referrerpolicy=no-referrer-when-downgrade

Struct polkadot_node_subsystem::gen::futures::prelude::sink::Fanout

pub struct Fanout<Si1, Si2> { /* private fields */ }
Expand description

Sink that clones incoming items and forwards them to two sinks at the same time.

Backpressure from any downstream sink propagates up, which means that this sink can only process items as fast as its slowest downstream sink.

Implementations§

§

impl<Si1, Si2> Fanout<Si1, Si2>

pub fn get_ref(&self) -> (&Si1, &Si2)

Get a shared reference to the inner sinks.

pub fn get_mut(&mut self) -> (&mut Si1, &mut Si2)

Get a mutable reference to the inner sinks.

pub fn get_pin_mut( self: Pin<&mut Fanout<Si1, Si2>>, ) -> (Pin<&mut Si1>, Pin<&mut Si2>)

Get a pinned mutable reference to the inner sinks.

pub fn into_inner(self) -> (Si1, Si2)

Consumes this combinator, returning the underlying sinks.

Note that this may discard intermediate state of this combinator, so care should be taken to avoid losing resources when this is called.

Trait Implementations§

§

impl<Si1, Si2> Debug for Fanout<Si1, Si2>
where Si1: Debug, Si2: Debug,

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl<Si1, Si2, Item> Sink<Item> for Fanout<Si1, Si2>
where Si1: Sink<Item>, Item: Clone, Si2: Sink<Item, Error = <Si1 as Sink<Item>>::Error>,

§

type Error = <Si1 as Sink<Item>>::Error

The type of value produced by the sink when an error occurs.
§

fn poll_ready( self: Pin<&mut Fanout<Si1, Si2>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <Fanout<Si1, Si2> as Sink<Item>>::Error>>

Attempts to prepare the Sink to receive a value. Read more
§

fn start_send( self: Pin<&mut Fanout<Si1, Si2>>, item: Item, ) -> Result<(), <Fanout<Si1, Si2> as Sink<Item>>::Error>

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more
§

fn poll_flush( self: Pin<&mut Fanout<Si1, Si2>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <Fanout<Si1, Si2> as Sink<Item>>::Error>>

Flush any remaining output from this sink. Read more
§

fn poll_close( self: Pin<&mut Fanout<Si1, Si2>>, cx: &mut Context<'_>, ) -> Poll<Result<(), <Fanout<Si1, Si2> as Sink<Item>>::Error>>

Flush any remaining output and close this sink, if necessary. Read more
§

impl<'__pin, Si1, Si2> Unpin for Fanout<Si1, Si2>
where __Origin<'__pin, Si1, Si2>: Unpin,

Auto Trait Implementations§

§

impl<Si1, Si2> Freeze for Fanout<Si1, Si2>
where Si1: Freeze, Si2: Freeze,

§

impl<Si1, Si2> RefUnwindSafe for Fanout<Si1, Si2>
where Si1: RefUnwindSafe, Si2: RefUnwindSafe,

§

impl<Si1, Si2> Send for Fanout<Si1, Si2>
where Si1: Send, Si2: Send,

§

impl<Si1, Si2> Sync for Fanout<Si1, Si2>
where Si1: Sync, Si2: Sync,

§

impl<Si1, Si2> UnwindSafe for Fanout<Si1, Si2>
where Si1: UnwindSafe, Si2: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> Any for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

§

fn type_name(&self) -> &'static str

§

impl<T> AnySync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CheckedConversion for T

source§

fn checked_from<T>(t: T) -> Option<Self>
where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
source§

fn checked_into<T>(self) -> Option<T>
where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<Src, Dest> IntoTuple<Dest> for Src
where Dest: FromTuple<Src>,

§

fn into_tuple(self) -> Dest

source§

impl<T, Outer> IsWrappedBy<Outer> for T
where Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

source§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

source§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> SaturatedConversion for T

source§

fn saturated_from<T>(t: T) -> Self
where Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
source§

fn saturated_into<T>(self) -> T
where Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
§

impl<T, Item> SinkExt<Item> for T
where T: Sink<Item> + ?Sized,

§

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F>
where F: FnMut(U) -> Fut, Fut: Future<Output = Result<Item, E>>, E: From<Self::Error>, Self: Sized,

Composes a function in front of the sink. Read more
§

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F>
where F: FnMut(U) -> St, St: Stream<Item = Result<Item, Self::Error>>, Self: Sized,

Composes a function in front of the sink. Read more
§

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F>
where F: FnOnce(Self::Error) -> E, Self: Sized,

Transforms the error returned by the sink.
§

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E>
where Self: Sized, Self::Error: Into<E>,

Map this sink’s error to a different error type using the Into trait. Read more
§

fn buffer(self, capacity: usize) -> Buffer<Self, Item>
where Self: Sized,

Adds a fixed-size buffer to the current sink. Read more
§

fn close(&mut self) -> Close<'_, Self, Item> ⓘ
where Self: Unpin,

Close the sink.
§

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si>
where Self: Sized, Item: Clone, Si: Sink<Item, Error = Self::Error>,

Fanout items to multiple sinks. Read more
§

fn flush(&mut self) -> Flush<'_, Self, Item> ⓘ
where Self: Unpin,

Flush the sink, processing all pending items. Read more
§

fn send(&mut self, item: Item) -> Send<'_, Self, Item> ⓘ
where Self: Unpin,

A future that completes after the given item has been fully processed into the sink, including flushing. Read more
§

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item> ⓘ
where Self: Unpin,

A future that completes after the given item has been received by the sink. Read more
§

fn send_all<'a, St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St> ⓘ
where St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized, Self: Unpin,

A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
§

fn left_sink<Si2>(self) -> Either<Self, Si2> ⓘ
where Si2: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this sink in an Either sink, making it the left-hand variant of that Either. Read more
§

fn right_sink<Si1>(self) -> Either<Si1, Self> ⓘ
where Si1: Sink<Item, Error = Self::Error>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
§

fn poll_ready_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_ready on Unpin sink types.
§

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error>
where Self: Unpin,

A convenience method for calling Sink::start_send on Unpin sink types.
§

fn poll_flush_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_flush on Unpin sink types.
§

fn poll_close_unpin( &mut self, cx: &mut Context<'_>, ) -> Poll<Result<(), Self::Error>>
where Self: Unpin,

A convenience method for calling Sink::poll_close on Unpin sink types.
§

impl<Item, S> SinkRateLimitExt<Item, S> for S
where S: Sink<Item>,

§

fn ratelimit_sink<D, C, MW>( self, limiter: &RateLimiter<NotKeyed, D, C, MW>, ) -> RatelimitedSink<'_, Item, S, D, C, MW>
where D: DirectStateStore, C: ReasonablyRealtime, MW: RateLimitingMiddleware<<C as Clock>::Instant, NegativeOutcome = NotUntil<<C as Clock>::Instant>>,

Limits the rate at which items can be put into the current sink.
§

fn ratelimit_sink_with_jitter<D, C, MW>( self, limiter: &RateLimiter<NotKeyed, D, C, MW>, jitter: Jitter, ) -> RatelimitedSink<'_, Item, S, D, C, MW>
where D: DirectStateStore, C: ReasonablyRealtime, MW: RateLimitingMiddleware<<C as Clock>::Instant, NegativeOutcome = NotUntil<<C as Clock>::Instant>>,

Limits the rate at which items can be put into the current sink, with a randomized wait period.
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T> UncheckedInto<T> for S
where T: UncheckedFrom<S>,

source§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
source§

impl<T, S> UniqueSaturatedInto<T> for S
where T: Bounded, S: TryInto<T>,

source§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for T
where T: Debug,

source§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

source§

impl<T> MaybeRefUnwindSafe for T
where T: RefUnwindSafe,

§

impl<T> MaybeSend for T
where T: Send,