pub struct ReturnFlags { /* private fields */ }
Expand description

Flags used by a contract to customize exit behaviour.

Implementations§

source§

impl ReturnFlags

source

pub const REVERT: Self = _

If this bit is set all changes made by the contract execution are rolled back.

source

pub const fn empty() -> Self

Returns an empty set of flags.

source

pub const fn all() -> Self

Returns the set containing all flags.

source

pub const fn bits(&self) -> u32

Returns the raw value of the flags currently stored.

source

pub const fn from_bits(bits: u32) -> Option<Self>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

source

pub const fn from_bits_truncate(bits: u32) -> Self

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

source

pub const unsafe fn from_bits_unchecked(bits: u32) -> Self

Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).

Safety

The caller of the bitflags! macro can chose to allow or disallow extra bits for their bitflags type.

The caller of from_bits_unchecked() has to ensure that all bits correspond to a defined flag or that extra bits are valid for this bitflags type.

source

pub const fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

source

pub const fn is_all(&self) -> bool

Returns true if all flags are currently set.

source

pub const fn intersects(&self, other: Self) -> bool

Returns true if there are flags common to both self and other.

source

pub const fn contains(&self, other: Self) -> bool

Returns true if all of the flags in other are contained within self.

source

pub fn insert(&mut self, other: Self)

Inserts the specified flags in-place.

source

pub fn remove(&mut self, other: Self)

Removes the specified flags in-place.

source

pub fn toggle(&mut self, other: Self)

Toggles the specified flags in-place.

source

pub fn set(&mut self, other: Self, value: bool)

Inserts or removes the specified flags depending on the passed value.

source

pub const fn intersection(self, other: Self) -> Self

Returns the intersection between the flags in self and other.

Specifically, the returned set contains only the flags which are present in both self and other.

This is equivalent to using the & operator (e.g. ops::BitAnd), as in flags & other.

source

pub const fn union(self, other: Self) -> Self

Returns the union of between the flags in self and other.

Specifically, the returned set contains all flags which are present in either self or other, including any which are present in both (see Self::symmetric_difference if that is undesirable).

This is equivalent to using the | operator (e.g. ops::BitOr), as in flags | other.

source

pub const fn difference(self, other: Self) -> Self

Returns the difference between the flags in self and other.

Specifically, the returned set contains all flags present in self, except for the ones present in other.

It is also conceptually equivalent to the “bit-clear” operation: flags & !other (and this syntax is also supported).

This is equivalent to using the - operator (e.g. ops::Sub), as in flags - other.

source

pub const fn symmetric_difference(self, other: Self) -> Self

Returns the symmetric difference between the flags in self and other.

Specifically, the returned set contains the flags present which are present in self or other, but that are not present in both. Equivalently, it contains the flags present in exactly one of the sets self and other.

This is equivalent to using the ^ operator (e.g. ops::BitXor), as in flags ^ other.

source

pub const fn complement(self) -> Self

Returns the complement of this set of flags.

Specifically, the returned set contains all the flags which are not set in self, but which are allowed for this type.

Alternatively, it can be thought of as the set difference between Self::all() and self (e.g. Self::all() - self)

This is equivalent to using the ! operator (e.g. ops::Not), as in !flags.

Trait Implementations§

source§

impl Binary for ReturnFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl BitAnd<ReturnFlags> for ReturnFlags

source§

fn bitand(self, other: Self) -> Self

Returns the intersection between the two sets of flags.

§

type Output = ReturnFlags

The resulting type after applying the & operator.
source§

impl BitAndAssign<ReturnFlags> for ReturnFlags

source§

fn bitand_assign(&mut self, other: Self)

Disables all flags disabled in the set.

source§

impl BitOr<ReturnFlags> for ReturnFlags

source§

fn bitor(self, other: ReturnFlags) -> Self

Returns the union of the two sets of flags.

§

type Output = ReturnFlags

The resulting type after applying the | operator.
source§

impl BitOrAssign<ReturnFlags> for ReturnFlags

source§

fn bitor_assign(&mut self, other: Self)

Adds the set of flags.

source§

impl BitXor<ReturnFlags> for ReturnFlags

source§

fn bitxor(self, other: Self) -> Self

Returns the left flags, but with all the right flags toggled.

§

type Output = ReturnFlags

The resulting type after applying the ^ operator.
source§

impl BitXorAssign<ReturnFlags> for ReturnFlags

source§

fn bitxor_assign(&mut self, other: Self)

Toggles the set of flags.

source§

impl Clone for ReturnFlags

source§

fn clone(&self) -> ReturnFlags

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ReturnFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Decode for ReturnFlags

source§

fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy ) -> Result<Self, Error>

Attempt to deserialise the value from input.
§

fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self> ) -> Result<DecodeFinished, Error>where I: Input,

Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
§

fn skip<I>(input: &mut I) -> Result<(), Error>where I: Input,

Attempt to skip the encoded value from input. Read more
§

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type. Read more
source§

impl Encode for ReturnFlags

source§

fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy )

Convert self to a slice and append it to the destination.
source§

fn encode(&self) -> Vec<u8>

Convert self to an owned vector.
source§

fn using_encoded<R, F: FnOnce(&[u8]) -> R>(&self, f: F) -> R

Convert self to a slice and then invoke the given closure with it.
§

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding. Read more
§

fn encoded_size(&self) -> usize

Calculates the encoded size. Read more
source§

impl Extend<ReturnFlags> for ReturnFlags

source§

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

Extends a collection with the contents of an iterator. Read more
source§

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)
Extends a collection with exactly one element.
source§

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)
Reserves capacity in a collection for the given number of additional elements. Read more
source§

impl FromIterator<ReturnFlags> for ReturnFlags

source§

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

Creates a value from an iterator. Read more
source§

impl Hash for ReturnFlags

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl LowerHex for ReturnFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Not for ReturnFlags

source§

fn not(self) -> Self

Returns the complement of this set of flags.

§

type Output = ReturnFlags

The resulting type after applying the ! operator.
source§

impl Octal for ReturnFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Ord for ReturnFlags

source§

fn cmp(&self, other: &ReturnFlags) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd<Self>,

Restrict a value to a certain interval. Read more
source§

impl PartialEq<ReturnFlags> for ReturnFlags

source§

fn eq(&self, other: &ReturnFlags) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd<ReturnFlags> for ReturnFlags

source§

fn partial_cmp(&self, other: &ReturnFlags) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Sub<ReturnFlags> for ReturnFlags

source§

fn sub(self, other: Self) -> Self

Returns the set difference of the two sets of flags.

§

type Output = ReturnFlags

The resulting type after applying the - operator.
source§

impl SubAssign<ReturnFlags> for ReturnFlags

source§

fn sub_assign(&mut self, other: Self)

Disables all flags enabled in the set.

source§

impl TypeInfo for ReturnFlags

§

type Identity = ReturnFlags

The type identifying for which type info is provided. Read more
source§

fn type_info() -> Type

Returns the static type identifier for Self.
source§

impl UpperHex for ReturnFlags

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.
source§

impl Copy for ReturnFlags

source§

impl EncodeLike<ReturnFlags> for ReturnFlags

source§

impl Eq for ReturnFlags

source§

impl StructuralEq for ReturnFlags

source§

impl StructuralPartialEq for ReturnFlags

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CallHasher for Twhere T: Hash + ?Sized,

§

fn get_hash<H, B>(value: &H, build_hasher: &B) -> u64where H: Hash + ?Sized, B: BuildHasher,

source§

impl<T> CheckedConversion for T

source§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
source§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> DecodeAll for Twhere T: Decode,

§

fn decode_all(input: &mut &[u8]) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

impl<T> DecodeLimit for Twhere T: Decode,

§

fn decode_all_with_depth_limit( limit: u32, input: &mut &[u8] ) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

fn decode_with_depth_limit<I>(limit: u32, input: &mut I) -> Result<T, Error>where I: Input,

Decode Self with the given maximum recursion depth and advance input by the number of bytes consumed. Read more
source§

impl<T> DynClone for Twhere T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

source§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

source§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> KeyedVec for Twhere T: Codec,

§

fn to_keyed_vec(&self, prepend_key: &[u8]) -> Vec<u8, Global>

Return an encoding of Self prepended by given slice.
§

impl<T> Pointable for T

§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> SaturatedConversion for T

source§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
source§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

source§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
source§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

source§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<S> Codec for Swhere S: Decode + Encode,

§

impl<T> EncodeLike<&&T> for Twhere T: Encode,

§

impl<T> EncodeLike<&T> for Twhere T: Encode,

§

impl<T> EncodeLike<&mut T> for Twhere T: Encode,

§

impl<T> EncodeLike<Arc<T>> for Twhere T: Encode,

§

impl<T> EncodeLike<Box<T, Global>> for Twhere T: Encode,

§

impl<'a, T> EncodeLike<Cow<'a, T>> for Twhere T: ToOwned + Encode,

§

impl<T> EncodeLike<Rc<T>> for Twhere T: Encode,

§

impl<S> FullCodec for Swhere S: Decode + FullEncode,

§

impl<S> FullEncode for Swhere S: Encode + EncodeLike<S>,

§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeHash for Twhere T: Hash,

source§

impl<T> MaybeHash for Twhere T: Hash,

source§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

source§

impl<T> Member for Twhere T: Send + Sync + Debug + Eq + PartialEq<T> + Clone + 'static,

§

impl<T> StaticTypeInfo for Twhere T: TypeInfo + 'static,