponding UnlockAsset instruction to work.

Kind: Command.

Errors:

§

UnlockAsset

Fields

Remove the lock over asset on this chain and (if nothing else is preventing it) allow the asset to be transferred.

  • asset: The asset to be unlocked.
  • target: The owner of the asset on the local chain.

Safety: No concerns.

Kind: Command.

Errors:

§

NoteUnlockable

Fields

Asset (asset) has been locked on the origin system and may not be transferred. It may only be unlocked with the receipt of the UnlockAsset instruction from this chain.

  • asset: The asset(s) which are now unlockable from this origin.
  • owner: The owner of the asset on the chain in which it was locked. This may be a location specific to the origin network.

Safety: origin must be trusted to have locked the corresponding asset prior as a consequence of sending this message.

Kind: Trusted Indication.

Errors:

§

RequestUnlock

Fields

Send an UnlockAsset instruction to the locker for the given asset.

This may fail if the local system is making use of the fact that the asset is locked or, of course, if there is no record that the asset actually is locked.

  • asset: The asset(s) to be unlocked.
  • locker: The location from which a previous NoteUnlockable was sent and to which an UnlockAsset should be sent.

Kind: Command.

Errors:

§

SetFeesMode

Fields

§jit_withdraw: bool

Sets the Fees Mode Register.

  • jit_withdraw: The fees mode item; if set to true then fees for any instructions are withdrawn as needed using the same mechanism as WithdrawAssets.

Kind: Command.

Errors:

§

SetTopic([u8; 32])

Set the Topic Register.

The 32-byte array identifier in the parameter is not guaranteed to be unique; if such a property is desired, it is up to the code author to enforce uniqueness.

Safety: No concerns.

Kind: Command

Errors:

§

ClearTopic

Clear the Topic Register.

Kind: Command

Errors: None.

§

AliasOrigin(MultiLocation)

Alter the current Origin to another given origin.

Kind: Command

Errors: If the existing state would not allow such a change.

§

UnpaidExecution

Fields

§weight_limit: WeightLimit
§check_origin: Option<MultiLocation>

A directive to indicate that the origin expects free execution of the message.

At execution time, this instruction just does a check on the Origin register. However, at the barrier stage messages starting with this instruction can be disregarded if the origin is not acceptable for free execution or the weight_limit is Limited and insufficient.

Kind: Indication

Errors: If the given origin is Some and not equal to the current Origin register.

Implementations§

source§

impl<Call> Instruction<Call>

source

pub fn into<C>(self) -> Instruction<C>

source

pub fn from<C>(xcm: Instruction<C>) -> Instruction<Call>

Trait Implementations§

source§

impl<Call> Clone for Instruction<Call>

source§

fn clone(&self) -> Instruction<Call>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<Call> Debug for Instruction<Call>

source§

fn fmt(&self, __f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl<Call> Decode for Instruction<Call>

source§

fn decode<__CodecInputEdqy>( __codec_input_edqy: &mut __CodecInputEdqy ) -> Result<Instruction<Call>, Error>where __CodecInputEdqy: Input,

Attempt to deserialise the value from input.
§

fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self> ) -> Result<DecodeFinished, Error>where I: Input,

Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
§

fn skip<I>(input: &mut I) -> Result<(), Error>where I: Input,

Attempt to skip the encoded value from input. Read more
§

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type. Read more
source§

impl<Call> Encode for Instruction<Call>

source§

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding. Read more
source§

fn encode_to<__CodecOutputEdqy>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy )where __CodecOutputEdqy: Output + ?Sized,

Convert self to a slice and append it to the destination.
§

fn encode(&self) -> Vec<u8, Global>

Convert self to an owned vector.
§

fn using_encoded<R, F>(&self, f: F) -> Rwhere F: FnOnce(&[u8]) -> R,

Convert self to a slice and then invoke the given closure with it.
§

fn encoded_size(&self) -> usize

Calculates the encoded size. Read more
source§

impl<Call, W> GetWeight<W> for Instruction<Call>where W: XcmWeightInfo<Call>,

source§

fn weight(&self) -> Weight

source§

impl<Call> PartialEq<Instruction<Call>> for Instruction<Call>

source§

fn eq(&self, other: &Instruction<Call>) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<Call> TryFrom<Instruction<Call>> for Instruction<Call>

§

type Error = ()

The type returned in the event of a conversion error.
source§

fn try_from(old_instruction: Instruction<Call>) -> Result<Instruction<Call>, ()>

Performs the conversion.
source§

impl<Call> TypeInfo for Instruction<Call>where Call: 'static,

§

type Identity = Instruction<Call>

The type identifying for which type info is provided. Read more
source§

fn type_info() -> Type<MetaForm>

Returns the static type identifier for Self.
source§

impl<Call> EncodeLike<Instruction<Call>> for Instruction<Call>

source§

impl<Call> Eq for Instruction<Call>

Auto Trait Implementations§

§

impl<Call> RefUnwindSafe for Instruction<Call>where Call: RefUnwindSafe,

§

impl<Call> Send for Instruction<Call>where Call: Send,

§

impl<Call> Sync for Instruction<Call>where Call: Sync,

§

impl<Call> Unpin for Instruction<Call>where Call: Unpin,

§

impl<Call> UnwindSafe for Instruction<Call>where Call: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckedConversion for T

§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> Twhere Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> DecodeAll for Twhere T: Decode,

§

fn decode_all(input: &mut &[u8]) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

impl<T> DecodeLimit for Twhere T: Decode,

§

fn decode_all_with_depth_limit( limit: u32, input: &mut &[u8] ) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

fn decode_with_depth_limit<I>(limit: u32, input: &mut I) -> Result<T, Error>where I: Input,

Decode Self with the given maximum recursion depth and advance input by the number of bytes consumed. Read more
source§

impl<T> DynClone for Twhere T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Hashable for Twhere T: Codec,

§

fn blake2_128(&self) -> [u8; 16]

§

fn blake2_256(&self) -> [u8; 32]

§

fn blake2_128_concat(&self) -> Vec<u8, Global>

§

fn twox_128(&self) -> [u8; 16]

§

fn twox_256(&self) -> [u8; 32]

§

fn twox_64_concat(&self) -> Vec<u8, Global>

§

fn identity(&self) -> Vec<u8, Global>

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> IsType<T> for T

§

fn from_ref(t: &T) -> &T

Cast reference.
§

fn into_ref(&self) -> &T

Cast reference.
§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> KeyedVec for Twhere T: Codec,

§

fn to_keyed_vec(&self, prepend_key: &[u8]) -> Vec<u8, Global>

Return an encoding of Self prepended by given slice.
§

impl<T> Pipe for Twhere T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> Rwhere Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> Rwhere R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> Rwhere R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> Rwhere Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> Rwhere Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> Rwhere Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> Rwhere Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> Rwhere Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> Rwhere Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
§

impl<T> SaturatedConversion for T

§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Selfwhere Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Selfwhere Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Selfwhere Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Selfwhere Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Selfwhere Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Selfwhere Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<S> Codec for Swhere S: Decode + Encode,

§

impl<T> EncodeLike<&&T> for Twhere T: Encode,

§

impl<T> EncodeLike<&T> for Twhere T: Encode,

§

impl<T> EncodeLike<&mut T> for Twhere T: Encode,

§

impl<T> EncodeLike<Arc<T>> for Twhere T: Encode,

§

impl<T> EncodeLike<Box<T, Global>> for Twhere T: Encode,

§

impl<'a, T> EncodeLike<Cow<'a, T>> for Twhere T: ToOwned + Encode,

§

impl<T> EncodeLike<Rc<T>> for Twhere T: Encode,

§

impl<S> FullCodec for Swhere S: Decode + FullEncode,

§

impl<S> FullEncode for Swhere S: Encode + EncodeLike<S>,

§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for Twhere T: Debug,

§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

§

impl<T> Member for Twhere T: Send + Sync + Debug + Eq + PartialEq<T> + Clone + 'static,

§

impl<T> Parameter for Twhere T: Codec + EncodeLike<T> + Clone + Eq + Debug + TypeInfo,

§

impl<T> StaticTypeInfo for Twhere T: TypeInfo + 'static,