Struct wasmtime::Func

pub struct Func(/* private fields */);

A WebAssembly function which can be called.

This type can represent either an exported function from a WebAssembly module or a host-defined function which can be used to satisfy an import of a module. Func and can be used to both instantiate an Instance as well as be extracted from an Instance.

A Func “belongs” to the store that it was originally created within. Operations on a Func only work with the store it belongs to, and if another store is passed in by accident then methods will panic.

Func and async

Functions from the perspective of WebAssembly are always synchronous. You might have an async function in Rust, however, which you’d like to make available from WebAssembly. Wasmtime supports asynchronously calling WebAssembly through native stack switching. You can get some more information about asynchronous configs, but from the perspective of Func it’s important to know that whether or not your Store is asynchronous will dictate whether you call functions through Func::call or [Func::call_async] (or the typed wrappers such as TypedFunc::call vs [TypedFunc::call_async]).

To Func::call or to Func::typed().call()

There’s a 2x2 matrix of methods to call Func. Invocations can either be asynchronous or synchronous. They can also be statically typed or not. Whether or not an invocation is asynchronous is indicated via the method being async and call_async being the entry point. Otherwise for statically typed or not your options are:

• Dynamically typed - if you don’t statically know the signature of the function that you’re calling you’ll be using Func::call or [Func::call_async]. These functions take a variable-length slice of “boxed” arguments in their Val representation. Additionally the results are returned as an owned slice of Val. These methods are not optimized due to the dynamic type checks that must occur, in addition to some dynamic allocations for where to put all the arguments. While this allows you to call all possible wasm function signatures, if you’re looking for a speedier alternative you can also use…

• Statically typed - if you statically know the type signature of the wasm function you’re calling, then you’ll want to use the Func::typed method to acquire an instance of TypedFunc. This structure is static proof that the underlying wasm function has the ascripted type, and type validation is only done once up-front. The TypedFunc::call and [TypedFunc::call_async] methods are much more efficient than Func::call and [Func::call_async] because the type signature is statically known. This eschews runtime checks as much as possible to get into wasm as fast as possible.

Examples

One way to get a Func is from an Instance after you’ve instantiated it:

let engine = Engine::default();
let module = Module::new(&engine, r#"(module (func (export "foo")))"#)?;
let mut store = Store::new(&engine, ());
let instance = Instance::new(&mut store, &module, &[])?;
let foo = instance.get_func(&mut store, "foo").expect("export wasn't a function");

// Work with `foo` as a `Func` at this point, such as calling it
// dynamically...
match foo.call(&mut store, &[], &mut []) {
    Ok(()) => { /* ... */ }
    Err(trap) => {
        panic!("execution of `foo` resulted in a wasm trap: {}", trap);
    }
}
foo.call(&mut store, &[], &mut [])?;

// ... or we can make a static assertion about its signature and call it.
// Our first call here can fail if the signatures don't match, and then the
// second call can fail if the function traps (like the `match` above).
let foo = foo.typed::<(), ()>(&store)?;
foo.call(&mut store, ())?;

You can also use the wrap function to create a Func

let mut store = Store::<()>::default();

// Create a custom `Func` which can execute arbitrary code inside of the
// closure.
let add = Func::wrap(&mut store, |a: i32, b: i32| -> i32 { a + b });

// Next we can hook that up to a wasm module which uses it.
let module = Module::new(
    store.engine(),
    r#"
        (module
            (import "" "" (func $add (param i32 i32) (result i32)))
            (func (export "call_add_twice") (result i32)
                i32.const 1
                i32.const 2
                call $add
                i32.const 3
                i32.const 4
                call $add
                i32.add))
    "#,
)?;
let instance = Instance::new(&mut store, &module, &[add.into()])?;
let call_add_twice = instance.get_typed_func::<(), i32>(&mut store, "call_add_twice")?;

assert_eq!(call_add_twice.call(&mut store, ())?, 10);

Or you could also create an entirely dynamic Func!

let mut store = Store::<()>::default();

// Here we need to define the type signature of our `Double` function and
// then wrap it up in a `Func`
let double_type = wasmtime::FuncType::new(
    [wasmtime::ValType::I32].iter().cloned(),
    [wasmtime::ValType::I32].iter().cloned(),
);
let double = Func::new(&mut store, double_type, |_, params, results| {
    let mut value = params[0].unwrap_i32();
    value *= 2;
    results[0] = value.into();
    Ok(())
});

let module = Module::new(
    store.engine(),
    r#"
        (module
            (import "" "" (func $double (param i32) (result i32)))
            (func $start
                i32.const 1
                call $double
                drop)
            (start $start))
    "#,
)?;
let instance = Instance::new(&mut store, &module, &[double.into()])?;
// .. work with `instance` if necessary

Implementations

impl Func

pub fn new<T>( store: impl AsContextMut<Data = T>, ty: FuncType, func: impl Fn(Caller<'_, T>, &[Val], &mut [Val]) -> Result<()> + Send + Sync + 'static, ) -> Self

Creates a new Func with the given arguments, typically to create a host-defined function to pass as an import to a module.

• store - the store in which to create this Func, which will own the return value.

• ty - the signature of this function, used to indicate what the inputs and outputs are.

• func - the native code invoked whenever this Func will be called. This closure is provided a Caller as its first argument to learn information about the caller, and then it’s passed a list of parameters as a slice along with a mutable slice of where to write results.

Note that the implementation of func must adhere to the ty signature given, error or traps may occur if it does not respect the ty signature. For example if the function type declares that it returns one i32 but the func closures does not write anything into the results slice then a trap may be generated.

Additionally note that this is quite a dynamic function since signatures are not statically known. For a more performant and ergonomic Func it’s recommended to use Func::wrap if you can because with statically known signatures Wasmtime can optimize the implementation much more.

For more information about Send + Sync + 'static requirements on the func, see Func::wrap.

Errors

The host-provided function here returns a Result<()>. If the function returns Ok(()) then that indicates that the host function completed successfully and wrote the result into the &mut [Val] argument.

If the function returns Err(e), however, then this is equivalent to the host function triggering a trap for wasm. WebAssembly execution is immediately halted and the original caller of Func::call, for example, will receive the error returned here (possibly with WasmBacktrace context information attached).

For more information about errors in Wasmtime see the Trap documentation.

pub unsafe fn new_unchecked<T>( store: impl AsContextMut<Data = T>, ty: FuncType, func: impl Fn(Caller<'_, T>, &mut [ValRaw]) -> Result<()> + Send + Sync + 'static, ) -> Self

Creates a new Func with the given arguments, although has fewer runtime checks than Func::new.

This function takes a callback of a different signature than Func::new, instead receiving a raw pointer with a list of ValRaw structures. These values have no type information associated with them so it’s up to the caller to provide a function that will correctly interpret the list of values as those coming from the ty specified.

If you’re calling this from Rust it’s recommended to either instead use Func::new or Func::wrap. The Func::wrap API, in particular, is both safer and faster than this API.

Errors

See Func::new for the behavior of returning an error from the host function provided here.

Unsafety

This function is not safe because it’s not known at compile time that the func provided correctly interprets the argument types provided to it, or that the results it produces will be of the correct type.

pub fn wrap<T, Params, Results>( store: impl AsContextMut<Data = T>, func: impl IntoFunc<T, Params, Results>, ) -> Func

Creates a new Func from the given Rust closure.

This function will create a new Func which, when called, will execute the given Rust closure. Unlike Func::new the target function being called is known statically so the type signature can be inferred. Rust types will map to WebAssembly types as follows:

Rust Argument Type	WebAssembly Type
i32	i32
u32	i32
i64	i64
u64	i64
f32	f32
f64	f64
(not supported)	v128
Option<Func>	funcref
Option<ExternRef>	externref

Any of the Rust types can be returned from the closure as well, in addition to some extra types

Rust Return Type	WebAssembly Return Type	Meaning
()	nothing	no return value
T	T	a single return value
(T1, T2, ...)	T1 T2 ...	multiple returns

Note that all return types can also be wrapped in Result<_> to indicate that the host function can generate a trap as well as possibly returning a value.

Finally you can also optionally take Caller as the first argument of your closure. If inserted then you’re able to inspect the caller’s state, for example the Memory it has exported so you can read what pointers point to.

Note that when using this API, the intention is to create as thin of a layer as possible for when WebAssembly calls the function provided. With sufficient inlining and optimization the WebAssembly will call straight into func provided, with no extra fluff entailed.

Why Send + Sync + 'static?

All host functions defined in a Store (including those from Func::new and other constructors) require that the func provided is Send + Sync + 'static. Additionally host functions always are Fn as opposed to FnMut or FnOnce. This can at-a-glance feel restrictive since the closure cannot close over as many types as before. The reason for this, though, is to ensure that Store<T> can implement both the Send and Sync traits.

Fear not, however, because this isn’t as restrictive as it seems! Host functions are provided a Caller<'_, T> argument which allows access to the host-defined data within the Store. The T type is not required to be any of Send, Sync, or 'static! This means that you can store whatever you’d like in T and have it accessible by all host functions. Additionally mutable access to T is allowed through Caller::data_mut.

Most host-defined Func values provide closures that end up not actually closing over any values. These zero-sized types will use the context from Caller for host-defined information.

Errors

The closure provided here to wrap can optionally return a Result<T>. Returning Ok(t) represents the host function successfully completing with the t result. Returning Err(e), however, is equivalent to raising a custom wasm trap. Execution of WebAssembly does not resume and the stack is unwound to the original caller of the function where the error is returned.

For more information about errors in Wasmtime see the Trap documentation.

Examples

First up we can see how simple wasm imports can be implemented, such as a function that adds its two arguments and returns the result.

let add = Func::wrap(&mut store, |a: i32, b: i32| a + b);
let module = Module::new(
    store.engine(),
    r#"
        (module
            (import "" "" (func $add (param i32 i32) (result i32)))
            (func (export "foo") (param i32 i32) (result i32)
                local.get 0
                local.get 1
                call $add))
    "#,
)?;
let instance = Instance::new(&mut store, &module, &[add.into()])?;
let foo = instance.get_typed_func::<(i32, i32), i32>(&mut store, "foo")?;
assert_eq!(foo.call(&mut store, (1, 2))?, 3);

We can also do the same thing, but generate a trap if the addition overflows:

let add = Func::wrap(&mut store, |a: i32, b: i32| {
    match a.checked_add(b) {
        Some(i) => Ok(i),
        None => anyhow::bail!("overflow"),
    }
});
let module = Module::new(
    store.engine(),
    r#"
        (module
            (import "" "" (func $add (param i32 i32) (result i32)))
            (func (export "foo") (param i32 i32) (result i32)
                local.get 0
                local.get 1
                call $add))
    "#,
)?;
let instance = Instance::new(&mut store, &module, &[add.into()])?;
let foo = instance.get_typed_func::<(i32, i32), i32>(&mut store, "foo")?;
assert_eq!(foo.call(&mut store, (1, 2))?, 3);
assert!(foo.call(&mut store, (i32::max_value(), 1)).is_err());

And don’t forget all the wasm types are supported!

let debug = Func::wrap(&mut store, |a: i32, b: u32, c: f32, d: i64, e: u64, f: f64| {

    println!("a={}", a);
    println!("b={}", b);
    println!("c={}", c);
    println!("d={}", d);
    println!("e={}", e);
    println!("f={}", f);
});
let module = Module::new(
    store.engine(),
    r#"
        (module
            (import "" "" (func $debug (param i32 i32 f32 i64 i64 f64)))
            (func (export "foo")
                i32.const -1
                i32.const 1
                f32.const 2
                i64.const -3
                i64.const 3
                f64.const 4
                call $debug))
    "#,
)?;
let instance = Instance::new(&mut store, &module, &[debug.into()])?;
let foo = instance.get_typed_func::<(), ()>(&mut store, "foo")?;
foo.call(&mut store, ())?;

Finally if you want to get really fancy you can also implement imports that read/write wasm module’s memory

use std::str;

let log_str = Func::wrap(&mut store, |mut caller: Caller<'_, ()>, ptr: i32, len: i32| {
    let mem = match caller.get_export("memory") {
        Some(Extern::Memory(mem)) => mem,
        _ => anyhow::bail!("failed to find host memory"),
    };
    let data = mem.data(&caller)
        .get(ptr as u32 as usize..)
        .and_then(|arr| arr.get(..len as u32 as usize));
    let string = match data {
        Some(data) => match str::from_utf8(data) {
            Ok(s) => s,
            Err(_) => anyhow::bail!("invalid utf-8"),
        },
        None => anyhow::bail!("pointer/length out of bounds"),
    };
    assert_eq!(string, "Hello, world!");
    println!("{}", string);
    Ok(())
});
let module = Module::new(
    store.engine(),
    r#"
        (module
            (import "" "" (func $log_str (param i32 i32)))
            (func (export "foo")
                i32.const 4   ;; ptr
                i32.const 13  ;; len
                call $log_str)
            (memory (export "memory") 1)
            (data (i32.const 4) "Hello, world!"))
    "#,
)?;
let instance = Instance::new(&mut store, &module, &[log_str.into()])?;
let foo = instance.get_typed_func::<(), ()>(&mut store, "foo")?;
foo.call(&mut store, ())?;

pub fn ty(&self, store: impl AsContext) -> FuncType

Returns the underlying wasm type that this Func has.

Panics

Panics if store does not own this function.

pub fn call( &self, store: impl AsContextMut, params: &[Val], results: &mut [Val], ) -> Result<()>

Invokes this function with the params given and writes returned values to results.

The params here must match the type signature of this Func, or an error will occur. Additionally results must have the same length as the number of results for this function. Calling this function will synchronously execute the WebAssembly function referenced to get the results.

This function will return Ok(()) if execution completed without a trap or error of any kind. In this situation the results will be written to the provided results array.

Errors

Any error which occurs throughout the execution of the function will be returned as Err(e). The Error type can be inspected for the precise error cause such as:

• Trap - indicates that a wasm trap happened and execution was halted.
• WasmBacktrace - optionally included on errors for backtrace information of the trap/error.
• Other string-based errors to indicate issues such as type errors with params.
• Any host-originating error originally returned from a function defined via Func::new, for example.

Errors typically indicate that execution of WebAssembly was halted mid-way and did not complete after the error condition happened.

Panics

This function will panic if called on a function belonging to an async store. Asynchronous stores must always use call_async. initiates a panic. Also panics if store does not own this function.

pub unsafe fn call_unchecked( &self, store: impl AsContextMut, params_and_returns: *mut ValRaw, ) -> Result<()>

Invokes this function in an “unchecked” fashion, reading parameters and writing results to params_and_returns.

This function is the same as Func::call except that the arguments and results both use a different representation. If possible it’s recommended to use Func::call if safety isn’t necessary or to use Func::typed in conjunction with TypedFunc::call since that’s both safer and faster than this method of invoking a function.

Note that if this function takes externref arguments then it will not automatically GC unlike the Func::call and TypedFunc::call functions. This means that if this function is invoked many times with new ExternRef values and no other GC happens via any other means then no values will get collected.

Errors

For more information about errors see the Func::call documentation.

Unsafety

This function is unsafe because the params_and_returns argument is not validated at all. It must uphold invariants such as:

• It’s a valid pointer to an array
• It has enough space to store all parameters
• It has enough space to store all results (not at the same time as parameters)
• Parameters are initially written to the array and have the correct types and such.
• Reference types like externref and funcref are valid at the time of this call and for the store specified.

These invariants are all upheld for you with Func::call and TypedFunc::call.

pub unsafe fn from_raw(store: impl AsContextMut, raw: usize) -> Option<Func>

Converts the raw representation of a funcref into an Option<Func>

This is intended to be used in conjunction with Func::new_unchecked, Func::call_unchecked, and ValRaw with its funcref field.

Unsafety

This function is not safe because raw is not validated at all. The caller must guarantee that raw is owned by the store provided and is valid within the store.

pub unsafe fn to_raw(&self, store: impl AsContext) -> usize

Extracts the raw value of this Func, which is owned by store.

This function returns a value that’s suitable for writing into the funcref field of the ValRaw structure.

Unsafety

The returned value is only valid for as long as the store is alive and this function is properly rooted within it. Additionally this function should not be liberally used since it’s a very low-level knob.

pub fn typed<Params, Results>( &self, store: impl AsContext, ) -> Result<TypedFunc<Params, Results>>

where Params: WasmParams, Results: WasmResults,

Attempts to extract a typed object from this Func through which the function can be called.

This function serves as an alternative to Func::call and [Func::call_async]. This method performs a static type check (using the Params and Results type parameters on the underlying wasm function. If the type check passes then a TypedFunc object is returned, otherwise an error is returned describing the typecheck failure.

The purpose of this relative to Func::call is that it’s much more efficient when used to invoke WebAssembly functions. With the types statically known far less setup/teardown is required when invoking WebAssembly. If speed is desired then this function is recommended to be used instead of Func::call (which is more general, hence its slowdown).

The Params type parameter is used to describe the parameters of the WebAssembly function. This can either be a single type (like i32), or a tuple of types representing the list of parameters (like (i32, f32, f64)). Additionally you can use () to represent that the function has no parameters.

The Results type parameter is used to describe the results of the function. This behaves the same way as Params, but just for the results of the function.

Translation between Rust types and WebAssembly types looks like:

WebAssembly	Rust
i32	i32 or u32
i64	i64 or u64
f32	f32
f64	f64
externref	Option<ExternRef>
funcref	Option<Func>
v128	not supported

(note that this mapping is the same as that of Func::wrap).

Note that once the TypedFunc return value is acquired you’ll use either TypedFunc::call or [TypedFunc::call_async] as necessary to actually invoke the function. This method does not invoke any WebAssembly code, it simply performs a typecheck before returning the TypedFunc value.

This method also has a convenience wrapper as Instance::get_typed_func to directly get a typed function value from an Instance.

Errors

This function will return an error if Params or Results does not match the native type of this WebAssembly function.

Panics

This method will panic if store does not own this function.

Examples

An end-to-end example of calling a function which takes no parameters and has no results:

let engine = Engine::default();
let mut store = Store::new(&engine, ());
let module = Module::new(&engine, r#"(module (func (export "foo")))"#)?;
let instance = Instance::new(&mut store, &module, &[])?;
let foo = instance.get_func(&mut store, "foo").expect("export wasn't a function");

// Note that this call can fail due to the typecheck not passing, but
// in our case we statically know the module so we know this should
// pass.
let typed = foo.typed::<(), ()>(&store)?;

// Note that this can fail if the wasm traps at runtime.
typed.call(&mut store, ())?;

You can also pass in multiple parameters and get a result back

let typed = add.typed::<(i32, i64), f32>(&store)?;
assert_eq!(typed.call(&mut store, (1, 2))?, 3.0);

and similarly if a function has multiple results you can bind that too

let typed = add_with_overflow.typed::<(u32, u32), (u32, i32)>(&store)?;
let (result, overflow) = typed.call(&mut store, (u32::max_value(), 2))?;
assert_eq!(result, 1);
assert_eq!(overflow, 1);

Trait Implementations

impl Clone for Func

fn clone(&self) -> Func

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Func

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl From<Func> for Extern

fn from(r: Func) -> Self

Converts to this type from the input type.

impl From<Func> for Val

fn from(val: Func) -> Val

Converts to this type from the input type.

impl Copy for Func