referrerpolicy=no-referrer-when-downgrade

Enum pallet_lottery::pallet::Call

source ·
pub enum Call<T: Config> {
    buy_ticket {
        call: Box<<T as Config>::RuntimeCall>,
    },
    set_calls {
        calls: Vec<<T as Config>::RuntimeCall>,
    },
    start_lottery {
        price: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance,
        length: BlockNumberFor<T>,
        delay: BlockNumberFor<T>,
        repeat: bool,
    },
    stop_repeat {},
    // some variants omitted
}
Expand description

Contains a variant per dispatchable extrinsic that this pallet has.

Variants§

§

buy_ticket

Buy a ticket to enter the lottery.

This extrinsic acts as a passthrough function for call. In all situations where call alone would succeed, this extrinsic should succeed.

If call is successful, then we will attempt to purchase a ticket, which may fail silently. To detect success of a ticket purchase, you should listen for the TicketBought event.

This extrinsic must be called by a signed origin.

Fields

§call: Box<<T as Config>::RuntimeCall>
§

set_calls

Set calls in storage which can be used to purchase a lottery ticket.

This function only matters if you use the ValidateCall implementation provided by this pallet, which uses storage to determine the valid calls.

This extrinsic must be called by the Manager origin.

Fields

§calls: Vec<<T as Config>::RuntimeCall>
§

start_lottery

Start a lottery using the provided configuration.

This extrinsic must be called by the ManagerOrigin.

Parameters:

  • price: The cost of a single ticket.
  • length: How long the lottery should run for starting at the current block.
  • delay: How long after the lottery end we should wait before picking a winner.
  • repeat: If the lottery should repeat when completed.

Fields

§price: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance
§length: BlockNumberFor<T>
§delay: BlockNumberFor<T>
§repeat: bool
§

stop_repeat

If a lottery is repeating, you can use this to stop the repeat. The lottery will continue to run to completion.

This extrinsic must be called by the ManagerOrigin.

Implementations§

source§

impl<T: Config> Call<T>

source

pub fn new_call_variant_buy_ticket( call: Box<<T as Config>::RuntimeCall>, ) -> Self

Create a call with the variant buy_ticket.

source

pub fn new_call_variant_set_calls( calls: Vec<<T as Config>::RuntimeCall>, ) -> Self

Create a call with the variant set_calls.

source

pub fn new_call_variant_start_lottery( price: <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance, length: BlockNumberFor<T>, delay: BlockNumberFor<T>, repeat: bool, ) -> Self

Create a call with the variant start_lottery.

source

pub fn new_call_variant_stop_repeat() -> Self

Create a call with the variant stop_repeat.

Trait Implementations§

source§

impl<T: Config> CheckIfFeeless for Call<T>

§

type Origin = <T as Config>::RuntimeOrigin

The Origin type of the runtime.
source§

fn is_feeless(&self, origin: &Self::Origin) -> bool

Checks if the dispatchable satisfies the feeless condition as defined by #[pallet::feeless_if]
source§

impl<T: Config> Clone for Call<T>

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T: Config> Debug for Call<T>

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T: Config> Decode for Call<T>

source§

fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy, ) -> Result<Self, Error>

Attempt to deserialise the value from input.
§

fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self>, ) -> Result<DecodeFinished, Error>
where I: Input,

Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
§

fn skip<I>(input: &mut I) -> Result<(), Error>
where I: Input,

Attempt to skip the encoded value from input. Read more
§

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type. Read more
source§

impl<T: Config> Encode for Call<T>

source§

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding. Read more
source§

fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy, )

Convert self to a slice and append it to the destination.
§

fn encode(&self) -> Vec<u8>

Convert self to an owned vector.
§

fn using_encoded<R, F>(&self, f: F) -> R
where F: FnOnce(&[u8]) -> R,

Convert self to a slice and then invoke the given closure with it.
§

fn encoded_size(&self) -> usize

Calculates the encoded size. Read more
source§

impl<T: Config> GetCallIndex for Call<T>

source§

fn get_call_index(&self) -> u8

Return the index of this Call.
source§

fn get_call_indices() -> &'static [u8]

Return all call indices in the same order as [GetCallName].
source§

impl<T: Config> GetCallName for Call<T>

source§

fn get_call_name(&self) -> &'static str

Return the function name of the Call.
source§

fn get_call_names() -> &'static [&'static str]

Return all function names in the same order as [GetCallIndex].
source§

impl<T: Config> GetDispatchInfo for Call<T>

source§

fn get_dispatch_info(&self) -> DispatchInfo

Return a DispatchInfo, containing relevant information of this dispatch. Read more
source§

impl<T: Config> PartialEq for Call<T>

source§

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<T> TypeInfo for Call<T>
where PhantomData<(T,)>: TypeInfo + 'static, Box<<T as Config>::RuntimeCall>: TypeInfo + 'static, Vec<<T as Config>::RuntimeCall>: TypeInfo + 'static, <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance: TypeInfo + 'static, BlockNumberFor<T>: TypeInfo + 'static, T: Config + 'static,

§

type Identity = Call<T>

The type identifying for which type info is provided. Read more
source§

fn type_info() -> Type

Returns the static type identifier for Self.
source§

impl<T: Config> UnfilteredDispatchable for Call<T>

§

type RuntimeOrigin = <T as Config>::RuntimeOrigin

The origin type of the runtime, (i.e. frame_system::Config::RuntimeOrigin).
source§

fn dispatch_bypass_filter( self, origin: Self::RuntimeOrigin, ) -> DispatchResultWithPostInfo

Dispatch this call but do not check the filter in origin.
source§

impl<T: Config> EncodeLike for Call<T>

source§

impl<T: Config> Eq for Call<T>

Auto Trait Implementations§

§

impl<T> Freeze for Call<T>
where <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance: Freeze, <<<T as Config>::Block as Block>::Header as Header>::Number: Freeze,

§

impl<T> RefUnwindSafe for Call<T>
where <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance: RefUnwindSafe, <<<T as Config>::Block as Block>::Header as Header>::Number: RefUnwindSafe, T: RefUnwindSafe, <T as Config>::RuntimeCall: RefUnwindSafe,

§

impl<T> Send for Call<T>
where T: Send, <T as Config>::RuntimeCall: Send,

§

impl<T> Sync for Call<T>
where T: Sync, <T as Config>::RuntimeCall: Sync,

§

impl<T> Unpin for Call<T>
where <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance: Unpin, <<<T as Config>::Block as Block>::Header as Header>::Number: Unpin, T: Unpin, <T as Config>::RuntimeCall: Unpin,

§

impl<T> UnwindSafe for Call<T>
where <<T as Config>::Currency as Currency<<T as Config>::AccountId>>::Balance: UnwindSafe, <<<T as Config>::Block as Block>::Header as Header>::Number: UnwindSafe, T: UnwindSafe, <T as Config>::RuntimeCall: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckedConversion for T

§

fn checked_from<T>(t: T) -> Option<Self>
where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
§

fn checked_into<T>(self) -> Option<T>
where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> DecodeAll for T
where T: Decode,

§

fn decode_all(input: &mut &[u8]) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

impl<T> DecodeLimit for T
where T: Decode,

§

fn decode_all_with_depth_limit( limit: u32, input: &mut &[u8], ) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

fn decode_with_depth_limit<I>(limit: u32, input: &mut I) -> Result<T, Error>
where I: Input,

Decode Self with the given maximum recursion depth and advance input by the number of bytes consumed. Read more
source§

impl<T> DynClone for T
where T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Hashable for T
where T: Codec,

§

fn blake2_128(&self) -> [u8; 16]

§

fn blake2_256(&self) -> [u8; 32]

§

fn blake2_128_concat(&self) -> Vec<u8>

§

fn twox_128(&self) -> [u8; 16]

§

fn twox_256(&self) -> [u8; 32]

§

fn twox_64_concat(&self) -> Vec<u8>

§

fn identity(&self) -> Vec<u8>

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T, U> IntoKey<U> for T
where U: FromKey<T>,

§

fn into_key(self) -> U

§

impl<Src, Dest> IntoTuple<Dest> for Src
where Dest: FromTuple<Src>,

§

fn into_tuple(self) -> Dest

§

impl<T> IsType<T> for T

§

fn from_ref(t: &T) -> &T

Cast reference.
§

fn into_ref(&self) -> &T

Cast reference.
§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
§

impl<T, Outer> IsWrappedBy<Outer> for T
where Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> KeyedVec for T
where T: Codec,

§

fn to_keyed_vec(&self, prepend_key: &[u8]) -> Vec<u8>

Return an encoding of Self prepended by given slice.
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
§

impl<T> SaturatedConversion for T

§

fn saturated_from<T>(t: T) -> Self
where Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
§

fn saturated_into<T>(self) -> T
where Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<SS, SP> SupersetOf<SS> for SP
where SS: SubsetOf<SP>,

§

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more
§

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).
§

fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.
§

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T, U> TryIntoKey<U> for T
where U: TryFromKey<T>,

§

type Error = <U as TryFromKey<T>>::Error

§

fn try_into_key(self) -> Result<U, <U as TryFromKey<T>>::Error>

§

impl<S, T> UncheckedInto<T> for S
where T: UncheckedFrom<S>,

§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
§

impl<T, S> UniqueSaturatedInto<T> for S
where T: Bounded, S: TryInto<T>,

§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<S> Codec for S
where S: Decode + Encode,

§

impl<T> EncodeLike<&&T> for T
where T: Encode,

§

impl<T> EncodeLike<&T> for T
where T: Encode,

§

impl<T> EncodeLike<&mut T> for T
where T: Encode,

§

impl<T> EncodeLike<Arc<T>> for T
where T: Encode,

§

impl<T> EncodeLike<Box<T>> for T
where T: Encode,

§

impl<'a, T> EncodeLike<Cow<'a, T>> for T
where T: ToOwned + Encode,

§

impl<T> EncodeLike<Rc<T>> for T
where T: Encode,

§

impl<S> FullCodec for S
where S: Decode + FullEncode,

§

impl<S> FullEncode for S
where S: Encode + EncodeLike,

§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for T
where T: Debug,

§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

§

impl<T> Member for T
where T: Send + Sync + Debug + Eq + PartialEq + Clone + 'static,

§

impl<T> Parameter for T
where T: Codec + EncodeLike + Clone + Eq + Debug + TypeInfo,

source§

impl<T> Scalar for T
where T: 'static + Clone + PartialEq + Debug,

§

impl<T> StaticTypeInfo for T
where T: TypeInfo + 'static,