Type Alias TechnicalMembership

pub type TechnicalMembership = Pallet<Runtime, Instance1>;

Aliased Type

struct TechnicalMembership(/* private fields */);

Implementations

impl<T, I> Pallet<T, I>

where T: Config<I>, I: 'static,

pub fn add_member( origin: <T as Config>::RuntimeOrigin, who: <<T as Config>::Lookup as StaticLookup>::Source, ) -> Result<PostDispatchInfo, DispatchErrorWithPostInfo<PostDispatchInfo>>

Add a member who to the set.

May only be called from T::AddOrigin.

pub fn remove_member( origin: <T as Config>::RuntimeOrigin, who: <<T as Config>::Lookup as StaticLookup>::Source, ) -> Result<PostDispatchInfo, DispatchErrorWithPostInfo<PostDispatchInfo>>

Remove a member who from the set.

May only be called from T::RemoveOrigin.

pub fn swap_member( origin: <T as Config>::RuntimeOrigin, remove: <<T as Config>::Lookup as StaticLookup>::Source, add: <<T as Config>::Lookup as StaticLookup>::Source, ) -> Result<PostDispatchInfo, DispatchErrorWithPostInfo<PostDispatchInfo>>

Swap out one member remove for another add.

May only be called from T::SwapOrigin.

Prime membership is not passed from remove to add, if extant.

pub fn reset_members( origin: <T as Config>::RuntimeOrigin, members: Vec<<T as Config>::AccountId>, ) -> Result<(), DispatchError>

Change the membership to a new set, disregarding the existing membership. Be nice and pass members pre-sorted.

May only be called from T::ResetOrigin.

pub fn change_key( origin: <T as Config>::RuntimeOrigin, new: <<T as Config>::Lookup as StaticLookup>::Source, ) -> Result<PostDispatchInfo, DispatchErrorWithPostInfo<PostDispatchInfo>>

Swap out the sending member for some other key new.

May only be called from Signed origin of a current member.

Prime membership is passed from the origin account to new, if extant.

pub fn set_prime( origin: <T as Config>::RuntimeOrigin, who: <<T as Config>::Lookup as StaticLookup>::Source, ) -> Result<PostDispatchInfo, DispatchErrorWithPostInfo<PostDispatchInfo>>

Set the prime member. Must be a current member.

May only be called from T::PrimeOrigin.

pub fn clear_prime( origin: <T as Config>::RuntimeOrigin, ) -> Result<(), DispatchError>

Remove the prime member if it exists.

May only be called from T::PrimeOrigin.

impl<T, I> Pallet<T, I>

where T: Config<I>, I: 'static,

pub fn members() -> BoundedVec<<T as Config>::AccountId, <T as Config<I>>::MaxMembers>

The current membership, stored as an ordered Vec.

pub fn prime() -> Option<<T as Config>::AccountId>

The current prime member, if one exists.

Trait Implementations

impl<T, I> BeforeAllRuntimeMigrations for Pallet<T, I>

where T: Config<I>, I: 'static,

fn before_all_runtime_migrations() -> Weight

Something that should happen before runtime migrations are executed.

impl<T, I> Benchmarking for Pallet<T, I>

where T: Config<I> + Config, I: 'static,

fn benchmarks(extra: bool) -> Vec<BenchmarkMetadata>

Get the benchmarks available for this pallet. Generally there is one benchmark per extrinsic, so these are sometimes just called “extrinsics”.

fn run_benchmark( extrinsic: &[u8], c: &[(BenchmarkParameter, u32)], whitelist: &[TrackedStorageKey], verify: bool, internal_repeats: u32, ) -> Result<Vec<BenchmarkResult>, BenchmarkError>

Run the benchmarks for this pallet.

impl<T, I> Callable<T> for Pallet<T, I>

where T: Config<I>, I: 'static,

type RuntimeCall = Call<T, I>

impl<T, I> Clone for Pallet<T, I>

fn clone(&self) -> Pallet<T, I>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T, I> Contains<<T as Config>::AccountId> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn contains(t: &<T as Config>::AccountId) -> bool

Return true if this “contains” the given value t.

impl<T, I> Debug for Pallet<T, I>

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T, I> DispatchViewFunction for Pallet<T, I>

where T: Config<I>, I: 'static,

fn dispatch_view_function<O>( id: &ViewFunctionId, input: &mut &[u8], output: &mut O, ) -> Result<(), ViewFunctionDispatchError>

where O: Output,

impl<T, I> GetStorageVersion for Pallet<T, I>

where T: Config<I>, I: 'static,

type InCodeStorageVersion = StorageVersion

This type is generated by the pallet macro.

fn in_code_storage_version() -> <Pallet<T, I> as GetStorageVersion>::InCodeStorageVersion

Returns the in-code storage version as specified in the storage_version attribute, or NoStorageVersionSet if the attribute is missing.

fn on_chain_storage_version() -> StorageVersion

Returns the storage version of the pallet as last set in the actual on-chain storage.

fn current_storage_version() -> Self::InCodeStorageVersion

👎Deprecated: This method has been renamed to in_code_storage_version and will be removed after March 2024.

DEPRECATED: Use Self::current_storage_version instead.

impl<T, I> Hooks<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn on_initialize(_n: BlockNumber) -> Weight

Block initialization hook. This is called at the very beginning of block execution.

fn on_finalize(_n: BlockNumber)

Block finalization hook. This is called at the very end of block execution.

fn on_idle(_n: BlockNumber, _remaining_weight: Weight) -> Weight

Hook to consume a block’s idle time. This will run when the block is being finalized (before Hooks::on_finalize).

fn on_poll(_n: BlockNumber, _weight: &mut WeightMeter)

A hook to run logic after inherent application.

fn on_runtime_upgrade() -> Weight

Hook executed when a code change (aka. a “runtime upgrade”) is detected by the FRAME Executive pallet.

fn try_state(_n: BlockNumber) -> Result<(), DispatchError>

Execute the sanity checks of this pallet, per block.

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

Execute some pre-checks prior to a runtime upgrade.

fn post_upgrade(_state: Vec<u8>) -> Result<(), DispatchError>

Execute some post-checks after a runtime upgrade.

fn offchain_worker(_n: BlockNumber)

Implementing this function on a pallet allows you to perform long-running tasks that are dispatched as separate threads, and entirely independent of the main blockchain execution.

fn integrity_test()

Check the integrity of this pallet’s configuration.

impl<T, I> IntegrityTest for Pallet<T, I>

where T: Config<I>, I: 'static,

fn integrity_test()

See Hooks::integrity_test.

impl<T, I> OffchainWorker<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn offchain_worker( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, )

This function is being called after every block import (when fully synced).

impl<T, I> OnFinalize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn on_finalize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, )

See Hooks::on_finalize.

impl<T, I> OnGenesis for Pallet<T, I>

where T: Config<I>, I: 'static,

fn on_genesis()

Something that should happen at genesis.

impl<T, I> OnIdle<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn on_idle( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, remaining_weight: Weight, ) -> Weight

See Hooks::on_idle.

impl<T, I> OnInitialize<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn on_initialize( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, ) -> Weight

See Hooks::on_initialize.

impl<T, I> OnPoll<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn on_poll( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, weight: &mut WeightMeter, )

Code to execute every now and then at the beginning of the block after inherent application.

impl<T, I> OnRuntimeUpgrade for Pallet<T, I>

where T: Config<I>, I: 'static,

fn on_runtime_upgrade() -> Weight

See Hooks::on_runtime_upgrade.

fn pre_upgrade() -> Result<Vec<u8>, DispatchError>

See Hooks::pre_upgrade.

fn post_upgrade(state: Vec<u8>) -> Result<(), DispatchError>

See Hooks::post_upgrade.

fn try_on_runtime_upgrade(checks: bool) -> Result<Weight, DispatchError>

The expected and default behavior of this method is to handle executing pre_upgrade -> on_runtime_upgrade -> post_upgrade hooks for a migration.

impl<T, I> PalletInfoAccess for Pallet<T, I>

where T: Config<I>, I: 'static,

fn index() -> usize

Index of the pallet as configured in the runtime.

fn name() -> &'static str

Name of the pallet as configured in the runtime.

fn name_hash() -> [u8; 16]

Two128 hash of name.

fn module_name() -> &'static str

Name of the Rust module containing the pallet.

fn crate_version() -> CrateVersion

Version of the crate containing the pallet.

impl<T, I> PalletsInfoAccess for Pallet<T, I>

where T: Config<I>, I: 'static,

fn count() -> usize

The number of pallets’ information that this type represents.

fn infos() -> Vec<PalletInfoData>

All of the pallets’ information that this type represents.

impl<T, I> PartialEq for Pallet<T, I>

fn eq(&self, other: &Pallet<T, I>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T, I> SortedMembers<<T as Config>::AccountId> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn sorted_members() -> Vec<<T as Config>::AccountId>

Get a vector of all members in the set, ordered.

fn count() -> usize

Get the number of items in the set.

fn add(new_member: &<T as Config>::AccountId)

Add an item that would satisfy contains. It does not make sure any other state is correctly maintained or generated.

fn contains(t: &T) -> bool

Return true if this “contains” the given value t.

impl<T, I> StorageInfoTrait for Pallet<T, I>

where T: Config<I>, I: 'static,

fn storage_info() -> Vec<StorageInfo>

impl<T, I> TryDecodeEntireStorage for Pallet<T, I>

where T: Config<I>, I: 'static,

fn try_decode_entire_state() -> Result<usize, Vec<TryDecodeEntireStorageError>>

Decode the entire data under the given storage, returning Ok(bytes_decoded) if success.

impl<T, I> TryState<<<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number> for Pallet<T, I>

where T: Config<I>, I: 'static,

fn try_state( n: <<<T as Config>::Block as HeaderProvider>::HeaderT as Header>::Number, _s: Select, ) -> Result<(), DispatchError>

Execute the state checks.

impl<T, I> ViewFunctionIdPrefix for Pallet<T, I>

where T: Config<I>, I: 'static,

fn prefix() -> [u8; 16]

impl<T, I> WhitelistedStorageKeys for Pallet<T, I>

where T: Config<I>, I: 'static,

fn whitelisted_storage_keys() -> Vec<TrackedStorageKey>

Returns a Vec<TrackedStorageKey> indicating the storage keys that should be whitelisted during benchmarking. This means that those keys will be excluded from the benchmarking performance calculation.

impl<T, I> Eq for Pallet<T, I>