pub struct Pallet<T>(_);
Expand description

The pallet implementing the on-chain logic.

Implementations§

source§

impl<T: Config> Pallet<T>

source

pub fn buy_ticket( origin: OriginFor<T>, call: Box<<T as Config>::RuntimeCall> ) -> DispatchResult

Buy a ticket to enter the lottery.

This extrinsic acts as a passthrough function for call. In all situations where call alone would succeed, this extrinsic should succeed.

If call is successful, then we will attempt to purchase a ticket, which may fail silently. To detect success of a ticket purchase, you should listen for the TicketBought event.

This extrinsic must be called by a signed origin.

source

pub fn set_calls( origin: OriginFor<T>, calls: Vec<<T as Config>::RuntimeCall> ) -> DispatchResult

Set calls in storage which can be used to purchase a lottery ticket.

This function only matters if you use the ValidateCall implementation provided by this pallet, which uses storage to determine the valid calls.

This extrinsic must be called by the Manager origin.

source

pub fn start_lottery( origin: OriginFor<T>, price: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, length: T::BlockNumber, delay: T::BlockNumber, repeat: bool ) -> DispatchResult

Start a lottery using the provided configuration.

This extrinsic must be called by the ManagerOrigin.

Parameters:

  • price: The cost of a single ticket.
  • length: How long the lottery should run for starting at the current block.
  • delay: How long after the lottery end we should wait before picking a winner.
  • repeat: If the lottery should repeat when completed.
source

pub fn stop_repeat(origin: OriginFor<T>) -> DispatchResult

If a lottery is repeating, you can use this to stop the repeat. The lottery will continue to run to completion.

This extrinsic must be called by the ManagerOrigin.

source§

impl<T: Config> Pallet<T>

source

pub fn account_id() -> T::AccountId

The account ID of the lottery pot.

This actually does computation. If you need to keep using it, then make sure you cache the value and only call this once.

Trait Implementations§

source§

impl<T> Benchmarking for Pallet<T>where T: Config + Config,

source§

fn benchmarks(extra: bool) -> Vec<BenchmarkMetadata>

Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”. Read more
source§

fn run_benchmark( extrinsic: &[u8], c: &[(BenchmarkParameter, u32)], whitelist: &[TrackedStorageKey], verify: bool, internal_repeats: u32 ) -> Result<Vec<BenchmarkResult>, BenchmarkError>

Run the benchmarks for this pallet.
source§

impl<T: Config> Callable<T> for Pallet<T>

source§

impl<T> Clone for Pallet<T>

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T> Debug for Pallet<T>

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T: Config> GetStorageVersion for Pallet<T>

§

type CurrentStorageVersion = NoStorageVersionSet

This will be filled out by the pallet macro. Read more
source§

fn current_storage_version() -> Self::CurrentStorageVersion

Returns the current storage version as supported by the pallet.
source§

fn on_chain_storage_version() -> StorageVersion

Returns the on-chain storage version of the pallet as stored in the storage.
source§

impl<T: Config> Hooks<<T as Config>::BlockNumber> for Pallet<T>

source§

fn on_initialize(n: T::BlockNumber) -> Weight

The block is being initialized. Implement to have something happen. Read more
source§

fn on_finalize(_n: BlockNumber)

The block is being finalized. Implement to have something happen.
source§

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

This will be run when the block is being finalized (before on_finalize). Read more
source§

fn on_runtime_upgrade() -> Weight

Perform a module upgrade. Read more
source§

fn try_state(_n: BlockNumber) -> Result<(), DispatchError>

Execute the sanity checks of this pallet, per block. Read more
source§

fn pre_upgrade() -> Result<Vec<u8, Global>, DispatchError>

Execute some pre-checks prior to a runtime upgrade. Read more
source§

fn post_upgrade(_state: Vec<u8, Global>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade. Read more
source§

fn offchain_worker(_n: BlockNumber)

Implementing this function on a module allows you to perform long-running tasks that make (by default) validators generate transactions that feed results of those long-running computations back on chain. Read more
source§

fn integrity_test()

Run integrity test. Read more
source§

impl<T: Config> IntegrityTest for Pallet<T>

source§

fn integrity_test()

Run integrity test. Read more
source§

impl<T: Config> OffchainWorker<<T as Config>::BlockNumber> for Pallet<T>

source§

fn offchain_worker(n: <T as Config>::BlockNumber)

This function is being called after every block import (when fully synced). Read more
source§

impl<T: Config> OnFinalize<<T as Config>::BlockNumber> for Pallet<T>

source§

fn on_finalize(n: <T as Config>::BlockNumber)

The block is being finalized. Implement to have something happen. Read more
source§

impl<T: Config> OnGenesis for Pallet<T>

source§

fn on_genesis()

Something that should happen at genesis.
source§

impl<T: Config> OnIdle<<T as Config>::BlockNumber> for Pallet<T>

source§

fn on_idle(n: <T as Config>::BlockNumber, remaining_weight: Weight) -> Weight

The block is being finalized. Implement to have something happen in case there is leftover weight. Check the passed remaining_weight to make sure it is high enough to allow for your pallet’s extra computation. Read more
source§

impl<T: Config> OnInitialize<<T as Config>::BlockNumber> for Pallet<T>

source§

fn on_initialize(n: <T as Config>::BlockNumber) -> Weight

The block is being initialized. Implement to have something happen. Read more
source§

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

source§

fn on_runtime_upgrade() -> Weight

Perform a module upgrade. Read more
source§

fn pre_upgrade() -> Result<Vec<u8>, TryRuntimeError>

Execute some pre-checks prior to a runtime upgrade. Read more
source§

fn post_upgrade(state: Vec<u8>) -> Result<(), TryRuntimeError>

Execute some post-checks after a runtime upgrade. Read more
source§

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

Same as on_runtime_upgrade, but perform the optional pre_upgrade and post_upgrade as well.
source§

impl<T: Config> PalletInfoAccess for Pallet<T>

source§

fn index() -> usize

Index of the pallet as configured in the runtime.
source§

fn name() -> &'static str

Name of the pallet as configured in the runtime.
source§

fn module_name() -> &'static str

Name of the Rust module containing the pallet.
source§

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.
source§

impl<T: Config> PalletsInfoAccess for Pallet<T>

source§

fn count() -> usize

The number of pallets’ information that this type represents. Read more
source§

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.
source§

impl<T> PartialEq<Pallet<T>> for Pallet<T>

source§

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<T: Config> StorageInfoTrait for Pallet<T>

source§

impl<T: Config> TryState<<T as Config>::BlockNumber> for Pallet<T>

source§

fn try_state( n: <T as Config>::BlockNumber, _s: TryStateSelect ) -> Result<(), TryRuntimeError>

Execute the state checks.
source§

impl<T: Config> ValidateCall<T> for Pallet<T>

source§

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

source§

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.
source§

impl<T> Eq for Pallet<T>

Auto Trait Implementations§

§

impl<T> RefUnwindSafe for Pallet<T>where T: RefUnwindSafe,

§

impl<T> Send for Pallet<T>where T: Send,

§

impl<T> Sync for Pallet<T>where T: Sync,

§

impl<T> Unpin for Pallet<T>where T: Unpin,

§

impl<T> UnwindSafe for Pallet<T>where T: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CheckedConversion for T

source§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
source§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> Downcast for Twhere T: Any,

§

fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for Twhere T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync + 'static>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> DynClone for Twhere T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IsType<T> for T

source§

fn from_ref(t: &T) -> &T

Cast reference.
source§

fn into_ref(&self) -> &T

Cast reference.
source§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
source§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
source§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

source§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

source§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> Pointable for T

§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> SaturatedConversion for T

source§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
source§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<SS, SP> SupersetOf<SS> for SPwhere SS: SubsetOf<SP>,

§

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more
§

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).
§

fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.
§

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

source§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
source§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

source§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

source§

impl<T> Member for Twhere T: Send + Sync + Debug + Eq + PartialEq<T> + Clone + 'static,

source§

impl<T> Scalar for Twhere T: 'static + Clone + PartialEq<T> + Debug,