pub struct Pallet<T>(_);
Expand description

The Pallet struct, the main type that implements traits and standalone functions within the pallet.

Implementations§

source§

impl<T: Config> Pallet<T>

source

pub fn create_swap( origin: OriginFor<T>, target: T::AccountId, hashed_proof: HashedProof, action: T::SwapAction, duration: BlockNumberFor<T> ) -> DispatchResult

Register a new atomic swap, declaring an intention to send funds from origin to target on the current blockchain. The target can claim the fund using the revealed proof. If the fund is not claimed after duration blocks, then the sender can cancel the swap.

The dispatch origin for this call must be Signed.

  • target: Receiver of the atomic swap.
  • hashed_proof: The blake2_256 hash of the secret proof.
  • balance: Funds to be sent from origin.
  • duration: Locked duration of the atomic swap. For safety reasons, it is recommended that the revealer uses a shorter duration than the counterparty, to prevent the situation where the revealer reveals the proof too late around the end block.
source

pub fn claim_swap( origin: OriginFor<T>, proof: Vec<u8>, action: T::SwapAction ) -> DispatchResult

Claim an atomic swap.

The dispatch origin for this call must be Signed.

  • proof: Revealed proof of the claim.
  • action: Action defined in the swap, it must match the entry in blockchain. Otherwise the operation fails. This is used for weight calculation.
source

pub fn cancel_swap( origin: OriginFor<T>, target: T::AccountId, hashed_proof: HashedProof ) -> DispatchResult

Cancel an atomic swap. Only possible after the originally set duration has passed.

The dispatch origin for this call must be Signed.

  • target: Target of the original atomic swap.
  • hashed_proof: Hashed proof of the original atomic swap.

Trait Implementations§

source§

impl<T: Config> Callable<T> for Pallet<T>

source§

impl<T> Clone for Pallet<T>

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl<T> Debug for Pallet<T>

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl<T: Config> GetStorageVersion for Pallet<T>

§

type CurrentStorageVersion = NoStorageVersionSet

This will be filled out by the pallet macro. Read more
source§

fn current_storage_version() -> Self::CurrentStorageVersion

Returns the current storage version as supported by the pallet.
source§

fn on_chain_storage_version() -> StorageVersion

Returns the on-chain storage version of the pallet as stored in the storage.
source§

impl<T: Config> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

source§

fn on_initialize(_n: BlockNumber) -> Weight

Block initialization hook. This is called at the very beginning of block execution. Read more
source§

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution. Read more
source§

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before Hooks::on_finalize). Read more
source§

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by FRAME. Read more
source§

fn try_state(_n: BlockNumber) -> Result<(), DispatchError>

Execute the sanity checks of this pallet, per block. Read more
source§

fn pre_upgrade() -> Result<Vec<u8, Global>, DispatchError>

Execute some pre-checks prior to a runtime upgrade. Read more
source§

fn post_upgrade(_state: Vec<u8, Global>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade. Read more
source§

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main wasm runtime. Read more
source§

fn integrity_test()

Check the integrity of this pallet’s configuration. Read more
source§

impl<T: Config> IntegrityTest for Pallet<T>

source§

impl<T: Config> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

source§

fn offchain_worker(n: BlockNumberFor<T>)

This function is being called after every block import (when fully synced). Read more
source§

impl<T: Config> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

source§

impl<T: Config> OnGenesis for Pallet<T>

source§

fn on_genesis()

Something that should happen at genesis.
source§

impl<T: Config> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

source§

fn on_idle(n: BlockNumberFor<T>, remaining_weight: Weight) -> Weight

source§

impl<T: Config> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

source§

impl<T: Config> OnRuntimeUpgrade for Pallet<T>

source§

fn on_runtime_upgrade() -> Weight

source§

fn pre_upgrade() -> Result<Vec<u8>, TryRuntimeError>

source§

fn post_upgrade(state: Vec<u8>) -> Result<(), TryRuntimeError>

source§

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

The expected and default behavior of this method is to handle executing pre_upgrade -> on_runtime_upgrade -> post_upgrade hooks for a migration. Read more
source§

impl<T: Config> PalletInfoAccess for Pallet<T>

source§

fn index() -> usize

Index of the pallet as configured in the runtime.
source§

fn name() -> &'static str

Name of the pallet as configured in the runtime.
source§

fn module_name() -> &'static str

Name of the Rust module containing the pallet.
source§

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.
source§

impl<T: Config> PalletsInfoAccess for Pallet<T>

source§

fn count() -> usize

The number of pallets’ information that this type represents. Read more
source§

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.
source§

impl<T> PartialEq<Pallet<T>> for Pallet<T>

source§

fn eq(&self, other: &Self) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl<T: Config> StorageInfoTrait for Pallet<T>

source§

impl<T: Config> TryState<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T>

source§

fn try_state( n: BlockNumberFor<T>, _s: TryStateSelect ) -> Result<(), TryRuntimeError>

Execute the state checks.
source§

impl<T: Config> WhitelistedStorageKeys for Pallet<T>

source§

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.
source§

impl<T> Eq for Pallet<T>

Auto Trait Implementations§

§

impl<T> RefUnwindSafe for Pallet<T>where T: RefUnwindSafe,

§

impl<T> Send for Pallet<T>where T: Send,

§

impl<T> Sync for Pallet<T>where T: Sync,

§

impl<T> Unpin for Pallet<T>where T: Unpin,

§

impl<T> UnwindSafe for Pallet<T>where T: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CheckedConversion for T

source§

fn checked_from<T>(t: T) -> Option<Self>where Self: TryFrom<T>,

Convert from a value of T into an equivalent instance of Option<Self>. Read more
source§

fn checked_into<T>(self) -> Option<T>where Self: TryInto<T>,

Consume self to return Some equivalent value of Option<T>. Read more
source§

impl<T> DynClone for Twhere T: Clone,

source§

fn __clone_box(&self, _: Private) -> *mut ()

source§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Qwhere Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IsType<T> for T

source§

fn from_ref(t: &T) -> &T

Cast reference.
source§

fn into_ref(&self) -> &T

Cast reference.
source§

fn from_mut(t: &mut T) -> &mut T

Cast mutable reference.
source§

fn into_mut(&mut self) -> &mut T

Cast mutable reference.
source§

impl<T, Outer> IsWrappedBy<Outer> for Twhere Outer: AsRef<T> + AsMut<T> + From<T>, T: From<Outer>,

source§

fn from_ref(outer: &Outer) -> &T

Get a reference to the inner from the outer.

source§

fn from_mut(outer: &mut Outer) -> &mut T

Get a mutable reference to the inner from the outer.

§

impl<T> Pointable for T

§

const ALIGN: usize = mem::align_of::<T>()

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> SaturatedConversion for T

source§

fn saturated_from<T>(t: T) -> Selfwhere Self: UniqueSaturatedFrom<T>,

Convert from a value of T into an equivalent instance of Self. Read more
source§

fn saturated_into<T>(self) -> Twhere Self: UniqueSaturatedInto<T>,

Consume self to return an equivalent value of T. Read more
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
const: unstable · source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<S, T> UncheckedInto<T> for Swhere T: UncheckedFrom<S>,

source§

fn unchecked_into(self) -> T

The counterpart to unchecked_from.
source§

impl<T, S> UniqueSaturatedInto<T> for Swhere T: Bounded, S: TryInto<T>,

source§

fn unique_saturated_into(self) -> T

Consume self to return an equivalent value of T.
§

impl<V, T> VZip<V> for Twhere V: MultiLane<T>,

§

fn vzip(self) -> V

source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> JsonSchemaMaybe for T

§

impl<T> MaybeDebug for Twhere T: Debug,

source§

impl<T> MaybeRefUnwindSafe for Twhere T: RefUnwindSafe,

source§

impl<T> Member for Twhere T: Send + Sync + Debug + Eq + PartialEq<T> + Clone + 'static,