referrerpolicy=no-referrer-when-downgrade
pub struct ChargeTransactionPayment<T: Config>(/* private fields */);
Expand description

Require the transactor pay for themselves and maybe include a tip to gain additional priority in the queue.

§Transaction Validity

This extension sets the priority field of TransactionValidity depending on the amount of tip being paid per weight unit.

Operational transactions will receive an additional priority bump, so that they are normally considered before regular transactions.

Implementations§

source§

impl<T: Config> ChargeTransactionPayment<T>
where T::RuntimeCall: Dispatchable<Info = DispatchInfo, PostInfo = PostDispatchInfo>, <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: Send + Sync,

source

pub fn from( fee: <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance, ) -> Self

utility constructor. Used only in client/factory code.

source

pub fn tip( &self, ) -> <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance

Returns the tip as being chosen by the transaction sender.

source

pub fn get_priority( info: &DispatchInfoOf<T::RuntimeCall>, len: usize, tip: <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance, final_fee: <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance, ) -> TransactionPriority

Get an appropriate priority for a transaction with the given DispatchInfo, encoded length and user-included tip.

The priority is based on the amount of tip the user is willing to pay per unit of either weight or length, depending which one is more limiting. For Operational extrinsics we add a “virtual tip” to the calculations.

The formula should simply be tip / bounded_{weight|length}, but since we are using integer division, we have no guarantees it’s going to give results in any reasonable range (might simply end up being zero). Hence we use a scaling factor: tip * (max_block_{weight|length} / bounded_{weight|length}), since given current state of-the-art blockchains, number of per-block transactions is expected to be in a range reasonable enough to not saturate the Balance type while multiplying by the tip.

Trait Implementations§

source§

impl<T: Clone + Config> Clone for ChargeTransactionPayment<T>

source§

fn clone(&self) -> ChargeTransactionPayment<T>

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T: Config> Debug for ChargeTransactionPayment<T>

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T: Config> Decode for ChargeTransactionPayment<T>
where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: HasCompact,

source§

fn decode<__CodecInputEdqy: Input>( __codec_input_edqy: &mut __CodecInputEdqy, ) -> Result<Self, Error>

Attempt to deserialise the value from input.
§

fn decode_into<I>( input: &mut I, dst: &mut MaybeUninit<Self>, ) -> Result<DecodeFinished, Error>
where I: Input,

Attempt to deserialize the value from input into a pre-allocated piece of memory. Read more
§

fn skip<I>(input: &mut I) -> Result<(), Error>
where I: Input,

Attempt to skip the encoded value from input. Read more
§

fn encoded_fixed_size() -> Option<usize>

Returns the fixed encoded size of the type. Read more
source§

impl<T: Config> Encode for ChargeTransactionPayment<T>
where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: HasCompact,

source§

fn size_hint(&self) -> usize

If possible give a hint of expected size of the encoding. Read more
source§

fn encode_to<__CodecOutputEdqy: Output + ?Sized>( &self, __codec_dest_edqy: &mut __CodecOutputEdqy, )

Convert self to a slice and append it to the destination.
source§

fn encode(&self) -> Vec<u8>

Convert self to an owned vector.
source§

fn using_encoded<__CodecOutputReturn, __CodecUsingEncodedCallback: FnOnce(&[u8]) -> __CodecOutputReturn>( &self, f: __CodecUsingEncodedCallback, ) -> __CodecOutputReturn

Convert self to a slice and then invoke the given closure with it.
§

fn encoded_size(&self) -> usize

Calculates the encoded size. Read more
source§

impl<T: PartialEq + Config> PartialEq for ChargeTransactionPayment<T>

source§

fn eq(&self, other: &ChargeTransactionPayment<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<T: Config> TransactionExtension<<T as Config>::RuntimeCall> for ChargeTransactionPayment<T>
where T::RuntimeCall: Dispatchable<Info = DispatchInfo, PostInfo = PostDispatchInfo>,

source§

const IDENTIFIER: &'static str = "ChargeTransactionPayment"

Unique identifier of this signed extension. Read more
§

type Implicit = ()

Any additional data which was known at the time of transaction construction and can be useful in authenticating the transaction. This is determined dynamically in part from the on-chain environment using the implicit function and not directly contained in the transaction itself and therefore is considered “implicit”.
§

type Val = Val<T>

The type that encodes information that can be passed from validate to prepare.
§

type Pre = Pre<T>

The type that encodes information that can be passed from prepare to post_dispatch.
source§

fn weight(&self, _: &T::RuntimeCall) -> Weight

The weight consumed by executing this extension instance fully during transaction dispatch.
source§

fn validate( &self, origin: <T::RuntimeCall as Dispatchable>::RuntimeOrigin, call: &T::RuntimeCall, info: &DispatchInfoOf<T::RuntimeCall>, len: usize, _: (), _implication: &impl Encode, _source: TransactionSource, ) -> Result<(ValidTransaction, Self::Val, <T::RuntimeCall as Dispatchable>::RuntimeOrigin), TransactionValidityError>

Validate a transaction for the transaction queue. Read more
source§

fn prepare( self, val: Self::Val, _origin: &<T::RuntimeCall as Dispatchable>::RuntimeOrigin, call: &T::RuntimeCall, info: &DispatchInfoOf<T::RuntimeCall>, _len: usize, ) -> Result<Self::Pre, TransactionValidityError>

Do any pre-flight stuff for a transaction after validation. Read more
source§

fn post_dispatch_details( pre: Self::Pre, info: &DispatchInfoOf<T::RuntimeCall>, post_info: &PostDispatchInfoOf<T::RuntimeCall>, len: usize, _result: &DispatchResult, ) -> Result<Weight, TransactionValidityError>

Do any post-flight stuff for an extrinsic. Read more
§

fn implicit(&self) -> Result<Self::Implicit, TransactionValidityError>

Determine any additional data which was known at the time of transaction construction and can be useful in authenticating the transaction. The expected usage of this is to include in any data which is signed and verified as part of transaction validation. Also perform any pre-signature-verification checks and return an error if needed.
§

fn metadata() -> Vec<TransactionExtensionMetadata>

Returns the metadata for this extension. Read more
§

fn post_dispatch( pre: Self::Pre, info: &<Call as Dispatchable>::Info, post_info: &mut <Call as Dispatchable>::PostInfo, len: usize, result: &Result<(), DispatchError>, ) -> Result<(), TransactionValidityError>

A wrapper for post_dispatch_details that refunds the unspent weight consumed by this extension into the post dispatch information. Read more
§

fn bare_validate( _call: &Call, _info: &<Call as Dispatchable>::Info, _len: usize, ) -> Result<ValidTransaction, TransactionValidityError>

Validation logic for bare extrinsics. Read more
§

fn bare_validate_and_prepare( _call: &Call, _info: &<Call as Dispatchable>::Info, _len: usize, ) -> Result<(), TransactionValidityError>

All pre-flight logic run before dispatching bare extrinsics. Read more
§

fn bare_post_dispatch( _info: &<Call as Dispatchable>::Info, _post_info: &mut <Call as Dispatchable>::PostInfo, _len: usize, _result: &Result<(), DispatchError>, ) -> Result<(), TransactionValidityError>

Post dispatch logic run after dispatching bare extrinsics. Read more
source§

impl<T> TypeInfo for ChargeTransactionPayment<T>
where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: HasCompact, T: Config + 'static,

§

type Identity = ChargeTransactionPayment<T>

The type identifying for which type info is provided. Read more
source§

fn type_info() -> Type

Returns the static type identifier for Self.
source§

impl<T: Config> EncodeLike for ChargeTransactionPayment<T>
where <<T as Config>::OnChargeTransaction as OnChargeTransaction<T>>::Balance: HasCompact,

source§

impl<T: Eq + Config> Eq for ChargeTransactionPayment<T>

source§

impl<T: Config> StructuralPartialEq for ChargeTransactionPayment<T>

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CheckedConversion for T

§

fn checked_from<T>(t: T) -> Option<Self>
where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
§

fn checked_into<T>(self) -> Option<T>
where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> DecodeAll for T
where T: Decode,

§

fn decode_all(input: &mut &[u8]) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

impl<T> DecodeLimit for T
where T: Decode,

§

fn decode_all_with_depth_limit( limit: u32, input: &mut &[u8], ) -> Result<T, Error>

Decode Self and consume all of the given input data. Read more
§

fn decode_with_depth_limit<I>(limit: u32, input: &mut I) -> Result<T, Error>
where I: Input,

Decode Self with the given maximum recursion depth and advance input by the number of bytes consumed. Read more
§

impl<T, Call> DispatchTransaction<Call> for T
where T: TransactionExtension<Call>, Call: Dispatchable + Encode, <Call as Dispatchable>::RuntimeOrigin: AsTransactionAuthorizedOrigin,

§

type Origin = <Call as Dispatchable>::RuntimeOrigin

The origin type of the transaction.
§

type Info = <Call as Dispatchable>::Info

The info type.
§

type Result = Result<Result<<Call as Dispatchable>::PostInfo, DispatchErrorWithPostInfo<<Call as Dispatchable>::PostInfo>>, TransactionValidityError>

The resultant type.
§

type Val = <T as TransactionExtension<Call>>::Val

The Val of the extension.
§

type Pre = <T as TransactionExtension<Call>>::Pre

The Pre of the extension.
§

fn validate_only( &self, origin: <T as DispatchTransaction<Call>>::Origin, call: &Call, info: &<Call as Dispatchable>::Info, len: usize, source: TransactionSource, extension_version: u8, ) -> Result<(ValidTransaction, <T as TransactionExtension<Call>>::Val, <T as DispatchTransaction<Call>>::Origin), TransactionValidityError>

Just validate a transaction. Read more
§

fn validate_and_prepare( self, origin: <T as DispatchTransaction<Call>>::Origin, call: &Call, info: &<Call as Dispatchable>::Info, len: usize, extension_version: u8, ) -> Result<(<T as TransactionExtension<Call>>::Pre, <T as DispatchTransaction<Call>>::Origin), TransactionValidityError>

Validate and prepare a transaction, ready for dispatch.
§

fn dispatch_transaction( self, origin: <Call as Dispatchable>::RuntimeOrigin, call: Call, info: &<Call as Dispatchable>::Info, len: usize, extension_version: u8, ) -> <T as DispatchTransaction<Call>>::Result

Dispatch a transaction with the given base origin and call.
§

fn test_run( self, origin: <T as DispatchTransaction<Call>>::Origin, call: &Call, info: &<T as DispatchTransaction<Call>>::Info, len: usize, extension_version: u8, substitute: impl FnOnce(<T as DispatchTransaction<Call>>::Origin) -> Result<<Call as Dispatchable>::PostInfo, DispatchErrorWithPostInfo<<Call as Dispatchable>::PostInfo>>, ) -> <T as DispatchTransaction<Call>>::Result

Do everything which would be done in a dispatch_transaction, but instead of executing the call, execute substitute instead. Since this doesn’t actually dispatch the call, it doesn’t need to consume it and so call can be passed as a reference.
source§

impl<T> DynClone for T
where T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Hashable for T
where T: Codec,

§

fn blake2_128(&self) -> [u8; 16]

§

fn blake2_256(&self) -> [u8; 32]

§

fn blake2_128_concat(&self) -> Vec<u8>

§

fn twox_128(&self) -> [u8; 16]

§

fn twox_256(&self) -> [u8; 32]

§

fn twox_64_concat(&self) -> Vec<u8>

§

fn identity(&self) -> Vec<u8>

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T, U> IntoKey<U> for T
where U: FromKey<T>,

§

fn into_key(self) -> U

§

impl<Src, Dest> IntoTuple<Dest> for Src
where Dest: FromTuple<Src>,

§

fn into_tuple(self) -> Dest

§

impl<T> IsType<T> for T

§

fn from_ref(t: &T) -> &T

Cast reference.
§

fn into_ref(&self) -> &T

Cast reference.
§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
§

impl<T, Outer> IsWrappedBy<Outer> for T
where Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> KeyedVec for T
where T: Codec,

§

fn to_keyed_vec(&self, prepend_key: &[u8]) -> Vec<u8>

Return an encoding of Self prepended by given slice.
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
§

impl<T> SaturatedConversion for T

§

fn saturated_from<T>(t: T) -> Self
where Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
§

fn saturated_into<T>(self) -> T
where Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<SS, SP> SupersetOf<SS> for SP
where SS: SubsetOf<SP>,

§

fn to_subset(&self) -> Option<SS>

The inverse inclusion map: attempts to construct self from the equivalent element of its superset. Read more
§

fn is_in_subset(&self) -> bool

Checks if self is actually part of its subset T (and can be converted to it).
§

fn to_subset_unchecked(&self) -> SS

Use with care! Same as self.to_subset but without any property checks. Always succeeds.
§

fn from_subset(element: &SS) -> SP

The inclusion map: converts self to the equivalent element of its superset.
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T, U> TryIntoKey<U> for T
where U: TryFromKey<T>,

§

type Error = <U as TryFromKey<T>>::Error

§

fn try_into_key(self) -> Result<U, <U as TryFromKey<T>>::Error>

§

impl<S, T> UncheckedInto<T> for S
where T: UncheckedFrom<S>,

§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
§

impl<T, S> UniqueSaturatedInto<T> for S
where T: Bounded, S: TryInto<T>,

§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<S> Codec for S
where S: Decode + Encode,

§

impl<T> EncodeLike<&&T> for T
where T: Encode,

§

impl<T> EncodeLike<&T> for T
where T: Encode,

§

impl<T> EncodeLike<&mut T> for T
where T: Encode,

§

impl<T> EncodeLike<Arc<T>> for T
where T: Encode,

§

impl<T> EncodeLike<Box<T>> for T
where T: Encode,

§

impl<'a, T> EncodeLike<Cow<'a, T>> for T
where T: ToOwned + Encode,

§

impl<T> EncodeLike<Rc<T>> for T
where T: Encode,

§

impl<S> FullCodec for S
where S: Decode + FullEncode,

§

impl<S> FullEncode for S
where S: Encode + EncodeLike,

§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for T
where T: Debug,

§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

§

impl<T> Member for T
where T: Send + Sync + Debug + Eq + PartialEq + Clone + 'static,

§

impl<T> Parameter for T
where T: Codec + EncodeLike + Clone + Eq + Debug + TypeInfo,

source§

impl<T> Scalar for T
where T: 'static + Clone + PartialEq + Debug,

§

impl<T> StaticTypeInfo for T
where T: TypeInfo + 'static,